On the Treatment of Rayons with Synthetic Resins by Means of an Improved Method.(VIII)：Some Basic Studies on the Properties of Fibers as Revealed by the New Poly-functional wear Tester Already Reported

In one of the foregoing papers on the present title, i.e. in the series(VI), The authors introduced a newly contrived poly-functional, versatile wear tester, together with the data on many kinds of samples and the interpretations thereof. With a view to establishing a more rational evaluation of fivers as to an over-all wear rating if possible, and also obtaining some information which might give suggestions for the improvement of treatment of fivers and fabrics, the authors tried to start with basic studies on the properties of unspun fibers, and especially with those of the behaviours when the fibers are subjected to the so-called “T.N.S. Universal Tester”, the poly-functional versatile one mentioned above. A tensile fatigue tester was also used in parallel with the Tester. Comparisons were made with the results of tasting from 3 different kinds of testing mechanisms , and confirmed the former findings that in the long fiber (the unspunn fiber) the mechanism of breaking the fiber structure is not always the same accrding as, and is particularly related to, the range of the strength of stress absorption of stress by the fiber is quite specifically proper to itself according as the mode of structure of each fiber. These conditions determine each own characteristic curve as tested by the Tester. The cycle n and the strength of (starting) stress f are in the relation N=Ne-Kl2, where N and k are constant. And k is a constant so far the mechanism of breaking the fiber is unchanged. The nature of the meaning of k in the rheological or other physical sense is not well elucidated, but for the time being, under the present testing condition, a soft of theoretical over-all wear capacity can be expressed by the 3 dimentional model, taking ln n, f, 1/k, or ln n, f, f, as factors, and assuming the smallest f, which is practically significant in breaking fivers in common Some practical consideration and discussion concerning discrimination of the results together with some suggestions are also given

On the Treatment of Rayons with Synthetic Resins by Means of an Improved Method (XIX) The Stepwise Study on the “Presiton Process" in the Tow Form on a Semi Industrial Scale (11) From 'Presiton S' to' Presiton SW'

In continuation of the foregoing paper，the present one deals with the next step of treatments in the “Presiton Process" on a semi industrial scale for the present sample， ‘Presiton S'. which is to bring about a thin outer layer of the second resin on the surface of the sample，and also to set the reactive dye at the same time on the peeled and disc10sed surface of the cellulosic fiber. The meaning and the theory of preparing ‘Presiton SW' are herewith given in the introduction. And the optimum conditions of preparing a good ‘Presiton SW' with respect to the used resin and dye are determined. and given as in the followings; The reactive dye ; Procion Brill. Orange GS The dye concentration in the 1st bath; 1 % The dip time 15 minutes The resin COnc. in the 2nd bath ; 4 % Catalyser ;D.A.P.，5 %， o. w. of resin Cure temp. and time ; 130℃ x 5 min

Research Activities in the Department of Nursing

Research activity at the Department of Nursing is overviewed from the point of research topics, the theme of the projects admitted for grant from the Ministry of Education and Science of Japan, and expected research topics, trying to clarify the needs and challenges of the Department from multilateral aspects in future research activities. The Department of Nursing, Aino University is currently divided into the five areas and further into 12 fields. On the other hand, according to the Scientific Research Grant Program (2015 fiscal year), the research topics in nursing science is subdivided into the five areas; a) basic nursing, b) clinical nursing, c) lifelong developmental nursing, d) elderly nursing, and e) community health nursing

The Functional Implications of Endothelial Gap Junctions and Cellular Mechanics in Vascular Angiogenesis

