Consumption of vitamin a rich foods and dark adaptation threshold of pregnant women at Damot Sore District, Wolayita, southern Ethiopia

BACKGROUND: More than 7.2 million pregnant women in developing countries suffer from vitamin A deficiency. The objective of this study was to assess dark adaptation threshold of pregnant women and related socio-demographic factors in Damot Sore District, Wolayita Zone, Southern Ethiopia.METHODS: A cross-sectional study design was employed to collect data from 104 pregnant women selected by a two stage cluster sampling. A Dietary Diversity Score was calculated by counting the number of food groups consumed by the women in 24 hour period prior to the study. Scotopic Sensitivity Tester-1 was used to test participant’s pupillary response to graded amounts of light in a dark tent. RESULTS: Half of the pregnant women in this study had dietary diversity score less than three. The majority of participants (87.5%) had consumed either animal or plant source vitamin A rich foods less than three times a week. For a unit increase in individual dietary diversity score, there was a decrease in dark adaptation measurement by 0.29 log cd/m2 (p=0.001). For a unit increase in gestational week of pregnancy, there was an increase in dark adaptation measurement by 0.19 log cd/m2 (P=0.027). CONCLUSIONS: Results from this study indicated that the pregnant women had low consumption of vitamin A rich foods, and their dark adaptation threshold increases with gestational age indicating that their vitamin A status is getting worse. There is a need to design appropriate intervention and target this group of population.KEYWORDS: Vitamin A deficiency, pregnant women, dark adaptation threshold, Southern Ethiopi

The Impact of Soil and Water Conservation Program on the Income and Productivity of Farm Households in Adama District, Ethiopia

Land degradation due to soil erosion and nutrient depletion is one of the main problems constraining the development of the agricultural sector in Ethiopia. As part of intervention activities a number of soil and water conservation (SWC) practices have been promoted to smallholder farmers living in highly degraded and drought prone areas of the country. This study was conducted to assess the impact of SWC intervention on the livelihood of smallholder farm households in terms household income and productivity. To meet this objective primary data was gathered in 2012 from 101 SWC program participants and 115 non-participants that were randomly selected from 3 intervention area and 3 counterfactual villages respectively. Descriptive and inferential statistics and propensity score matching (PSM) models were used to address the stated objectives. Results of the descriptive statistics showed that before matching there was statistically significant difference between program participants and their counterfactual households in terms of sex and age of household head, family size and farm size generally in favor of program participants. Results of the PSM model revealed that SWC intervention did not result in significant difference between program participant and nonparticipant households in terms of total crop and household income, and crop yield. However it was to be noted that there were positive trends which all together should guide SWC policy makers to identify important factors influencing the contribution of such a program and reconsider the design and implementation of the interventionsKeywords: Soil and water, Conservation practices, Impact, Oromia regio

Analytical Evaluation on Hysteresis Performance of Circular Shear Panel Damper

The idea of adding metallic energy dissipaters to a structure to absorb a large part of the seismic energy began four decades ago. There are several types of metal-based devices conceived as dampers for the seismic energy absorber whereby damages to the major structural components could be minimized for both new and existing structures. This paper aimed to develop and evaluate structural performance of both stiffened and non stiffened circular shear panel damper for passive seismic energy protection by inelastic deformation. Structural evaluation was done using commercially available nonlinear FE simulation program. Diameter-to-thickness ratio is employed as main parameter to investigate the hysteresis performance of stiffened and unstiffened circular shear panel. Depending on these parameters three different buckling mode and hysteretic behavior was found: yielding prior to buckling without strength degradation, yielding prior to buckling with strength degradation and yielding with buckling and strength degradation which forms pinching at initial displacement. Hence, the hysteresis behavior is identified, specimens which deform without strength degradation so it will be used as passive energy dissipating device in civil engineering structures

Analytical Evaluation on Hysteresis Performance of Circular Shear Panel Damper

The idea of adding metallic energy dissipaters to a structure to absorb a large part of the seismic energy began four decades ago. There are several types of metal-based devices conceived as dampers for the seismic energy absorber whereby damages to the major structural components could be minimized for both new and existing structures. This paper aimed to develop and evaluate structural performance of both stiffened and non stiffened circular shear panel damper for passive seismic energy protection by inelastic deformation. Structural evaluation was done using commercially available nonlinear FE simulation program. Diameter-to-thickness ratio is employed as main parameter to investigate the hysteresis performance of stiffened and unstiffened circular shear panel. Depending on these parameters three different buckling mode and hysteretic behavior was found: yielding prior to buckling without strength degradation, yielding prior to buckling with strength degradation and yielding with buckling and strength degradation which forms pinching at initial displacement. Hence, the hysteresis behavior is identified, specimens which deform without strength degradation so it will be used as passive energy dissipating device in civil engineering structures

