High resolution performance analysis of micro-trigeneration in an energy-efficient residential building

Trigeneration has long been proposed as a means to improve energy-efficiency for large and medium sized buildings. To curb increasing energy demand in the residential sector, researchers are now focusing their attention on adapting trigeneration to residential buildings. Literature is full of examples pertaining to the performance of trigeneration in large and medium sized commercial buildings, however little is known on the performance of micro-trigeneration inside residential buildings, particularly under a range of operating conditions. To understand the influence that parameters such as changes in thermal and electrical loading or different plant configurations have on the performance of micro-trigeneration, this research makes use of a detailed model of a Maltese apartment building, and associated micro-trigeneration system. The performance of the model is simulated using a whole building simulation tool run at high-resolution minute time frequency over a number of different operating conditions and scenarios. Each scenario was then assessed on the basis of the system's energetic, environmental and economic performance. The results show that, compared to separate generation the use of a residential micro-trigeneration system reduces primary energy consumption by about 40%, but also that the system's financial performance is highly susceptible to the operating conditions

The development and calibration of a generic dynamic absorption chiller model

Although absorption cooling has been available for many years, the technology has typically been viewed as a poorly performing alternative to vapour compression refrigeration. Rising energy prices and the requirement to improve energy efficiency is however driving renewed interest in the technology, particularly within the context of combined cooling, heat and power systems (CCHP) for buildings. In order to understand the performance of absorption cooling, numerous models are available in the literature. However, the complexities involved in the thermodynamics of absorption chillers have so far restricted researchers to creating steady state or dynamic models reliant on data measurements of the internal chiller state, which require difficult-to-obtain, intrusive measurements. The pragmatic, yet fully-dynamic model described in this paper is designed to be easily calibrated using data obtained from the measurements of inflows and outflows to a chiller, without resorting to intrusive measurements. The model comprises a series of linked control volumes featuring both performance maps and lumped mass volumes, which reflect the underlying physical structure of the device. The model was developed for the ESP-r building simulation tool. This paper describes the modelling approach, theory and limitations, along with its calibration and the application of the model to a specific example

Scheduling of Multiple Chillers in Trigeneration Plants

The scheduling of both absorption cycle and vapour compression cycle chillers in trigeneration plants is investigated in this work. Many trigeneration plants use absorption cycle chillers only but there are potential performance advantages to be gained by using a combination of absorption and compression chillers especially in situations where the building electrical demand to be met by the combined heat and power (CHP) plant is variable. Simulation models of both types of chillers are developed together with a simple model of a variable-capacity CHP engine developed by curve-fitting to supplier’s data. The models are linked to form an optimisation problem in which the contribution of both chiller types is determined at a maximum value of operating cost (or carbon emission) saving. Results show that an optimum operating condition arises at moderately high air conditioning demands and moderately low power demand when the air conditioning demand is shared between both chillers, all recovered heat is utilised, and the contribution arising from the compression chiller results in an increase in CHP power generation and, hence, engine efficiency

Comparative techno-economic analysis of ORC and gasification for bioenergy applications

The use of biomass for decentralized energy production has undergone a significant development the last years. The fact that this fuel is CO(2)-free provides many advantages in European and world aims for sustainable energy sources. Biomass trigeneration is a relatively new concept, which has the potential to improve the bioenergy economics for areas with warm climate, for which traditional biomass cogeneration was unfeasible. This concept can be applied with various energy conversion technologies, two of which are investigated in this paper: ORC and gasification. Both technologies are applied for a specific case study. The technological and financial comparison of the two technologies shows that gasification offers improved yield for the investment, mainly due to the higher electrical efficiency factor. However, attention should be placed to the increased investment risk of gasification projects, which could be an aversive factor for some investors. (C) 2008 Elsevier Ltd. All rights reserved