Angiogenesis—the sprouting and growth of new blood vessels from the existing vasculature—is an important contributor to tumor development, since it facilitates the supply of oxygen and nutrients to cancer cells. Endothelial cells are critically affected during the angiogenic process as their proliferation, motility, and morphology are modulated by pro-angiogenic and environmental factors associated with tumor tissues and cancer cells. Recent in vivo and in vitro studies have revealed that the gap junctions of endothelial cells also participate in the promotion of angiogenesis. Pro-angiogenic factors modulate gap junction function and connexin expression in endothelial cells, whereas endothelial connexins are involved in angiogenic tube formation and in the cell migration of endothelial cells. Several mechanisms, including gap junction function-dependent or -independent pathways, have been proposed. In particular, connexins might have the potential to regulate cell mechanics such as cell morphology, cell migration, and cellular stiffness that are dynamically changed during the angiogenic processes. Here, we review the implication for endothelial gap junctions and cellular mechanics in vascular angiogenesis

Thrombotic Mechanism Involving Platelet Activation, Hypercoagulability and Hypofibrinolysis in Coronavirus Disease 2019

Coronavirus disease 2019 (COVID-19) has spread, with thrombotic complications being increasingly frequently reported. Although thrombosis is frequently complicated in septic patients, there are some differences in the thrombosis noted with COVID-19 and that noted with bacterial infections. The incidence (6–26%) of thrombosis varied among reports in patients with COVID-19; the incidences of venous thromboembolism and acute arterial thrombosis were 4.8–21.0% and 0.7–3.7%, respectively. Although disseminated intravascular coagulation (DIC) is frequently associated with bacterial infections, a few cases of DIC have been reported in association with COVID-19. Fibrin-related markers, such as D-dimer levels, are extremely high in bacterial infections, whereas soluble C-type lectin-like receptor 2 (sCLEC-2) levels are high in COVID-19, suggesting that hypercoagulable and hyperfibrinolytic states are predominant in bacterial infections, whereas hypercoagulable and hypofibrinolytic states with platelet activation are predominant in COVID-19. Marked platelet activation, hypercoagulability and hypofibrinolytic states may cause thrombosis in patients with COVID-19

A Clot Waveform Analysis of Thrombin Time Using a Small Amount of Thrombin Is Useful for Evaluating the Clotting Activity of Plasma Independent of the Presence of Emicizumab

Objective: Although emicizumab is a bispecific, monoclonal antibody that has led to a significant improvement of treatment for hemophilia A patients with inhibitors, the routine monitoring of patients treated with emicizumab is difficult. Thrombin time (TT) reflects thrombin burst, which mainly depends on activation of factor V (FV) and FVIII. Methods: We, therefore, developed a method for evaluating clotting activity independent of the presence of emicizumab. Normal plasma (NP) or FVIII-deficient plasma (FVIIIDP) with and without emicizumab was measured using clot waveform analysis (CWA)-activated partial thromboplastin time (APTT) and TT. Results: Emicizumab caused clot formation in FVIIIDP using the CWA-APTT; however, the coagulation peaks of plasma with and without emicizumab measured by the CWA-TT did not differ to a statistically significant extent. Regarding the mixing tests with NP and FVIIIDP, CWA-APTT showed large differences between each mixing test in plasma with and without emicizumab, whereas the CWA-TT showed similar patterns in mixing plasma with and without emicizumab. Regarding the standard curve of FVIII activity, the CWA-APTT showed an FVIII-concentration-dependent increase; however, the values with each concentration of FVIII differed between samples with and without emicizumab, whereas CWA-TT showed FVIII-concentration-dependent fluctuations independent of the presence of emicizumab, and the values with each concentration of FVIII were similar in samples with and without emicizumab. Conclusions: As CWA-TT using a small amount of thrombin (0.5 IU/mL) can reflect thrombin burst and be useful for evaluating FVIII activity, independent of the presence of emicizumab, it is useful for monitoring clotting activity in patients with an anti-FVIII inhibitor treated with emicizumab

Increased serum IgG4 levels and intimal IgG4-positive cell infiltration in rapidly growing aortic aneurysm

