Age- and Sex-Related Changes in Fasting Plasma Glucose and Lipoprotein in Cynomolgus Monkeys

Background: The age-related dysfunction of glucose and lipid metabolism has a long-standing relationship with cardiovascular and neurodegenerative disease. However, the effects of metabolic dysfunction on men and women are different. Reasons for these sex differences remains unclear. Cynomolgus monkeys have been used, in the past, for the study of human metabolic diseases due to their biologically proximity to humans. Nevertheless, few studies to date have focused on both age- and sex-related differences in glucose and lipid metabolism. The present study was designed to specifically address these questions by using a large cohort of cynomolgus monkeys (N = 1,399) including 433 males and 966 females with ages ranging 4 to 24 years old. Methods: Fasting plasma glucose (FPG) and lipid parameters including total cholesterol (T-Cho), triglyceride (TG), high-density lipoprotein cholesterol (HDL-C) and low-density lipoprotein cholesterol (LDL-C) were measured. All these parameters were compared between ages and sexes. Results: Among the entire cohort, age was strongly correlated with levels of FPG, TG and HDL. Consequently, sex-related analysis revealed that females had significantly higher average levels of FPG, T-Cho, TG, HDL-C and LDL-C than their male counterparts. In addition, more female (28.5 %) than male (16 %) monkeys qualified for impaired fasting plasma glucose (IFPG). In those IFPG animals, sex-related differences were also detected i.e. females had significantly increased levels of T-Cho, TG and LDL-C. Conclusions: The result, for the first time, demonstrated the similarities and differences in detail between male and female cynomolgus monkeys in relationship to age-related glucose and lipoprotein metabolisms, and differences under various physiological conditions. The detailed glucose and lipoprotein profiling should provide additional and important insights for prediabetic conditions. Cynomolgus monkeys appear to be an excellent model for translational research of diabetes and for novel therapeutic strategies testing to overt diabetes

Comparative study of surface integral methods in aeroacoustic prediction

Introduction: Surface integral methods based on the acoustic analogy and Kirchhoff formulation are widely employed in computational aeroacoustics. The computational accuracy is usually highly dependent on the selections of the acoustic prediction method and of the integral surfaces.Methods: This paper analyzes the pros and cons of each aeroacoustic prediction method and studies numerically sound generated from flow past a circular cylinder by employing different surface integral methods. The acoustic analogy based on the impermeable solid surfaces either ignores the quadrupole contribution or needs high computational cost to calculate the quadrupole contribution, and the acoustic analogy based on the permeable integral surfaces usually suffers from the spurious source issue.Results: Both the pressure-based or density-based Kirchhoff formulations can be used in aeroacoustic prediction, however, the numerical results indicate that the pressure-based Kirchhoff formulation also suffers from the issue of the spurious sound because the pressure fluctuations at the permeable integral surfaces are contaminated by hydrodynamic component.Discussion: It seems that only the density-based Kirchhoff formulation does not suffer from the issue of the spurious sound, but this formulation requires the acoustic sources should be extracted from compressible flow simulations

Estimated plasma volume status as a simple and accessible predictor of 28-day mortality in septic shock: insights from a retrospective study of the MIMIC-IV database

BackgroundAssessing volume status in septic shock patients is crucial for tailored fluid resuscitation. Estimated plasma volume status (ePVS) has emerged as a simple and effective tool for evaluating patient volume status. However, the prognostic value of ePVS in septic shock patients remains underexplored.MethodsThe study cohort consisted of septic shock patients admitted to the ICU, sourced from the MIMIC-IV database. Patients were categorized into two groups based on 28-day survival outcomes, and their baseline characteristics were compared. According to the ePVS (6.52 dL/g) with a hazard ratio of 1 in the restricted cubic spline (RCS) analysis, patients were further divided into high and low ePVS groups. A multivariable Cox regression model was utilized to evaluate the association between ePVS and 28-day mortality rate. The Kaplan–Meier survival curve was plotted, and all-cause mortality was compared between the high and low groups using the log-rank test.ResultsA total of 7,607 septic shock patients were included in the study, among whom 2,144 (28.2%) died within 28 days. A J-shaped relationship was observed between ePVS at ICU admission and 28-day mortality, with an increase in mortality risk noted when ePVS exceeded 6.52 dL/g. The high ePVS group exhibited notably higher mortality rates compared to the low ePVS group (28-day mortality: 26.2% vs. 30.2%; 90-day mortality: 35% vs. 42.3%). After adjustment for confounding factors, ePVS greater than 6.52 dL/g independently correlated with an increased risk of 28-day mortality (HR: 1.20, 95% CI: 1.10–1.31, p < 0.001) and 90-day mortality (HR: 1.25, 95% CI: 1.15–1.35, p < 0.001). Kaplan–Meier curves demonstrated a heightened risk of mortality associated with ePVS values exceeding 6.52 dL/g.ConclusionA J-shaped association was observed between ePVS and 28-day mortality in septic shock patients, with higher ePVS levels associated with increased risk of mortality

