Compression coil provides increased lead control in extraction procedures

Aims We investigated a new lead extraction tool (Compression Coil; One-Tie, Cook Medical) in an experimental traction force study. Methods and results On 13 pacemaker leads (Setrox JS53, Biotronik) traction force testing was performed under different configurations. The leads were assigned to three groups: (i) traction force testing without central locking stylet support (n = 5), (ii) traction force testing with the use of a locking stylet (Liberator, Cook Medical) and a proximal ligation suture (n = 4), (iii) traction force testing with the use of a locking stylet and a compression coil (n = 4). The following parameters were obtained for all groups: stress-strain curves, maximal forces, elastic modulus, post-testing lead length and lead elongation. In Groups 2 and 3 retraction of the locking stylet within the lead was measured [lead tip-locking stylet distance (LTLSD)]. Maximal forces for the three groups were: (i) 28.3 ± 0.3 N; (ii) 30.6 ± 3.0 N; (iii) 31.6 ± 2.9 N (1 vs. 2, P = 0.13; 1 vs. 3, P = 0.04; 2 vs. 3, P = 0.65). Elastic modulus was (i) 22.8 ± 0.1 MPa; (ii) 2830.8 ± 351.1 MPa; (iii) 2447.0 ± 510.5 MPa (1 vs. 2, P < 0.01; 1 vs. 3, P < 0.01; 2 vs. 3, P = 0.26). Mean LTLSD in Group 2 was 19.8 ± 3.2 cm and was 13.8 ± 1.7 cm in Group 3 (P = 0.02). The ratio of LTLSD/post-testing lead length was 0.37 ± 0.03 for Group 2 and 0.24 ± 0.03 for Group 3 (P < 0.01). Conclusion The application of a compression coil leads to an increased lead control expressed by less retraction of the locking stylet within the lead. This enables improved central support of extraction sheaths in the case of challenging extraction procedure

Flame Synthesis of Complex Fluoride-Based Nanoparticles as Upconversion Phosphors

Recent improvements in precursor chemistry, reactor geometry and run conditions extend the manufacturing capability of traditional flame aerosol synthesis of oxide nanoparticles to metals, alloys and inorganic complex salts. As an example of a demanding composition, we demonstrate here the one-step flame synthesis of nanoparticles of a 4-element non-oxide phosphor for upconversion applications. The phosphors are characterized in terms of emission capability, phase purity and thermal phase evolution. The preparation of flame-made beta-NaYF4 with dopants of Yb, Tm or Yb, Er furthermore illustrates the now available nanoparticle synthesis tool boxes based on modified flamespray synthesis from our laboratories at ETH Zurich. Since scaling concepts for flame synthesis, including large-scale filtration and powder handling, have become available commercially, the development of industrial applications of complex nanoparticles of metals, alloys or most other thermally stable, inorganic compounds can now be considered a feasible alternative to traditional top-down manufacturing or liquid-intense wet chemistry

Influence of impulse intensive magnetic fields upon thermomechanical processes and structural-phase variations in metals and alloys at heavy skin-effect

The purpose of the work is to investigate perculiarities of the interaction of intensive impulse magnetic fields with a submegaersted range (up to 1-2 Me) with metals and alloys in the conditions of the heavy skin-effect, to study structuralphase variations. In the result of the research relationships of stress forces induced by Lorentz forces and Joule heat emission, and their relation with the Gruneisen constant, as well as asymptotics of non-linear effects of the current density localization have been determined. A model of the interaction of impulse intensive magnetic fields with metals and of the formation of structural-phase variations in them at the heavy skin-effect conditions has been offered.The formation of zones of thermal and mechanical influence has been discovered and proved in the result of the researchAvailable from VNTIC / VNTIC - Scientific & Technical Information Centre of RussiaSIGLERURussian Federatio