Energy aspects and ventilation of food retail buildings

Worldwide the food system is responsible for 33% of greenhouse gas emissions. It is estimated that by 2050, the total food production should be 70% more than current food production levels. In the UK, food chain is responsible for around 18% of final energy use and 20% of GHG emissions. Estimates indicate that energy savings of the order of 50% are achievable in food chains by appropriate technology changes in food production, processing, packaging, transportation, and consumption. Ventilation and infiltration account for a significant percentage of the energy use in food retail (supermarkets) and catering facilities such as restaurants and drink outlets. In addition, environmental conditions to maintain indoor air quality and comfort for the users with minimum energy use for such buildings are of primary importance for the business owners and designers. In particular, supermarkets and restaurants present design and operational challenges because the heating ventilation and air-conditioning system has some unique and diverse conditions that it must handle. This paper presents current information on energy use in food retail and catering facilities and continues by focusing on the role of ventilation strategies in food retail supermarkets. It presents the results of current studies in the UK where operational low carbon supermarkets are predicted to save 66% of CO2 emissions compared to a base case store. It shows that low energy ventilation strategies ranging from improved envelope air-tightness, natural ventilation components, reduction of specific fan power, ventilative cooling, novel refrigeration systems using CO2 combined with ventilation heat recovery and storage with phase change materials can lead to significant savings with attractive investment return

Distributed multi-generation systems: energy models and analyses

Libro riguardante la caratterizzazione di sistemi per la produzione combinata di energia da sistemi di multi-generazione distribuita (Distributed Multi-Generation, DMG). Il libro tratta componenti, schemi e modelli di sistemi di multi-generazione distribuita, illustra concetti derivanti da proposte originali degli autori in merito all'analisi e alla pianificazione dei sistemi, con i corrispondenti indicatori energetici e ambientali approccio formulati secondo un approccio unificato. Numerosi esempi applicativi inclusi nel libro riguardano in particolare sistemi di cogenerazione e trigenerazion

Energy and thermodynamical study of a small innovative compressed air energy storage system (micro-CAES)

There is a growing interest in the electrical energy storage system, due to the high penetration of the energy produced by renewable sources, the possibility of leveling the absorption peak of the electric network (peak shaving) and the advantage of separating the production phase from the exertion phase (time shift). Compressed air energy storage systems (CAES) are one of the most promising technologies of this field, because they are characterized by a high reliability, low environmental impact and a remarkable energy density. The main disadvantage of big systems is that they depend on geological formations which are necessary to the storage. The micro-CAES system, with a rigid storage vessel, guarantees a high portability of the system and a higher adaptability even with distributed or stand-alone energy productions. This article carries out a thermodynamical and energy analysis of the micro-CAES system, a result of the mathematical model created in a Matlab/Simulink® environment. New ideas will be discussed, as the one concerning the quasi-isothermal compression/expansion, through the exertion of a biphasic mixture, that will increase the total system efficiency and enable a combined production of electric, thermal and refrigeration energies. This is something promising for the development of an experimental devic

Exergetic and Economic Evaluation of a Transcritical Heat-Driven Compression Refrigeration System with CO2 as the Working Fluid under Hot Climatic Conditions

The purpose of this research is to evaluate a transcritical heat-driven compression refrigeration machine with CO2 as the working fluid from thermodynamic and economic viewpoints. Particular attention was paid to air-conditioning applications under hot climatic conditions. The system was simulated by Aspen HYSYS® (AspenTech, Bedford, MA, USA) and optimized by automation based on a genetic algorithm for achieving the highest exergetic efficiency. In the case of producing only refrigeration, the scenario with the ambient temperature of 35 °C and the evaporation temperature of 5 °C showed the best performance with 4.7% exergetic efficiency, while the exergetic efficiency can be improved to 22% by operating the system at the ambient temperature of 45 °C and the evaporation temperature of 5 °C if the available heating capacity within the gas cooler is utilized (cogeneration operation conditions). Besides, an economic analysis based on the total revenue requirement method was given in detail