A 110/230 V AC and 15-400 V DC 0.3 W Power-Supply IC With Integrated Active Zero-Crossing Buffer

This work presents an offline power supply with fully integrated power stage in 0.18 μ m high-voltage (HV) CMOS silicon on insulator (SOI). It supports both ac-dc and dc-dc conversion from 15-400 V input down to 3.3-10 V output and is optimized for applications below 300 mW such as the Internet of Things (IoT), smart home, and e-mobility. An active zero-crossing buffer enables on-chip integration of the HV buffer capacitor. Below 150 V, constant ON-time control is based on voltage intervals, sensed by ten HV threshold-detection circuits. Above 150 V, the converter operates in the resonant mode. It achieves a superior power density of 458 mW/cm3 and 84% peak efficiency

A Resonant One-Step 325 v to 3.3-10 v DC-DC Converter with Integrated Power Stage Benefiting from High-Voltage Loss-Reduction Techniques

This work presents a self-timed resonant high-voltage (HV) dc-dc converter in HV CMOS silicon-on-insulator (SOI) with a one-step conversion from 100-325 V input down to a 3.3-10 V output, optimized for applications below 500 mW, such as IoT, smart home, and e-mobility. Unlike bulky power modules, the HV converter is fully integrated, including an on-chip power stage, with only one external inductor (10 $\mu \text{H}$ ) and capacitor (470 nF). It reaches a high power density of 752 mW/cm3, an overall peak efficiency as high as 81%, and a light-load efficiency of 73.2% at 5 V and 50 mW output. HV loss-reduction techniques are presented and experimentally confirmed to offer an efficiency improvement of more than 32%. Integrated HV insulated gate bipolar transistors (IGBTs) are discussed and implemented as an attractive alternative to conventional integrated HV power switches, resulting in 20% smaller area at lower losses

A current-mode buck-boost DC-DC converter with fast transient response

A fast transient current-mode buckboost DC-DC converter for portable devices is presented. Running at 1 MHz the converter provides stable 3 V from a 2.7 V to 4.2 V Li-Ion battery. A small voltage under-/overshoot is achieved by fast transient techniques: (1) adaptive pulse skipping (APS) and (2) adaptive compensation capacitance (ACC). The proposed converter was implemented in a 0.25 μm CMOS technology. Load transient simulations confirm the effectiveness of APS and ACC. The improvement in voltage undershoot and response time at light-to-heavy load step (100 mA to 500 mA), are 17 % and 59 %, respectively, in boost mode and 40 % and 49 %, respectively, in buck mode. Similar results are achieved at heavy-to-light load step for overshoot and response time

Monolithically Integrated GaN Gate Drivers- A Design Guide

In recent years, an increasing trend towards GaN integration can be observed, enabled by the lateral structure of the GaN technology. A key improvement over a discrete implementation is the integration of a monolithic gate driver. This tutorial-style article aims to give insight into the design flow. It starts with the possibilities of GaN technologies in terms of IC design followed by basic driving principles of GaN HEMTs. Gate loop requirements and recommendations for the gate driver output stage are explained. A flowchart for the design of integrated gate drivers is presented with the boundary constraints from the technology, topology research, and selection using a step-by-step guide. The design flow is run through with an example scenario and the realized gate driver design is optimized for low power consumption and fast switching, which is verified with simulations and measurements. Thus, a guide is given for the design of a monolithically integrated GaN gate driver to further advance, promote, and accelerate integration in GaN

Les droits disciplinaires des fonctions publiques : « unification », « harmonisation » ou « distanciation ». A propos de la loi du 26 avril 2016 relative à la déontologie et aux droits et obligations des fonctionnaires

The production of tt‾ , W+bb‾ and W+cc‾ is studied in the forward region of proton–proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98±0.02 fb−1 . The W bosons are reconstructed in the decays W→ℓν , where ℓ denotes muon or electron, while the b and c quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions.The production of $t\overline{t}$, $W+b\overline{b}$ and $W+c\overline{c}$ is studied in the forward region of proton-proton collisions collected at a centre-of-mass energy of 8 TeV by the LHCb experiment, corresponding to an integrated luminosity of 1.98 $\pm$ 0.02 \mbox{fb}^{-1}. The $W$ bosons are reconstructed in the decays $W\rightarrow\ell\nu$, where $\ell$ denotes muon or electron, while the $b$ and $c$ quarks are reconstructed as jets. All measured cross-sections are in agreement with next-to-leading-order Standard Model predictions