Compression coil provides increased lead control in extraction procedures

ISSN:1099-5129ISSN:1532-209

Compression coil provides increased lead control in extraction procedures

AIMS: We investigated a new lead extraction tool (Compression Coil; One-Tie, Cook Medical) in an experimental traction force study. METHODS AND RESULTS: On 13 pacemaker leads (Setrox JS53, Biotronik) traction force testing was performed under different configurations. The leads were assigned to three groups: (i) traction force testing without central locking stylet support (n = 5), (ii) traction force testing with the use of a locking stylet (Liberator, Cook Medical) and a proximal ligation suture (n = 4), (iii) traction force testing with the use of a locking stylet and a compression coil (n = 4). The following parameters were obtained for all groups: stress-strain curves, maximal forces, elastic modulus, post-testing lead length and lead elongation. In Groups 2 and 3 retraction of the locking stylet within the lead was measured [lead tip-locking stylet distance (LTLSD)]. Maximal forces for the three groups were: (i) 28.3 ± 0.3 N; (ii) 30.6 ± 3.0 N; (iii) 31.6 ± 2.9 N (1 vs. 2, P = 0.13; 1 vs. 3, P = 0.04; 2 vs. 3, P = 0.65). Elastic modulus was (i) 22.8 ± 0.1 MPa; (ii) 2830.8 ± 351.1 MPa; (iii) 2447.0 ± 510.5 MPa (1 vs. 2, P < 0.01; 1 vs. 3, P < 0.01; 2 vs. 3, P = 0.26). Mean LTLSD in Group 2 was 19.8 ± 3.2 cm and was 13.8 ± 1.7 cm in Group 3 (P = 0.02). The ratio of LTLSD/post-testing lead length was 0.37 ± 0.03 for Group 2 and 0.24 ± 0.03 for Group 3 (P < 0.01). CONCLUSION: The application of a compression coil leads to an increased lead control expressed by less retraction of the locking stylet within the lead. This enables improved central support of extraction sheaths in the case of challenging extraction procedures

Purification of NaYF₄‑Based Upconversion Phosphors

Applications of upconversion phosphors have grown extensively in number during the past decade. Hexagonal sodium yttrium fluoride (β-NaYF₄) is known to be one of the best host lattices for upconversion materials. We developed a novel technique for transforming cubic sodium yttrium fluoride (α-NaYF₄) phosphors into the hexagonal modification and remove oxygen impurities that hinder the upconversion luminescence. We transformed cubic α-NaYF₄ nanoparticles from flame-spray synthesis with a particle size less than 50 nm into more efficient β-NaYF₄ phosphors. The application of SnF₂ and ZnF₂ as oxygen scavengers allowed the formation of the pure hexagonal phase and improved the upconversion luminescence intensity. The developed process utilizes no free HF gas in the production and does not contaminate the upconversion phosphors with scavenger material. The treatment increases the particle size to between approximately 500 nm and 1 μm. Upconversion luminescence spectra revealed the characteristic blue Tm³⁺ and green Er³⁺ emissions of β-NaYF₄: Yb,Tm and Yb,Er, respectively

Inflammatory Response of Lung Macrophages and Epithelial Cells after Exposure to Redox Active Nanoparticles: Effect of Solubility and Antioxidant Treatment

The effects of an exposure to three mass-produced metal oxide nanoparticles–similar in size and specific surface area but different in redox activity and solubility–were studied in rat alveolar macrophages (MAC) and epithelial cells (AEC). We hypothesized that the cell response depends on the particle redox activity and solubility determining the amount of reactive oxygen species formation (ROS) and subsequent inflammatory response. MAC and AEC were exposed to different amounts of Mn₃O₄ (soluble, redox-active), CeO₂ (insoluble, redox-active), and TiO₂ (insoluble, redox-inert) up to 24 h. Viability and inflammatory response were monitored with and without coincubation of a free-radical scavenger (trolox). In MAC elevated ROS levels, decreased metabolic activity and attenuated inflammatory mediator secretion were observed in response to Mn₃O₄. Addition of trolox partially resolved these changes. In AEC, decreased metabolic activity and an attenuated inflammatory mediator secretion were found in response to CeO₂ exposure without increased production of ROS, thus not sensitive to trolox administration. Interestingly, highly redox-active soluble particles did not provoke an inflammatory response. The data reveal that target and effector cells of the lung react in different ways to particle exposure making a prediction of the response depending on redox activity and intracellular solubility difficult

Use of NIR light and upconversion phosphors in light-curable polymers

OBJECTIVE: Light-curable polymers are commonly used in restorative surgery, prosthodontics and surgical procedures. Despite the fact of wide application, there are clinical problems due to limitations of blue light penetration: application is restricted to defects exposed to the light source, layered filling of defect is required. METHODS: Combining photo-activation and up conversion allows efficient polymer hardening by deep penetrating near-infrared (NIR) light. The prerequisite 450 nm blue light to polymerize dental resins could be achieved by filler particles, which absorb the incident NIR irradiation and convert it into visible light. RESULTS: The on spot generated blue light results in uniform polymer hardening. Composite samples of 5mm thickness were cured two times faster than pure polymer cured by blue light (30 and 60 s, respectively). Overall degree of monomer conversion resulted in higher values of more than 40%. The enhanced transmission of NIR light was confirmed by optical analysis of dentin and enamel. The NIR transmittance surge in the 800-1200 nm window could improve sealing of complex and deep caries lesions. SIGNIFICANCE: We demonstrate faster curing and an improved degree of polymerization by using upconversion filler particles as multiple light emission centers. This study represents an alternative approach in curing dental resins by NIR source