Analytical Evaluation on Hysteresis Performance of Circular Shear Panel Damper

The idea of adding metallic energy dissipaters to a structure to absorb a large part of the seismic energy began four decades ago. There are several types of metal-based devices conceived as dampers for the seismic energy absorber whereby damages to the major structural components could be minimized for both new and existing structures. This paper aimed to develop and evaluate structural performance of both stiffened and non stiffened circular shear panel damper for passive seismic energy protection by inelastic deformation. Structural evaluation was done using commercially available nonlinear FE simulation program. Diameter-to-thickness ratio is employed as main parameter to investigate the hysteresis performance of stiffened and unstiffened circular shear panel. Depending on these parameters three different buckling mode and hysteretic behavior was found: yielding prior to buckling without strength degradation, yielding prior to buckling with strength degradation and yielding with buckling and strength degradation which forms pinching at initial displacement. Hence, the hysteresis behavior is identified, specimens which deform without strength degradation so it will be used as passive energy dissipating device in civil engineering structures

Analytical Evaluation on Hysteresis Performance of Circular Shear Panel Damper

The idea of adding metallic energy dissipaters to a structure to absorb a large part of the seismic energy began four decades ago. There are several types of metal-based devices conceived as dampers for the seismic energy absorber whereby damages to the major structural components could be minimized for both new and existing structures. This paper aimed to develop and evaluate structural performance of both stiffened and non stiffened circular shear panel damper for passive seismic energy protection by inelastic deformation. Structural evaluation was done using commercially available nonlinear FE simulation program. Diameter-to-thickness ratio is employed as main parameter to investigate the hysteresis performance of stiffened and unstiffened circular shear panel. Depending on these parameters three different buckling mode and hysteretic behavior was found: yielding prior to buckling without strength degradation, yielding prior to buckling with strength degradation and yielding with buckling and strength degradation which forms pinching at initial displacement. Hence, the hysteresis behavior is identified, specimens which deform without strength degradation so it will be used as passive energy dissipating device in civil engineering structures

Radiological Features and Postoperative Histopathologic Diagnosis of Intracranial Masses at Tikur Anbessa Specialized Hospital and MCM Hospital

Background: Intracranial mass lesions are common causes of neurological morbidity and are detectable by cranial imaging. Given the wide range of pathological processes that can present as intracranial mass lesions, the radiologist can limit the differential diagnosis to inform clinical decision-making. The main objective of this review was to analyze radiologicfeatures and postoperative histopathology diagnosis of intracranial mass lesions.Methods: A cross sectional study was conducted on 96 patients who underwent surgery for intracranial mass lesions at Tikur Anbessa Specialized Hospital (TASH) and Myungsung Christian Medical Center (MCM) in a period of 3 years (Feb 2009-Dec 2011). Patients werelimited to those who had histopathologic result and either CT (n=67), MRI (n=14) scan report or both (n=15).Results: Histopathologically confirmed intracranial masses constituted meningioma = 32 (39%), glioma =15 (18.3%), pituitary adenoma = 14 (17%), and tuberculoma = 6 (7.3%).The CT scan sensitivity, specificity, and accuracy in differentiating meningiomas from other intracranial masses, taking the first differential as most likely diagnosis, was 80%, 95% and 88.6% whereas for gliomas it was 71%, 85.7% and 83% respectively. The higher rate of meningiomas found in this study may result from surgeons bias toward preference of resection of extra axial tumors or longer survival of meningioma patients.Conclusion: Meningiomas were the commonest histologically diagnosed intracranial mass lesions followed by glioma, but their prevalence may have been overestimated in this study because surgeons are more likely to resect them and confirm their diagnosis. Tuberculoma was the commonest non-tumor lesion. CT scan was more accurate, sensitive and specific in diagnosing benign than malignant masses

Bacterial Profile and Antimicrobial Susceptibility Pattern of Isolates Among Burn Patients at Yekatit 12 Hospital Burn Center, Addis Ababa, Ethiopia

