36 research outputs found
Towards High-Quality Large-Area Single-Crystalline Monolayer Graphene: the Critical Role of the Metal Template
Oral presentation by Ken Vergutsstatus: publishe
Graphene delamination using ‘electrochemical methods’: An ion intercalation effect
The mechanism of graphene delamination from a Pt catalyst growth surface with electrochemical
methods is studied. After a water intercalation step, an electrochemical graphene delamination process is
done with a variety of different electrolytes. It is shown that (hydrogen or oxygen) bubble formation is not
the main driving force to decouple graphene from its catalyst growth substrate. Ion intercalation is identified
as the primary component for a fast graphene delamination process from its catalytic growth substrate.
When the Pt/graphene sample is negatively charged, cations will intercalate, assuming they do not
reduce within the electrochemical window of the solvent. This cation intercalation does result in graphene
delamination. In the same way, anions intercalate in positively charged Pt/graphene samples when
they do not react within the electrochemical window of the solvent. Furthermore, it is shown that applying
a potential is sufficient (current is not needed) to induce ion intercalation and, as a result, graphene
delamination. These findings open the door to avoid Na+ or K+ contamination introduced during currently
described electrochemical graphene delamination. Alternative electrolytes (i.e. ammonium hydroxide and
tetraethylammonium hydroxide) are proposed, due to the absence of alkali contaminants and rapid cation
intercalation to delaminate graphene.The journal details (volume, issue and pagenumbers) are not known yet.status: publishe
The Importance of Control over Bubble Size Distribution in Pulsed Megasonic Cleaning
The presence of acoustic cavitation in the cleaning liquid is a crucial precondition for cleaning action. One can achieve enhanced cleaning by periodically switching the ultrasonic agitation on and off rather than sonicating the liquid in a continuous fashion. The physical effects leading to that improvement are investigated experimentally with a dedicated setup and correlated to cleaning results obtained in an experimental cleaning tank. With the first setup, sonoluminescence and cavitation noise are measured simultaneously while imaging the nucleation and the interaction of the bubbles with the sound field using Hi-Speed Stroboscopic Schlieren Imaging. In this way it is possible to identify the role of streamer bubbles and transient cavitation. Furthermore, the attenuation of the sound field due to the highly efficient bubble induced acoustic scattering and the growth of bubbles due to coalescence is investigated. The results give an idea of the stability of the bubble size distribution during and after the nucleation process. The measurements obtained for pulsed megasonic agitation are compared to that obtained while sonicating the liquid continuously. They are further correlated to experimental data on particle removal efficiency for varying pulse duration, and corresponding cavitation noise measurements. Here, the latter proves to be a suitable and easy-to-do method to identify cleaning regimes beforehand. © 2012 American Institute of Physics.status: publishe
Time-resolved monitoring of cavitation activity in megasonic cleaning systems
The occurrence of acoustic cavitation in the cleaning liquid is a crucial precondition for the performance of megasonic cleaning systems. Hence, a fundamental understanding of the impact of different parameters of the megasonic process on cavitation activity is necessary. A setup capable of synchronously measuring sonoluminescence and acoustic emission originating from acoustically active bubbles is presented. The system also includes a high-speed-stroboscopic Schlieren imaging system to directly visualize the influence of cavitation activity on the Schlieren contrast and resolvable bubbles. This allows a thorough characterization of the mutual interaction of cavitation bubbles with the sound field and with each other. Results obtained during continuous sonication of argon-saturated water at various nominal power densities indicate that acoustic cavitation occurs in a cyclic manner, during which periods of stable and inertial cavitation activity alternate. The occurrence of higher and ultraharmonics in the acoustic emission spectra is characteristic for the stable cavitation state. The inertial cavitation state is characterized by a strong attenuation of the sound field, the explosive growth of bubbles and the occurrence of broadband components in the acoustic spectra. Both states can only be sustained at sufficiently high intensities of the sound field. At lower intensities, their occurrences are limited to short, random bursts. Cleaning activity can be linked to the cavitation activity through the measurement of particle removal on standard 200 mm silicon wafers. It is found that the particle removal efficiency is reduced, when a continuous state of cavitation activity ceases to exist.status: publishe
Invloed van het Belgische vergoedingssysteem voor medische ongevallen op het gedrag van artsen
Study of ultrasound-assisted radio-frequency plasma discharges in n-dodecane
