Orbital- and spin-phase variability in the X-ray emission from the accreting pulsar Cen X-3

We analyzed 39 ks NuSTAR observation data of the high mass X-ray binary Cen X-3 in order to investigate the orbital- and spin-phase spectral variability. The observation covers the orbital phase of $\Phi=0.199$-$0.414$ of the source, where $\Phi=0$ corresponds to the mid-eclipse. The orbital-phase-resolved spectroscopy revealed that low energy photons are more dominant for the spectral fluctuation, and a large part of the variability can be explained in terms of absorption by clumps of stellar wind. The spin-phase-resolved spectroscopy together with energy-resolved pulse profiles, on the other hand, presented large flux variations in high energy bands, which suggests that the origin of the variability is the different efficiency of Comptonization inside the accretion column. The energy band which includes Fe emission lines or cyclotron resonance scattering feature (CRSF) shows distinct variability compared to the nearby bands. The Fe lines show low variability along the spin phase, which indicates that the emission regions are apart from the neutron star. The central energy and strength of the CRSF are both positively correlated with the spin-phase-resolved flux, which suggests that the emitted photons face stronger magnetic fields and deeper absorption when they come from high-flux regions. We also examined the independence of the orbital- and spin-phase variability. They showed no correlation with each other and were highly independent, which implies the accretion stream is stable during the observation.Comment: 20 pages, 12 figures, accepted for publication in Ap

Development of Gas Multiplier Counters (GMCs) Onboard the 6U CubeSat X-Ray Observatory NinjaSat

We report the development of Gas Multiplier Counters (GMCs) onboard the 6U CubeSat X-ray observatory NinjaSat, scheduled to be launched in October 2023. GMC is a 1U-size non-imaging gas X-ray detector sensitive to 2–50 keV X-rays, and two identical GMCs are mounted on NinjaSat. GMC consists of a gas cell filled with a xenon/argon/dimethyl ether (75%/24%/1%) gas mixture with a pressure of 1.2 atm at 0◦C, a high voltage supply and analog signal processing board, a digital signal processing board, an X-ray collimator of a 2.1◦ field of view, and an iron-55 calibration source. The most significant feature of the GMC is its large effective area of 32 cm2 at 6 keV, which is more than two orders of magnitude larger than the X-ray detectors onboard previously launched CubeSats. We have achieved this at a low cost and in a short development time by employing a gas detector that can easily increase its effective area and using a space-proven gas electron multiplier. GMC was characterized with X-rays from an X-ray generator in a laboratory and monochromatic X-rays on the BL-14A beamline at the KEK synchrotron radiation facility. In this paper, we present the design of GMC and the preliminary results of the detector calibration

NinjaSat: 6U CubeSat Observatory for Bright X-Ray Sources

NinjaSat is a 6U CubeSat observatory designed for long-term monitoring of bright X-ray sources, such as binary systems between normal stars and black holes or neutron stars. NinjaSat is the first Japanese CubeSat dedicated to astronomical observation, and it is also a mission to demonstrate that even a small satellite, which can be developed quickly and inexpensively, unlike large satellites, can perform excellent scientific observations. NinjaSat realizes the world’s highest X-ray sensitivity in CubeSat missions by using gas X-ray detectors filling the entire space allocated for science payloads. The fabrication of the flight model payloads began in 2021, and testing at the payload component level was completed in August 2022; as of April 2023, the payloads were integrated into the Nano Avionics 6U bus (M6P) in Lithuania. After four months of testing, the payload will be stored in the Exolaunch deployer in August and launched by the SpaceX Transporter-9 mission in October 2023. This paper will describe the scientific objectives, satellite structure, payloads, and operations of NinjaSat

Development of Radiation Belt Monitors for the 6U CubeSat X-Ray Observatory NinjaSat

NinjaSat is a 6U CubeSat-sized X-ray observatory to be launched into the low Earth orbit at an altitude of 550 km, and is scheduled for launch this October. NinjaSat is equipped with two 1U-sized gas X-ray detectors (GMC) and is expected to operate mainly for astronomical observations of bright X-ray objects in the sky, such as neutron stars and black holes. Since high voltages are applied to the gas cells of GMC, two radiation belt monitors (RBM) will also be installed to protect GMC from electrical discharges potentially caused by excessively high rate of charged particles. NinjaSat RBM will play a fail-safe function in the voltage suppression operation of GMC in the auroral zone and South Atlantic Anomaly, and also protect GMC from charged particles such as protons and electrons that arrive unexpectedly due to solar flares or other low-Earth orbit radiation events. RBM uses a 9 mm x 9 mm Si-PIN photodiode as a charged particle sensor. By taking advantage of the difference in sensor response to protons and electrons, the sensor is designed to simultaneously count charged particle rates at multiple energy thresholds so that GMC protection function will operate even if either the proton or electron rate increases. RBM can count up to about 10 kcps with almost no loss of counts, and proton beam tests have confirmed that the response performance is sufficient to protect GMC against excessively high charged particle rates above 10 Mcps without choking the circuitry. The flight models of the RBM have passed the thermal vacuum and vibration tests last year. The developed RBM occupies only about 6% of the 1U CubeSat size in volume and weighs only 70g. In addition, since the RBM uses inexpensive, commercially available sensors, it could be installed on small satellites other than NinjaSat with relatively small development resources

Return of the Big Glitcher: NICER timing and glitches of PSR J0537−6910

International audiencePSR J0537−6910, also known as the Big Glitcher, is the most prolific glitching pulsar known, and its spin-induced pulsations are only detectable in X-ray. We present results from analysis of 2.7 yr of NICER timing observations, from 2017 August to 2020 April. We obtain a rotation phase-connected timing model for the entire time span, which overlaps with the third observing run of LIGO/Virgo, thus enabling the most sensitive gravitational wave searches of this potentially strong gravitational wave-emitting pulsar. We find that the short-term braking index between glitches decreases towards a value of 7 or lower at longer times since the preceding glitch. By combining NICER and RXTE data, we measure a long-term braking index n = −1.25 ± 0.01. Our analysis reveals eight new glitches, the first detected since 2011, near the end of RXTE, with a total NICER and RXTE glitch activity of |$8.88\times 10^{-7}\, \mathrm{yr^{-1}}$|⁠. The new glitches follow the seemingly unique time-to-next-glitch–glitch-size correlation established previously using RXTE data, with a slope of |$5\, \rm {d} \, \mu \mathrm{Hz}^{-1}$|⁠. For one glitch around which NICER observes 2 d on either side, we search for but do not see clear evidence of spectral nor pulse profile changes that may be associated with the glitch