Physics case for an LHCb Upgrade II - Opportunities in flavour physics, and beyond, in the HL-LHC era

The LHCb Upgrade II will fully exploit the flavour-physics opportunities of the HL-LHC, and study additional physics topics that take advantage of the forward acceptance of the LHCb spectrometer. The LHCb Upgrade I will begin operation in 2020. Consolidation will occur, and modest enhancements of the Upgrade I detector will be installed, in Long Shutdown 3 of the LHC (2025) and these are discussed here. The main Upgrade II detector will be installed in long shutdown 4 of the LHC (2030) and will build on the strengths of the current LHCb experiment and the Upgrade I. It will operate at a luminosity up to 2×1034 cm−2s−1, ten times that of the Upgrade I detector. New detector components will improve the intrinsic performance of the experiment in certain key areas. An Expression Of Interest proposing Upgrade II was submitted in February 2017. The physics case for the Upgrade II is presented here in more depth. CP-violating phases will be measured with precisions unattainable at any other envisaged facility. The experiment will probe b → sl+l−and b → dl+l− transitions in both muon and electron decays in modes not accessible at Upgrade I. Minimal flavour violation will be tested with a precision measurement of the ratio of B(B0 → μ+μ−)/B(Bs → μ+μ−). Probing charm CP violation at the 10−5 level may result in its long sought discovery. Major advances in hadron spectroscopy will be possible, which will be powerful probes of low energy QCD. Upgrade II potentially will have the highest sensitivity of all the LHC experiments on the Higgs to charm-quark couplings. Generically, the new physics mass scale probed, for fixed couplings, will almost double compared with the pre-HL-LHC era; this extended reach for flavour physics is similar to that which would be achieved by the HE-LHC proposal for the energy frontier

LHCb upgrade software and computing : technical design report

This document reports the Research and Development activities that are carried out in the software and computing domains in view of the upgrade of the LHCb experiment. The implementation of a full software trigger implies major changes in the core software framework, in the event data model, and in the reconstruction algorithms. The increase of the data volumes for both real and simulated datasets requires a corresponding scaling of the distributed computing infrastructure. An implementation plan in both domains is presented, together with a risk assessment analysis

A study of CP violation in B-+/- -> DK +/- and B-+/- -> D pi(+/-) decays with D -> (KSK +/-)-K-0 pi(-/+) final states

A first study of CP violation in the decay modes $B^\pm\to [K^0_{\rm S} K^\pm \pi^\mp]_D h^\pm$ and $B^\pm\to [K^0_{\rm S} K^\mp \pi^\pm]_D h^\pm$, where $h$ labels a $K$ or $\pi$ meson and $D$ labels a $D^0$ or $\overline{D}^0$ meson, is performed. The analysis uses the LHCb data set collected in $pp$ collisions, corresponding to an integrated luminosity of 3 fb$^{-1}$. The analysis is sensitive to the CP-violating CKM phase $\gamma$ through seven observables: one charge asymmetry in each of the four modes and three ratios of the charge-integrated yields. The results are consistent with measurements of $\gamma$ using other decay modes

Measurement of the (eta c)(1S) production cross-section in proton-proton collisions via the decay (eta c)(1S) -> p(p)over-bar

