Ultra Wideband Impulse Radio Systems with Multiple Pulse Types

In an ultra wideband (UWB) impulse radio (IR) system, a number of pulses, each transmitted in an interval called a "frame", is employed to represent one information symbol. Conventionally, a single type of UWB pulse is used in all frames of all users. In this paper, IR systems with multiple types of UWB pulses are considered, where different types of pulses can be used in different frames by different users. Both stored-reference (SR) and transmitted-reference (TR) systems are considered. First, the spectral properties of a multi-pulse IR system with polarity randomization is investigated. It is shown that the average power spectral density is the average of the spectral contents of different pulse shapes. Then, approximate closed-form expressions for the bit error probability of a multi-pulse SR-IR system are derived for RAKE receivers in asynchronous multiuser environments. The effects of both inter-frame interference (IFI) and multiple-access interference (MAI) are analyzed. The theoretical and simulation results indicate that SR-IR systems that are more robust against IFI and MAI than a "conventional" SR-IR system can be designed with multiple types of ultra-wideband pulses. Finally, extensions to multi-pulse TR-IR systems are briefly described.Comment: To appear in the IEEE Journal on Selected Areas in Communications - Special Issue on Ultrawideband Wireless Communications: Theory and Application

Synchronization in UWB systems

This thesis is focused on one of the most interesting subjects of research for UWB technology: the synchronization. A synchronization algorithm is proposed, claimed able to solve the presence of Inter Frame Interference (IFI). After that, an algorithm to detect the presence of the signal is proposed. Everything is done in a simple way to keep the receiver complexity very low. The work was developed in the group Circuits and Systems, faculty of Electrical Engineering, Mathematics and Computer Science, at TU-Delft, since 16 of August till 15 February , under the supervision of Prof. dr. ir. Alle Jan van der Veen and the collaboration of Yiyin Wang, PhD student in the same group

Performance Evaluation of Impulse Radio UWB Systems with Pulse-Based Polarity Randomization

In this paper, the performance of a binary phase shift keyed random time-hopping impulse radio system with pulse-based polarity randomization is analyzed. Transmission over frequency-selective channels is considered and the effects of inter-frame interference and multiple access interference on the performance of a generic Rake receiver are investigated for both synchronous and asynchronous systems. Closed form (approximate) expressions for the probability of error that are valid for various Rake combining schemes are derived. The asynchronous system is modelled as a chip-synchronous system with uniformly distributed timing jitter for the transmitted pulses of interfering users. This model allows the analytical technique developed for the synchronous case to be extended to the asynchronous case. An approximate closed-form expression for the probability of bit error, expressed in terms of the autocorrelation function of the transmitted pulse, is derived for the asynchronous case. Then, transmission over an additive white Gaussian noise channel is studied as a special case, and the effects of multiple-access interference is investigated for both synchronous and asynchronous systems. The analysis shows that the chip-synchronous assumption can result in over-estimating the error probability, and the degree of over-estimation mainly depends on the autocorrelation function of the ultra-wideband pulse and the signal-to-interference-plus-noise-ratio of the system. Simulations studies support the approximate analysis.Comment: To appear in the IEEE Transactions on Signal Processin

The Trade-off between Processing Gains of an Impulse Radio UWB System in the Presence of Timing Jitter

In time hopping impulse radio, $N_f$ pulses of duration $T_c$ are transmitted for each information symbol. This gives rise to two types of processing gain: (i) pulse combining gain, which is a factor $N_f$, and (ii) pulse spreading gain, which is $N_c=T_f/T_c$, where $T_f$ is the mean interval between two subsequent pulses. This paper investigates the trade-off between these two types of processing gain in the presence of timing jitter. First, an additive white Gaussian noise (AWGN) channel is considered and approximate closed form expressions for bit error probability are derived for impulse radio systems with and without pulse-based polarity randomization. Both symbol-synchronous and chip-synchronous scenarios are considered. The effects of multiple-access interference and timing jitter on the selection of optimal system parameters are explained through theoretical analysis. Finally, a multipath scenario is considered and the trade-off between processing gains of a synchronous impulse radio system with pulse-based polarity randomization is analyzed. The effects of the timing jitter, multiple-access interference and inter-frame interference are investigated. Simulation studies support the theoretical results.Comment: To appear in the IEEE Transactions on Communication

