3D photonic crystals for direct applications in light emitting devices

In this paper, we present IP-Dip polymer-based Photonic Crystals (PhCs), which are more and more attractive for photonic devices. These structures offer simple and cheap solutions, how to improve optical properties of these devices. In our experiment, we used Direct Laser Writing (DLW) lithography to create a three dimensional (3D) PhCs. We fabricated two types of PhC structure. The first structure was prepared from IP-Dip polymer and used for modification of the radiation pattern of the optical fiber. The second PhC structure was filled with liquid polymer PolyDiMethylSiloxane (PDMS) and directly placed on the LED chip. Quality of the prepared structures was confirmed by a confocal microscope. The modification of the far-field radiation patterns of LED and optical fiber was measured by a goniophotometer

LED pumped polymer laser sensor for explosives

The authors would like to acknowledge financial support for this research from the EPSRC HYPIX project (grant number EP/ F059922/1 and EP/F05999X/1), and the TIRAMISU project, funded by the European Commission's Seventh Framework Programme (FP7/2007-2013) under grant agreement n° 284747.A very compact explosive vapor sensor is demonstrated based on a distributed feedback polymer laser pumped by a commercial InGaN light-emitting diode. The laser shows a two-stage turn on of the laser emission, for pulsed drive currents above 15.7 A. The 'double-threshold' phenomenon is attributed to the slow rise of the ∼30 ns duration LED pump pulses. The laser emits a 533 nm pulsed output beam of ∼10 ns duration perpendicular to the polymer film. When exposed to nitroaromatic model explosive vapors at ∼8 ppb concentration, the laser shows a 46% change in the surface-emitted output under optimized LED excitation. A very compact explosive vapor sensor is demonstrated based on a distributed feedback polymer laser pumped by a commercial InGaN light-emitting diode. The laser shows a two-stage turn on of the laser emission, for pulsed drive currents above 15.7 A. The 'double-threshold' phenomenon is attributed to the slow rise of the ∼30 ns duration LED pump pulses. The laser emits a 533 nm pulsed output beam of ∼10 ns duration perpendicular to the polymer film. When exposed to nitroaromatic model explosive vapors at ∼8 ppb concentration, the laser shows a 46% change in the surface-emitted output under optimized LED excitation.Publisher PDFPeer reviewe

Polymer Nanocomposites Using Zinc Aluminum and Magnesium Aluminum Oleate Layered Double Hydroxides: Effects of LDH Divalent Metals on Dispersion, Thermal, Mechanical and Fire Performance in Various Polymers

Oleate-containing layered double hydroxides of zinc aluminum (ZnAl) and magnesium aluminum (MgAl) were used to prepare nanocomposites of polyethylene, poly(ethylene-co-butyl acrylate) and poly(methyl methacrylate). The additives and/or their polymer composites were characterized by X-ray diffraction, FTIR, elemental analysis, thermogravimetric analysis, mechanical testing, and cone calorimetry. The unusual packing of the monounsaturated oleate anions in the gallery of these LDHs facilitates the dispersion of these nanomaterials. The inorganic LDH protects the polymer from thermal oxidation, shown by enhancement of the thermal and fire properties of the corresponding polymer nanocomposites. There is a qualitative difference in the morphology of the two LDHs in PE and PMMA. ZnAl is better dispersed in PE while MgAl is better dispersed in PMMA. The zinc-containing material led to a large reduction in the peak heat release rate in polyethylene, while the magnesium-containing material led to enhancement of the fire properties of the more polar poly(methyl methacrylate). These fire properties are consistent with the morphological differences. Neither of these LDHs shows efficacy with poly(ethylene-co-butyl acrylate), which indicates a selective interaction between the LDH and the various polymers

Thermal Decomposition and Combustion of γ-irradiated Polyamide 6 Containing Phosphorus Oxynitride or Phospham

Polyamide 6 (PA-6) containing the fire retardants phosphorus oxynitride ((PON)m) or phospham ((PN2H)n) was exposed to 60Co-γ-rays (absorbed dose: 1.0–4.0 MGy). The irradiation led to crosslinking of the polymer which caused an increase in the char yield and a decrease in the flammability of the polymer. The combustion behavior was strongly affected by irradiation: dripping was totally prevented in the case of system PA-6/(PN2H)n and strongly retarded in the case of system PA-6/(PON)m. The thermal stability of the system PA-6/(PN2H)n decreased with increasing absorbed dose whereas the thermal stability of the system PA-6/(PON)m did not change

Open windrow composting of polymers: An investigation into the rate of degradation of polyethylene

The compostability of degradable polymers under open windrow composting conditions is explored within this paper. Areas for consideration were the use of, and impacts of, degradable polyethylene (PE) sacks on the composting process and the quality of the finished compost product. These factors were investigated through polymer weight loss over the composting process, the amount of polymer residue and chemical contaminants in the finished compost product, the windrow temperature profiles and a bioassay to establish plant growth and germination levels using the final compost product. This trial also included a comparative study of the weight loss under composting conditions of two different types of ‘degradable’ polymer sacks currently on the European market: PE and a starch based product. Statistical analysis of the windrow temperature profiles has led to the development of a model, which can help to predict the expected trends in the temperature profiles of open compost windrows where the organic waste is kerbside collected using a degradable PE sack

Controlled Release of Vancomycin and Tigecycline from an Orthopaedic Implant Coating Prevents Staphylococcus aureus Infection in an Open Fracture Animal Model.

