DNA repair genes XRCC1 and XRCC3 polymorphisms and their relationship with the level of micronuclei in breast cancer patients

Breast cancer (BC) is the most prevalent type worldwide, besides being one of the most common causes of death among women. It has been suggested that sporadic BC is most likely caused by low-penetrance genes, including those involved in DNA repair mechanisms. Furthermore, the accumulation of DNA damage may contribute to breast carcinogenesis. In the present study, the relationship between two DNA repair genes, viz., XRCC1 (Arg399Gln) and XRCC3 (Thr241Met) polymorphisms, and the levels of chromosome damage detected in 65 untreated BC women and 85 healthy controls, was investigated. Chromosome damage was evaluated through micronucleus assaying, and genotypes determined by PCR-RFLP methodology. The results showed no alteration in the risk of BC and DNA damage brought about by either XRCC1 (Arg399Gln) or XRCC3 (Thr241Met) action in either of the two groups. Nevertheless, on evaluating BC risk in women presenting levels of chromosome damage above the mean, the XRCC3Thr241Met polymorphism was found to be more frequent in the BC group than in the control, thereby leading to the conclusion that there is a slight association between XRCC3 (241 C/T) genotypes and BC risk in the subgroups with higher levels of chromosome damage

Palbociclib in combination with aromatase inhibitors in patients ≥ 75 years with oestrogen receptor-positive, human epidermal growth factor receptor 2 negative advanced breast cancer : a real-world multicentre UK study

Background Breast cancer incidence increases with age and real-world data is essential to guide prescribing practices in the older population. The aim of this study was to collect large scale real-world data on tolerability and efficacy of palbociclib + AI in the first line treatment of ER+/HER2-advanced breast cancer in those aged ≥75 years. Methods 14 cancer centres participated in this national UK retrospective study. Patients aged ≥75 years treated with palbociclib + AI in the first line setting were identified. Data included baseline demographics, disease characteristics, toxicities, dose reductions and delays, treatment response and survival data. Multivariable Cox regression was used to assess independent predictors of PFS, OS and toxicities. Results 276 patients met the eligibility criteria. The incidence of febrile neutropenia was low (2.2%). The clinical benefit rate was 87%. 50.7% of patients had dose reductions and 59.3% had dose delays. The 12- and 24- month PFS rates were 75.9% and 64.9%, respectively. The 12- and 24- month OS rates were 85.1% and 74.0%, respectively. Multivariable analysis identified PS, Age-adjusted Charlson Comorbidity Index (ACCI) and number of metastatic sites to be independent predictors of PFS. Dose reductions and delays were not associated with adverse survival outcomes. Baseline ACCI was an independent predictor of development and severity of neutropenia. Conclusion Palbociclib is an effective therapy in the real-world older population and is well-tolerated with low levels of clinically significant toxicities. The use of geriatric and frailty assessments can help guide decision making in these patients

Genetic polymorphism of the iron-regulatory protein-1 and -2 genes in age-related macular degeneration

Iron can be involved in the pathogenesis of AMD through the oxidative stress because it may catalyze the Haber–Weiss and Fenton reactions converting hydrogen peroxide to free radicals, which can induce cellular damage. We hypothesized that genetic polymorphism in genes related to iron metabolism may predispose individuals to the development of AMD and therefore we checked for an association between the g.32373708 G>A polymorphism (rs867469) of the IRP1 gene and the g.49520870 G>A (rs17483548) polymorphism of the IRP2 gene and AMD risk as well as the modulation of this association by some environmental and life-style factors. Genotypes were determined in DNA from blood of 269 AMD patients and 116 controls by the allele-specific oligonucleotide-restriction fragment length polymorphism and the polymerase chain reaction-restriction fragment length polymorphism. An association between AMD, dry and wet forms of AMD and the G/G genotype of the g.32373708 G>A-IRP1 polymorphism was found (OR 3.40, 4.15, and 2.75). On the other hand, the G/A genotype reduced the risk of AMD as well as its dry or wet form (OR 0.23, 0.21, 0.26). Moreover, the G allele of the g.49520870 G>A-IRP2 polymorphism increased the risk of the dry form of the disease (OR 1.51) and the A/A genotype and the A allele decreased such risk (OR 0.43 and 0.66). Our data suggest that the g.32373708 G>A-IRP1 and g.49520870 G>A-IRP2 polymorphisms may be associated with increased risk for AMD