Impulse Radio Systems with Multiple Types of Ultra-Wideband Pulses

Spectral properties and performance of multi-pulse impulse radio ultra-wideband systems with pulse-based polarity randomization are analyzed. Instead of a single type of pulse transmitted in each frame, multiple types of pulses are considered, which is shown to reduce the effects of multiple-access interference. First, the spectral properties of a multi-pulse impulse radio system is investigated. It is shown that the power spectral density is the average of spectral contents of different pulse shapes. Then, approximate closed-form expressions for bit error probability of a multi-pulse impulse radio system are derived for RAKE receivers in asynchronous multiuser environments. The theoretical and simulation results indicate that impulse radio systems that are more robust against multiple-access interference than a "classical" impulse radio system can be designed with multiple types of ultra-wideband pulses.Comment: To be presented at the 2005 Conference on Information Sciences and System

A Genetic Algorithm Based Finger Selection Scheme for UWB MMSE Rake Receivers

Due to a large number of multipath components in a typical ultra wideband (UWB) system, selective Rake (SRake) receivers, which combine energy from a subset of multipath components, are commonly employed. In order to optimize system performance, an optimal selection of multipath components to be employed at fingers of an SRake receiver needs to be considered. In this paper, this finger selection problem is investigated for a minimum mean square error (MMSE) UWB SRake receiver. Since the optimal solution is NP hard, a genetic algorithm (GA) based iterative scheme is proposed, which can achieve near-optimal performance after a reasonable number of iterations. Simulation results are presented to compare the performance of the proposed finger selection algorithm with those of the conventional and optimal schemes.Comment: To appear in the Proc. IEEE International Conference on Ultrawideband (ICU-2005

An Enhanced Feedback Scheme for Extended Orthogonal Space-Frequency Block Coded MISO-OFDM Systems

A simple extended orthogonal space-frequency coded multiple input single output (MISO) orthogonal frequency division multiplexing (OFDM) transmitter diversity technique for wireless communications over frequency selective fading channels is presented. The proposed technique utilizes OFDM to transform frequency selective fading channels into multiple flat fading sub-channels on which space-frequency coding is applied. A four-branch transmitter diversity system is implemented without bandwidth expansion and with only one receive antenna. The associated simulations verify that the four-branch transmitter diversity scheme achieves a significant improvement in average bit-error rate (BER) performance. The proposed scheme also outperforms the previously reported scheme due to Yu et. al. with only single phase feedback, and that improvement is retained with quantized feedback. Since the angle feedback is on a per tone basis, the feedback information would be too large for any practical OFDM system. However, we adopt a method which exploits the correlation among the feedback terms for the subcarriers, i.e. a group based quantization technique to reduce the feedback overhead significantly, rendering this scheme attractive to broadband wireless access systems

Optimal and Suboptimal Finger Selection Algorithms for MMSE Rake Receivers in Impulse Radio Ultra-Wideband Systems

Convex relaxations of the optimal finger selection algorithm are proposed for a minimum mean square error (MMSE) Rake receiver in an impulse radio ultra-wideband system. First, the optimal finger selection problem is formulated as an integer programming problem with a non-convex objective function. Then, the objective function is approximated by a convex function and the integer programming problem is solved by means of constraint relaxation techniques. The proposed algorithms are suboptimal due to the approximate objective function and the constraint relaxation steps. However, they can be used in conjunction with the conventional finger selection algorithm, which is suboptimal on its own since it ignores the correlation between multipath components, to obtain performances reasonably close to that of the optimal scheme that cannot be implemented in practice due to its complexity. The proposed algorithms leverage convexity of the optimization problem formulations, which is the watershed between `easy' and `difficult' optimization problems.Comment: To appear in IEEE Wireless Communications and Networking Conference (WCNC 2005), New Orleans, LA, March 13-17, 200

Iterative multiuser detection for ultra-wideband systems

Master'sMASTER OF ENGINEERIN