A 67-year-old Japanese man had been complaining of discomfort in the chest and back and feeling febrile for 2 weeks. Chest computed tomography indicated a thoracic aortic aneurysm. He occasionally showed a high fever (up to 38.0°C), even after hospital admission, irrespective of antibiotic therapy. The patient was found to have elevated serum IgG4 levels (366 mg/dL). The aneurysm demonstrated rapid growth; therefore, rifampicin-soaked woven Dacron synthetic graft replacement was performed 22 days after admission. Immunohistostatining of the resected aorta segment showed an IgG4-positive plasma cell infiltrate within the intimal layer neighboring the cholesterol-rich atheromatous plaque. After surgery, the patient’s serum IgG4 level dropped acutely; however, it did not reach the normal range. The possible role of IgG4 in the development or suppression of aortic remodeling, as well as in atherogenesis, among patients with rapidly growing aortic aneurysm requires further investigation

Recombinant Human Soluble Thrombomodulin Suppresses Monocyte Adhesion by Reducing Lipopolysaccharide-Induced Endothelial Cellular Stiffening

Endothelial cellular stiffening has been observed not only in inflamed cultured endothelial cells but also in the endothelium of atherosclerotic regions, which is an underlying cause of monocyte adhesion and accumulation. Although recombinant soluble thrombomodulin (rsTM) has been reported to suppress the inflammatory response of endothelial cells, its role in regulating endothelial cellular stiffness remains unclear. The purpose of this study was to investigate the impact of anticoagulant rsTM on lipopolysaccharide (LPS)-induced endothelial cellular stiffening. We show that LPS increases endothelial cellular stiffness by using atomic force microscopy and that rsTM reduces LPS-induced cellular stiffening not only through the attenuation of actin fiber and focal adhesion formation but also via the improvement of gap junction functionality. Moreover, post-administration of rsTM, after LPS stimulation, attenuated LPS-induced cellular stiffening. We also found that endothelial cells regulate leukocyte adhesion in a substrate- and cellular stiffness-dependent manner. Our result show that LPS-induced cellular stiffening enhances monocytic THP-1 cell line adhesion, whereas rsTM suppresses THP-1 cell adhesion to inflamed endothelial cells by reducing cellular stiffness. Endothelial cells increase cellular stiffness in reaction to inflammation, thereby promoting monocyte adhesion. Treatment of rsTM reduced LPS-induced cellular stiffening and suppressed monocyte adhesion in a cellular stiffness-dependent manner

Plasma Soluble Fibrin Is Useful for the Diagnosis of Thrombotic Diseases

Background: Soluble fibrin (SF) is a form of fibrinogen that is activated by thrombin and is considered to be useful for the diagnosis of the prethrombotic state or thrombosis. Methods: Plasma levels of fibrin-related markers (FRMs), such as SF, D-dimer, fibrinogen, and fibrin degradation prioduct (FDP) levels in critically ill patients, were examined for the diagnosis of disseminated intravascular coagulation (DIC), venous thromboembolism (VTE), peripheral arterial thromboembolism (PATE), acute myocardial infarction (AMI), and acute cerebral infarction (ACI). Results: FRMs showed the usefulness in diagnosing DIC and VTE and the cutoff values of D-dimer, FDP, and SF for DIC were 7.2–7.8 μg/mL, 10.0 μg/mL, and 9.5 μg/mL, respectively. The cutoff values of D-dimer and FDP for VTE were similar to the 97.5th percentile values of healthy volunteers, while the cutoff value of SF was 6.9 μg/mL. In AMI and ACI, the cutoff values of D-dimer and FDP were lower than the 97.5 percentile values of healthy volunteers. A receiver operating characteristic analysis for all thrombosis cases showed that an adequate cutoff value in only SF among FRMs was higher than the confidence interval of healthy volunteers. Only SF had high sensitivity for thrombosis, as the FDP/SF ratio was markedly low for ACI, AMI and VTE. Conclusions: FRMs, especially D-dimer and FDP, were useful for diagnosing thrombosis with hyperfibrinolysis (e.g., DIC). As SF showed high sensitivity for predominantly thrombotic diseases, including arterial thrombosis, such as ACI and AMI, a high SF value suggests the possibility of an association with thrombosis. Finally, SF is the most useful marker for raising suspicion of an association with thrombosis, especially arterial thrombosis