1,113 research outputs found
Investigation of fluid flow in a troque converter's stator using Computational Fluid Dynamics methods
University of Technology, Sydney. Faculty of Engineering and Information Technology.An automotive torque converter is a widely used hydro-mechanical device for transferring engine power to the transmission in the modern automotive industries. The typical three-dimensional geometrical structures of the stator, pump and turbine made this torque converter very complex. The goal of this study is to gain a sound understanding of the complex three-dimensional fluid flow inside the stator. This study was performed using Computational Fluid Dynamics software. For the sake of gaining a sound understanding, all three elements of the torque converter were included in the simulation. The geometry for the torque converter used was a donation from Dr Mahesh Athavale (Manager, CFDRC). However, the construction of the geometry was thoroughly studied to gain a comprehensive understanding of the construction as well as making the necessary changes. The performance of the torque converter was compared with existing data. This was undertaken for the validation of the work. Then the fluid flow was studied for a changed stator blade number. Thus the variation of performance can easily be noticed with the change in the geometrical structure. The effect of pseudo plastic fluid and dilatant fluid was also studied in order to determine the performance characteristics. All these investigations would lead to a clearer realization of the fluid flow inside the stator and thus help to increase the performance of the torque converter. Out of this research studies on torque converter two publications have been produced.
1. IMECE2011-65078: Effects of Number of Stator Blades on the Performance of a Torque Converter, which was published by the ASME conference 2011, held on November 11-17, 2011, Denver, Colorado, USA.
2. 18th AFMC-2012: Numerical Study of Performance of a Torque Converter Employing a Power-Law Fluid, which was published by the AFMC on its 18th conference, held on December 3-7, 2012, Launceston, Tasmania, Australia
Time for pulse traversal through slabs of dispersive and negative (, ) materials
The traversal times for an electromagnetic pulse traversing a slab of
dispersive and dissipative material with negative dielectric permittivity
() and magnetic permeability () have been calculated by using
the average flow of electromagnetic energy in the medium. The effects of
bandwidth of the pulse and dissipation in the medium have been investigated.
While both large bandwidth and large dissipation have similar effects in
smoothening out the resonant features that appear due to Fabry-P\'{e}rot
resonances, large dissipation can result in very small or even negative
traversal times near the resonant frequencies. We have also investigated the
traversal times and Wigner delay times for obliquely incident pulses and
evanescent pulses. The coupling to slab plasmon polariton modes in frequency
ranges with negative or is shown to result in large traversal
times at the resonant conditions. We also find that the group velocity mainly
contributes to the delay times for pulse propagating across a slab with n=-1.
We have checked that the traversal times are positive and subluminal for pulses
with sufficiently large bandwidths.Comment: 9 pages, 9 figures, Submitted to Phys. Rev.
Drug resistance in Plasmodium falciparum from the Chittagong Hill Tracts, Bangladesh.
OBJECTIVE: To assess the efficacy of antimalarial treatment and molecular markers of Plasmodium falciparum resistance in the Chittagong Hill Tracts of Bangladesh. METHODS: A total of 203 patients infected with P. falciparum were treated with quinine 3 days plus sulphadoxine/pyrimethamine (SP) combination therapy, and followed up during a 4-week period. Blood samples collected before treatment were genotyped for parasite mutations related to chloroquine (pfcrt and pfmdr1 genes) or SP resistance (dhfr and dhps). RESULTS: Of 186 patients who completed follow-up, 32 patients (17.2%) failed to clear parasitaemia or became positive again within 28 days after treatment. Recurring parasitaemia was related to age (chi(2) = 4.8, P < 0.05) and parasite rates on admission (t = 3.1, P < 0.01). PCR analysis showed that some of these cases were novel infections. The adjusted recrudescence rate was 12.9% (95% CI 8.1-17.7) overall, and 16.6% (95% CI 3.5-29.7), 15.5% (95% CI 8.3-22.7) and 6.9% (95% CI 0.4-13.4) in three age groups (<5 years, 5-14, > or =15). The majority of infections carried mutations associated with chloroquine resistance: 94% at pfcrt and 70% at pfmdr. Sp-resistant genotypes were also frequent: 99% and 73% of parasites carried two or more mutations at dhfr and dhps, respectively. The frequency of alleles at dhfr, dhps and pfmdr was similar in cases that were successfully treated and those that recrudesced. CONCLUSIONS: The clinical trial showed that quinine 3-days combined to SP is still relatively effective in the Chittagong Hill Tracts. However, if this regimen is continued to be widely used, further development of SP resistance and reduced quinine sensitivity are to be expected. The genotyping results suggest that neither chloroquine nor SP can be considered a reliable treatment for P. falciparum malaria any longer in this area of Bangladesh
Multicentric Castleman's Disease in a Hepatitis C-Positive Intravenous Drug User: A Case Report
Introduction. We report a rare presentation of Castleman's disease in a hepatitis C-positive patient and present a short review of treatments described in other similar case reports and studies. Case Presentation. A 46-year-old male with untreated hepatitis C and a 16-year history of intravenous drug use presented with pleuritic chest pain and bony pain in the knee, hip, and lower back, on a background of unexplained weight loss of 40 kilograms, fevers, night sweats, and repeated infections over the last two years. Examination discovered tender hepatomegaly, a warm right knee effusion, and painless lymphadenopathy. The patient was reactive to Epstein Barr virus and cytomegalovirus; however, HIV and HHV-8 viral testing was negative. Osteomyelitis of vertebrae T8–T11 and septic arthritis of the knee were found on investigation. A lymph node biopsy revealed histology suggestive of plasmacytic Castleman's disease. The patient is to commence rituximab treatment.