Te-based chalcogenide films with high thermal stability for phase change memory

This study reports on the synthesis of tellurium-based chalcogenide films that have high thermal stability for phase change memory application. Several Te-based chalcogenide alloys of In-Bi-Te, Ag-Bi-Te, In-Sb-Te, Sn-Sb-Te, Zn-Ge-Te, and Ga-Ge-Te are reported. Their thermal, optical, and electrical properties are investigated. The results show that Bi-Te-based films have a higher crystallization temperature and greater activation energy compared with the other Sb-Te-based and Ge-Te-based films. Especially, In₂.₈Bi₃₆.₆Te₆₀.₆film exhibits high crystallization temperature (252 °C) and great activation energy (5.16 eV), showing much improved amorphous thermal stability. A relatively wider optical band gap (0.674 eV) of thermal annealed In₂.₈Bi₃₆.₆Te₆₀.₆film is obtained. In addition, it also has a higher amorphous/crystalline resistance ratio of about 10⁵, implying that current consumption could be low in the phase-change memory operation.This work was financially supported by the Natural Science Foundation of China (Grant Nos. 61008041, 61107047, and 60978058), the Natural Science Foundation of Zhejiang Province, China (Grant No. Y1090996), the Natural Science Foundation of Ningbo City, China (Grant No. 2011A610092), the Ningbo optoelectronic materials and devices creative team (Grant No. 2009B21007), the Open Research Fund of State Key Laboratory of Transient Optics and Photonics, Chinese Academy of Sciences (Grant No. SKLST201010), and sponsored by K. C. Wong Magna Fund in Ningbo University

Controllable Formation of the Crystalline Phases in Ge-Ga-S Chalcogenide Glass-Ceramics

We prepared chemically stoichiometric, S-poor and S-rich Ge–Ga–S glasses and annealed them at a temperature that was 20°C higher than its respective glass transition temperature. We aimed at tuning the formation of the different crystals in chalcogenide glass-ceramics. Through systematic characterization of the structure using X-ray diffraction and Raman scattering spectra, we found that, GeS2 and GeS crystals only can be created in S-rich and S-poor glass-ceramics, respectively, while all GeS, Ga2S3, and GeS2 crystals exist in chemically stoichiometric glass-ceramics. Moreover, we demonstrated the homogeneous distribution of the crystals can be formed in the S-rich glass-ceramics from the surface to the interior via composition designing. The present approach blazes a new path to control the growth of the different crystals in chalcogenide glass-ceramicsThis research was supported by the Zhejiang Administration of foreign experts affairs project of China (Z20150650), and the Australian Research Council (ARC) Centre of Excellence for Ultrahigh bandwidth Device for Optical System (CE110001018), ARC Discovery programs (DP110102753

High-resolution chalcogenide fiber bundles for infrared imaging

An ordered chalcogenide fiber bundle with a high resolution for infrared imaging was fabricated using a stack-and-draw approach. The fiber bundle consisted of about 810,000 single fibers with an As2S3 glass core of 9 μm in diameter and a polyetherimide (PEI) polymer cladding of 10 μm in diameter. The As2S3 fibers showed good transparency in the 1.5–6.5 μm spectral region. It presented a resolution of ~45 lp/mm and a crosstalk of ~2.5%. Fine thermal images of a hot soldering iron tip were delivered through the fiber bundle

A retrospective and agenda for future research on Chinese outward foreign direct investment

Our original paper “The determinants of Chinese Outward Foreign Direct Investment” was the first theoretically based empirical analysis of the phenomenon. It utilised internalisation theory to show that Chinese state-owned firms reacted to home country market imperfections to surmount barriers to foreign entry arising from naivety and the lack of obvious ownership advantages, leveraging institutional factors including favourable policy stimuli. This special theory explained outward foreign direct investment (OFDI) but provided surprises. These included the apparent appetite for risk evinced by these early investors, causing us to conjecture that domestic market imperfections, particularly in the domestic capital market, might be responsible. The article stimulated a massive subsequent, largely successful, research effort on emerging country multinationals. In this Retrospective article we review some of the main strands of research that ensued, for the insight they offer for the theme of our commentary. Our theme is that theoretical development can only come through embracing yet more challenging, different, and new contexts, and we make suggestions for future research directions