Background: Infection is a common cause of morbidity and mortality in burn patients. Clinical diagnosis of bacteremia and/or sepsis in burn patients is difficult for a number of reasons. It could be symptomatic and/or asymptomatic as a result of immune deficiency secondary to thermal injury.Methods: A cross sectional study was conducted at Yekatit 12 Hospital Burn Center. Blood specimen and wound swab were collected from burn patients and were cultured by conventional method. Sensitivity/susceptibility pattern of the isolates was determined by disc diffusion method. Some of the risk factors of bacteremia like prior antibiotic use and total body surface area burn were also determined.Results: Fifty patients were enrolled in the study of whom 21(42%) were found bacteremic. Five different bacteria were isolated from blood specimen. Coagulase negative Staphylococci, 9(42.8%), S. aureus, 8(38.2%), Bacillus spps, 2(9.52%), K. pneumoniae, 1(4.8%), and P. aeruginosa, 1(4.8%), were frequent isolates. From wound swab, S. aureus, (34.04%), and P. aeruginosa, (31.8%), were predominant. Antimicrobial resistance was observed for Ampicillin, (77.4%), Doxycycline, (74.0), Nalidixic acid, (70.5%), Penicillin G, (68.2%), and tetracycline, (67.5%). Total body surface area of burn ≥ 15% was found as a risk factor for bacteremia.Conclusion: Bacteremia was detected at a rate of 42% among burn patients. Frequent isolates were S. aureus, (34.04%), and P. aeruginosa, (31.8%). About 82.16% of the isolates showed multiple resistances. In light of our findings, regular antibiotic resistance test has to be done for each patient in order to select an appropriate antimicrobial agent.Keywords: Bacteraemia, Burn, Sepsis, Thermal injur

Bacteriological profile of burn patients at Yekatit 12 Hospital Burn Center, Ethiopia: A longitudinal study

Introduction: Burn is one of the most common devastating and a very painful form of trauma. Significant thermal injuries induce a state of immune-suppression that predisposes burn patients to infection complications.Materials and methods: A prospective hospital based study was carried out from December 2010 to February 2011 at Yekatit 12 hospital burn center. Periodic wound swabs and blood samples were collected on 1st, 7th, and 14th days of hospital stay and processed with conventional culture and biochemical tests. Isolates were tested against commonly used antibiotics by Modified Kirby-Bauer disc diffusion methods. Data were analyzed by SPSS version 17.0 for Windows.Results: From the total of 104 pus cultures, 101 isolates were identified. At the 1st day of pus culture the dominant isolate was Staphylococcus aureus 15(46.9%). On the 7th day of pus culture S. aureus 21 (46.1%) and Pseudomonas spp 20 (44.4%) were isolated. Similarly, at the 14th day the most frequent isolates were S. aureus 12 (50%) and Pseudomonas spp11 (45.8 %). There was no significant change on time regarding blood culture isolates. Of 92 blood cultures, 15 gram positive isolates were identified the majority being coagulase negative staphylococci (CoNS), 8 (53.3%). Gram negative isolates, mainly Pseudomonas spp were found resistant for most of antibiotics used in the hospital.Conclusions: The nature of periodic microbial wound colonization, flora changes and their antibiotic susceptibility pattern should be taken into consideration in empirical antimicrobial treatment of burned patients

The Ethiopian dairy sector with focus on traditional butter: A review

Ethiopia is believed to have the largest cattle population in Africa. The total annual milk production from cattle has been estimated at 3.5 billion liters from 11.38 million dairy cows. As a result, cow’s milk is the focus of milk processing in Ethiopia. In Ethiopia, the base of milk processing is fermented milk (Ergo) with no defined starter cultures used to initiate fermentation. The main reasons reported for the use of fermented milk as a base of processing are the small volume of milk produced per day, better shelflife of fermented milk, consumer preference and type of available milk processing materials. The success of dairy development to a large extent depends on market for the product combined with other dairy infrastructure and availability of small-scale processing facilities to manufacture high quality dairy products. In Ethiopia, only 6.6 % of the total milk produced in the country is marketed as liquid milk and the remaining 48.8 % and 44.6 % of produced milk is used for home consumption and processing, respectively. Out of the 44.6 % of milk allocated for household processing, 75 % and 25 % go to butter and Ethiopian cottage cheese production, respectively. Thus, the products could be easily transported to market place, and fetch better prices or returns. The microbiological information on traditional butter is not fully available in Ethiopia. However, the available previous research works conducted in Ethiopia revealed that the microbial count of butter is generally above the acceptable limits set for quality butter. The presence of bacteria in butter reduces the keeping quality of the product and certain bacteria with their associated enzymes and toxins may even survive high temperature and create public health hazards. The potential sources of butter microbial contamination are raw materials, air, water and equipment, which usually occur during processing, packaging and storage of finished product. Therefore, all precautions should be taken to avoid contamination of butter and public health hazards.&nbsp