Conclusion. Castleman's disease continues to present in novel ways, which may lead to difficulties in clinicopathologic diagnosis. A growing body of evidence suggests larger studies are required to determine the best treatment for multicentric Castleman's disease, particularly in patients with a concomitant disease, including hepatitis C
Surface plasmon coupled emission enhancement with nanoparticles in the metal layer
We show that it is possible to enhance surface plasmon coupled emission (SPCE) intensity by ∼55% using two dimensional periodic nanoparticle arrays in the glass-metal layer interface of an SPCE structure. The nanoparticles act as coupled nanoantennas. With optimized dimensions and periodicity, the nanoparticle arrays resonate and re-emit intensified SPCE. In this work, two types of nanoparticles such as cuboids and hemispheres are used in the arrays. The optimized dimensions and periodicity of the nanoparticle arrays that lead to enhanced intensity are calculated using the particle swarm algorithm. The increased SPCE intensity will be helpful for using SPCE as a biomolecule detection scheme
Duration of low temperature changes physiological and biochemical attributes of rice seedling
Received: June 2nd, 2022 ; Accepted: August 4th, 2022 ; Published: August 18th, 2022 ; Correspondence: [email protected] low temperature (LT) is detrimental to growth of rice seedling during boro season
in Bangladesh. An experiment was conducted in growth chamber during June to October, 2021
using BRRI dhan29 as planting material. The aim of this experiment was to determine the effect
of variable duration of LT on growth, physiological and biochemical traits of rice seedling and to
determine the age of seedling that can tolerate cold effect. In this experiment 5, 10, 15 and 20
days old seedling (DOS) were exposed to 6 °C for 1, 2, 3 and 4 days. Seedlings were also grown
under room temperature (25 °C, RT) which consider as control treatment. Seedlings were grown
in plastic trays filled with mixture of soil and cowdung. The experiment was conducted following
completely randomized design with 3 replications. Data on shoot length and weight, root length
and weight, chlorophyll (Chl), carotenoids, malondialdehyde (MDA) and proline contain were
determined after 5 days of temperature sock. The results revealed that the LT was injurious to
younger rice seedling when they were exposed to LT for 1 to 2 days. The shoot and root length
as well as their dry weight were reduced under low temperature. Further, the Chl and carotenoid
content of younger rice seedlings degraded within 2 days of LT exposure. On the contrary, the
proline and MDA content of rice seedlings increased to reduce the harmful effect of under LT. It
could be concluded that the rice seedlings could tolerate the detrimental effect of LT when they
attain at least 15 days
A Non-invasive Technique to Detect Authentic/Counterfeit SRAM Chips
Many commercially available memory chips are fabricated worldwide in
untrusted facilities. Therefore, a counterfeit memory chip can easily enter
into the supply chain in different formats. Deploying these counterfeit memory
chips into an electronic system can severely affect security and reliability
domains because of their sub-standard quality, poor performance, and shorter
lifespan. Therefore, a proper solution is required to identify counterfeit
memory chips before deploying them in mission-, safety-, and security-critical
systems. However, a single solution to prevent counterfeiting is challenging
due to the diversity of counterfeit types, sources, and refinement techniques.
Besides, the chips can pass initial testing and still fail while being used in
the system. Furthermore, existing solutions focus on detecting a single
counterfeit type (e.g., detecting recycled memory chips). This work proposes a
framework that detects major counterfeit static random-access memory (SRAM)
types by attesting/identifying the origin of the manufacturer. The proposed
technique generates a single signature for a manufacturer and does not require
any exhaustive registration/authentication process. We validate our proposed
technique using 345 SRAM chips produced by major manufacturers. The silicon
results show that the test scores ( score) of our proposed technique of
identifying memory manufacturer and part-number are 93% and 71%, respectively.Comment: This manuscript has been submitted for possible publication.
Copyright may be transferred without notice, after which this version may no
longer be accessibl
- …