Perspectives on utilization of edible coatings and nano-laminate coatings for extension of postharvest storage of fruits and vegetables

It is known that in developing countries, a large quantity of fruit and vegetable losses results at postharvest and processing stages due to poor or scarce storage technology and mishandling during harvest. The use of new and innovative technologies for reducing postharvest losses is a requirement that has not been fully covered. The use of edible coatings (mainly based on biopolymers) as a postharvest technique for agricultural commodities has offered biodegradable alternatives in order to solve problems (e.g., microbiological growth) during produce storage. However, biopolymer-based coatings can present some disadvantages such as: poor mechanical properties (e.g., lipids) or poor water vapor barrier properties (e.g., polysaccharides), thus requiring the development of new alternatives to solve these drawbacks. Recently, nanotechnology has emerged as a promising tool in the food processing industry, providing new insights about postharvest technologies on produce storage. Nanotechnological approaches can contribute through the design of functional packing materials with lower amounts of bioactive ingredients, better gas and mechanical properties and with reduced impact on the sensorial qualities of the fruits and vegetables. This work reviews some of the main factors involved in postharvest losses and new technologies for extension of postharvest storage of fruits and vegetables, focused on perspective uses of edible coatings and nano-laminate coatings.María L. Flores-López thanks Mexican Science and Technology Council (CONACYT, Mexico) for PhD fellowship support (CONACYT Grant Number: 215499/310847). Miguel A. Cerqueira (SFRH/BPD/72753/2010) is recipient of a fellowship from the Fundação para a Ciência e Tecnologia (FCT, POPH-QREN and FSE Portugal). The authors also thank the FCT Strategic Project of UID/ BIO/04469/2013 unit, the project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and the project ‘‘BioInd Biotechnology and Bioengineering for improved Industrial and AgroFood processes,’’ REF. NORTE-07-0124-FEDER-000028 Co-funded by the Programa Operacional Regional do Norte (ON.2 – O Novo Norte), QREN, FEDER. Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico – FUNCAP, CE Brazil (CI10080-00055.01.00/13)

Wpływ metody numerycznej na estymację spadków ciśnienia w mieszalniku statycznym typu Koflo®

Pressure drop determines the power required to pump the fluid through the mixer and enables the selection of proper pumping device. In the presented paper there was an attempt to determine the pressure drops over a static mixer using CFD methods and to validate the developed model upon the vendor’s correlation. The study involved one-phase flow in the turbulent regime (Re = 1000÷5000). The numerical and experimental approach was obtained using the Koflo® Static Mixer consisted of 12 motionless mixing inserts installed in a pipe. It can be an interesting alternative to the commonly used Kenics type mixers, due to its simpler geometry and much smaller price. In order to perform numerical simulations a suitable model was created and then covered by generated mesh with an optimized number of elements on basis of the Grid Convergence Index (GCI). Turbulence model and other Fluent-solver settings were also selected. Analyzing the resulting data, a good accuracy between the numerical data and pressure drops calculated from manufacturer’s correlation was observed.Wartość spadku ciśnienia określa moc niezbędną do przetłoczenia płynu przez mieszalnik i umożliwia dobór odpowiedniego urządzenia pompującego. W pracy określono spadki ciśnienia w mieszalniku statycznym metodami CFD oraz dokonano walidacji opracowanego modelu na podstawie korelacji podawanej przez producenta. Rozpatrywano przepływ jednofazowy w reżimie burzliwym (Re = 1000÷5000). Wykorzystano konstrukcję mieszalnika Koflo®, zawierającą 12 nieruchomych elementów mieszających. Stanowi alternatywę dla powszechnie stosowanych mieszalników typu KENICS, ze względu na prostszą geometrię oraz znacznie niższą cenę. Stworzono odpowiedni model obrazujący geometrię mieszalnika i nałożono siatkę numeryczną posiadającą zoptymalizowaną na podstawie współczynnika GCI (Grid Convergence Index) liczbę elementów. Dokonano także doboru modelu turbulencji i pozostałych ustawień solvera Fluent 15. Analizując uzyskane dane zaobserwowano, że spadki ciśnienia uzyskane na drodze symulacji numerycznych są bliskie wartościom obliczonym w oparciu o wzór producenta