This paper investigates the generation of a stable plasma phase in a liquid hydrocarbon (n-dodecane) by means of ultrasound (US) and radio-frequency (RF) or electromagnetic radiation. It is demonstrated for the first time that ultrasonic aided RF plasma discharges can be generated in a liquid. Plasma discharges are obtained for different gas mixtures at a pressure of 12 kPa and at low ignition powers (100W for RF and 2.4W cm(-2) for US). Direct carbon deposition from the liquid precursor on Cu, Ni, SiO2 and Si substrates has been obtained and no apparent compositional or structural difference among the substrate materials was observed. Characterization of the deposited solid phase revealed an amorphous structure. In addition, structural changes in the liquid precursor after plasma treatment have been analysed. Optical emission spectroscopy (OES) allowed the estimation of several plasma characteristic temperatures. The plasma excitation temperature was estimated to be about 2.3-2.4 eV. The rotational and vibrational temperatures of the discharge in n-dodecane with Ar as a feed gas were 1400K and 6500 K, respectively. In Ar/O-2 plasma, an increased rotational (1630 K) and vibrational temperature (7200 K) were obtained
Enhancement of cavitation activity and particle removal with pulsed high frequency ultrasound and supersaturation
Megasonic cleaning as applied in leading edge semiconductor device manufacturing strongly relies on the
phenomenon of acoustic cavitation. As the occurrence of acoustic cavitation is incorporating a multitude
of interdependent effects, the amount of cavitation activity in the cleaning liquid strongly depends on the
sonication conditions. It is shown that cavitation activity as measured by means of ultraharmonic cavitation
noise can be significantly enhanced when pulsed sonication is applied to a gas supersaturated
liquid under traveling wave conditions. It is demonstrated that this enhancement coincides with a dramatic
increase in particle removal and is therefore of great interest for megasonic cleaning applications.
It is demonstrated that the optimal pulse parameters are determined by the dissolution time of the active
bubbles, whereas the amount of cavitation activity depends on the ratio between pulse-off and pulse-on
time as well as the applied acoustic power. The optimal pulse-off time is independent of the corresponding
pulse-on time but increases significantly with increasing gas concentration. We show that on the
other hand, supersaturation is needed to enable acoustic cavitation at aforementioned conditions, but
has to be kept below values, for which active bubbles cannot dissolve anymore and are therefore lost during
subsequent pulses. For the applicable range of gas contents between 100% and 130% saturation, the
optimal pulse-off time reaches values between 150 and 340 ms, respectively. Full particle removal of
78 nm-diameter silica particles at a power density of 0.67 W/cm2 is obtained for the optimal pulse-off
times. The optimal pulse-off time values are derived from the dissolution time of bubbles with a radius
of 3.3 lm and verified experimentally. The bubble radius used in the calculations corresponds to the linear
resonance size in a 928 kHz sound field, which demonstrates that the recycling of active bubbles is
the main enhancement mechanism. The optimal choice of the pulsing conditions however is constrained
by the trade-off between the effective sonication time and the desire to have a sufficient amount of active
bubbles at lower powers, which might be necessary if very delicate structures have to be cleaned.status: publishe
The value of laparoscopic liver surgery for solid benign hepatic tumors
Background Laparoscopic liver resection (LLR) has gained wide acceptance for various liver resection procedures, mainly for benign diseases. However, only small series have been reported from a few selected centers.
Methods Between January 2001 and January 2006, a total of 629 liver resections were performed at our institution. The indication was solid benign liver tumor in 56 (8.9%) patients. LLR was performed in 20 (35.7%) cases. Data from the LLR group were compared with those from a consecutive control group undergoing open liver surgery (OS) for similar indications in a matched-pair analysis during the same period. The pairs were matched as closely as possible for age, gender, American Society of Anesthesiologists (ASA) score, indication for resection, and type and location of the lesions. The endpoint was to investigate overall morbidity and outcome.
Results All patients but one are alive and well after a mean follow-up of 35 months (range 10-60 months). Conversion laparotomy was required in two out of 20 (10%) cases for uncontrolled bleeding (one requiring temporary hemodialysis). LLR was characterized by faster time to first oral intake and shorter hospital stay compared to OS (p = 0.001 and 0.008, respectively). Incisional hernias (25%) were only recorded in the OS (p = 0.047 vs. LLR). Overall morbidity was 45% in OS versus 20% in LLR (p = 0.3).
Conclusions LLR significantly reduced time to oral intake, hospital stay, and incisional hernias compared to OS. Bleeding is a major risk and should be carefully considered when resecting benign tumors. In the hands of expert surgeons, LLR may become the gold standard for the resection of benign liver tumors located in the anterior and lateral sectors and for minor hepatic resections