Introduction:Treatment of open fractures routinely involves multiple surgeries and delayed definitive fracture fixation because of concern for infection. If implants were made less susceptible to infection, a one-stage procedure with intramedullary nailing would be more feasible, which would reduce morbidity and improve outcomes. Methods:In this study, a novel open fracture mouse model was developed using Staphylococcus aureus (S. aureus) and single-stage intramedullary fixation. The model was used to evaluate whether implants coated with a novel "smart" polymer coating containing vancomycin or tigecycline would be colonized by bacteria in an open fracture model infected with S. aureus. In vivo bioluminescence, ex vivo CFUs, and X-ray images were evaluated over a 42-day postoperative period. Results:We found evidence of a markedly decreased bacterial burden with the local release of vancomycin and tigecycline from the PEG-PPS polymer compared to polymer alone. Vancomycin was released in a controlled fashion and maintained local drug concentrations above the minimum inhibition concentration for S. aureus for greater than 7 days postoperatively. Bacteria were reduced 139-fold from implants containing vancomycin and undetected from the bone and soft tissue. Tigecycline coatings led to a 5991-fold reduction in bacteria isolated from bone and soft tissue and 15-fold reduction on the implants compared to polymer alone. Antibiotic coatings also prevented osteomyelitis and implant loosening as observed on X-ray. Conclusion:Vancomycin and tigecycline can be encapsulated in a polymer coating and released over time to maintain therapeutic levels during the perioperative period. Our results suggest that antibiotic coatings can be used to prevent implant infection and osteomyelitis in the setting of open fracture. This novel open fracture mouse model can be used as a powerful in vivo preclinical tool to evaluate and optimize the treatment of open fractures before further studies in humans

New polymers for phase partitioning

The synthesizing of several polyethylene glycols having crown ethers attached is reported. This work led to the identification of three new polymer types which promise to be more effective at selectively binding specific cell types. Work was completed on identification of chemical properties of the new polymer crowns and on development of new techniques for determination of polymer-phase composition

Diffraction Properties and Application of 3D Polymer Woodpile Photonic Crystal Structure

We present a new technique for modification of diffraction and optical properties of photonic devices by surface application of polymer Three-Dimensional (3D) woodpile Photonic Crystal (PhC) structure. Woodpile structure based on IP-Dip polymer was designed and fabricated by Direct Laser Writing (DLW) lithography method based on nonlinear Two-Photon Absorption (TPA). At first, we investigated diffraction properties of woodpile structure with a period of 2 μm. The structure was placed on a glass substrate, and diffraction patterns were measured using laser sources with different wavelengths. After diffraction properties investigation, the fabricated structures were used in optoelectronic devices by their surface application. Our polymer 3D PhC woodpile structures were used for radiation properties modification of light emitting devices - optical fiber and Light Emitting Diode (LED) and for angular photoresponse modification of InGaAsN-based photodiode. The modification of the far-field radiation patterns of optical fiber and LED and spatial modulation of light coupling into photodiode chip with applied structures were measured by goniophotometer. Quality of fabricated structures was analyzed by a Scanning Electron Microscope (SEM)

A non-monotonic constitutive model is not necessary to obtain shear banding phenomena in entangled polymer solutions

In 1975 Doi and Edwards predicted that entangled polymer melts and solutions can have a constitutive instability, signified by a decreasing stress for shear rates greater than the inverse of the reptation time. Experiments did not support this, and more sophisticated theories incorporated Marrucci's idea (1996) of removing constraints by advection; this produced a monotonically increasing stress and thus stable constitutive behavior. Recent experiments have suggested that entangled polymer solutions may possess a constitutive instability after all, and have led some workers to question the validity of existing constitutive models. In this Letter we use a simple modern constitutive model for entangled polymers, the non-stretching Rolie-Poly model with an added solvent viscosity, and show that (1) instability and shear banding is captured within this simple class of models; (2) shear banding phenomena is observable for weakly stable fluids in flow geometries that impose a sufficiently inhomogeneous total shear stress; (3) transient phenomena can possess inhomogeneities that resemble shear banding, even for weakly stable fluids. Many of these results are model-independent.Comment: 5 figure

Experimental Demonstration of Staggered CAP Modulation for Low Bandwidth Red-Emitting Polymer-LED based Visible Light Communications

In this paper we experimentally demonstrate, for the first time, staggered carrier-less amplitude and phase (sCAP) modulation for visible light communication systems based on polymer light-emitting diodes emitting at ~639 nm. The key advantage offered by sCAP in comparison to conventional multiband CAP is its full use of the available spectrum. In this work, we compare sCAP, which utilises four orthogonal filters to generate the signal, with a conventional 4-band multi-CAP system and on-off keying (OOK). We transmit each modulation format with equal energy and present a record un-coded transmission speed of ~6 Mb/s. This represents gains of 25% and 65% over the achievable rate using 4-CAP and OOK, respectively.Comment: 6 pages, 9 figures, IEEE ICC 2019 conferenc