The production of the $\eta_c (1S)$ state in proton-proton collisions is probed via its decay to the $p \bar{p}$ final state with the LHCb detector, in the rapidity range $2.0 6.5$ GeV/c. The cross-section for prompt production of $\eta_c (1S)$ mesons relative to the prompt $J/\psi$ cross-section is measured, for the first time, to be $\sigma_{\eta_c (1S)}/\sigma_{J/\psi} = 1.74 \pm 0.29 \pm 0.28 \pm 0.18 _{B}$ at a centre-of-mass energy $\sqrt{s} = 7$ TeV using data corresponding to an integrated luminosity of 0.7 fb$^{-1}$, and $\sigma_{\eta_c (1S)}/\sigma_{J/\psi} = 1.60 \pm 0.29 \pm 0.25 \pm 0.17 _{B}$ at $\sqrt{s} = 8$ TeV using 2.0 fb$^{-1}$. The uncertainties quoted are, in order, statistical, systematic, and that on the ratio of branching fractions of the $\eta_c (1S)$ and $J/\psi$ decays to the $p \bar{p}$ final state. In addition, the inclusive branching fraction of $b$-hadron decays into $\eta_c (1S)$ mesons is measured, for the first time, to be $B ( b \rightarrow \eta_c X ) = (4.88 \pm 0.64 \pm 0.25 \pm 0.67 _{B}) \times 10^{-3}$, where the third uncertainty includes also the uncertainty on the $J/\psi$ inclusive branching fraction from $b$-hadron decays. The difference between the $J/\psi$ and $\eta_c (1S)$ meson masses is determined to be $114.7 \pm 1.5 \pm 0.1$ MeV/c$^2$.The production of the $\eta _c (1S)$ state in proton-proton collisions is probed via its decay to the $p\overline{p}$ final state with the LHCb detector, in the rapidity range $2.0 6.5 \mathrm{{\,GeV/}{ c}}$ . The cross-section for prompt production of $\eta _c (1S)$ mesons relative to the prompt ${{ J}}/{\psi }$ cross-section is measured, for the first time, to be $\sigma _{\eta _c (1S)}/\sigma _{{{{ J}}/{\psi }}} = 1.74\, \pm \,0.29\, \pm \, 0.28\, \pm \,0.18 _{{\mathcal{B}}}$ at a centre-of-mass energy ${\sqrt{s}} = 7 {~\mathrm{TeV}}$ using data corresponding to an integrated luminosity of 0.7 fb$^{-1}$ , and $\sigma _{\eta _c (1S)}/\sigma _{{{{ J}}/{\psi }}} = 1.60 \pm 0.29 \pm 0.25 \pm 0.17 _{{\mathcal{B}}}$ at ${\sqrt{s}} = 8 {~\mathrm{TeV}}$ using 2.0 fb$^{-1}$ . The uncertainties quoted are, in order, statistical, systematic, and that on the ratio of branching fractions of the $\eta _c (1S)$ and ${{ J}}/{\psi }$ decays to the $p\overline{p}$ final state. In addition, the inclusive branching fraction of ${b}$ -hadron decays into $\eta _c (1S)$ mesons is measured, for the first time, to be ${\mathcal{B}}( b {\rightarrow } \eta _c X ) = (4.88\, \pm \,0.64\, \pm \,0.29\, \pm \, 0.67 _{{\mathcal{B}}}) \times 10^{-3}$ , where the third uncertainty includes also the uncertainty on the ${{ J}}/{\psi }$ inclusive branching fraction from ${b}$ -hadron decays. The difference between the ${{ J}}/{\psi }$ and $\eta _c (1S)$ meson masses is determined to be $114.7 \pm 1.5 \pm 0.1 {\mathrm {\,MeV\!/}c^2}$ .The production of the $\eta_c (1S)$ state in proton-proton collisions is probed via its decay to the $p \bar{p}$ final state with the LHCb detector, in the rapidity range $2.0 6.5$ GeV/c. The cross-section for prompt production of $\eta_c (1S)$ mesons relative to the prompt $J/\psi$ cross-section is measured, for the first time, to be $\sigma_{\eta_c (1S)}/\sigma_{J/\psi} = 1.74 \pm 0.29 \pm 0.28 \pm 0.18 _{B}$ at a centre-of-mass energy $\sqrt{s} = 7$ TeV using data corresponding to an integrated luminosity of 0.7 fb$^{-1}$, and $\sigma_{\eta_c (1S)}/\sigma_{J/\psi} = 1.60 \pm 0.29 \pm 0.25 \pm 0.17 _{B}$ at $\sqrt{s} = 8$ TeV using 2.0 fb$^{-1}$. The uncertainties quoted are, in order, statistical, systematic, and that on the ratio of branching fractions of the $\eta_c (1S)$ and $J/\psi$ decays to the $p \bar{p}$ final state. In addition, the inclusive branching fraction of $b$-hadron decays into $\eta_c (1S)$ mesons is measured, for the first time, to be $B ( b \rightarrow \eta_c X ) = (4.88 \pm 0.64 \pm 0.29 \pm 0.67 _{B}) \times 10^{-3}$, where the third uncertainty includes also the uncertainty on the $J/\psi$ inclusive branching fraction from $b$-hadron decays. The difference between the $J/\psi$ and $\eta_c (1S)$ meson masses is determined to be $114.7 \pm 1.5 \pm 0.1$ MeV/c$^2$