914 research outputs found
Quantum noise of non-ideal Sagnac speed meter interferometer with asymmetries
The speed meter concept has been identified as a technique that can
potentially provide laser-interferometric measurements at a sensitivity level
which surpasses the Standard Quantum Limit (SQL) over a broad frequency range.
As with other sub-SQL measurement techniques, losses play a central role in
speed meter interferometers and they ultimately determine the quantum noise
limited sensitivity that can be achieved. So far in the literature, the quantum
noise limited sensitivity has only been derived for lossless or lossy cases
using certain approximations (for instance that the arm cavity round trip loss
is small compared to the arm cavity mirror transmission). In this article we
present a generalised, analytical treatment of losses in speed meters that
allows accurate calculation of the quantum noise limited sensitivity of Sagnac
speed meters with arm cavities. In addition, our analysis allows us to take
into account potential imperfections in the interferometer such as an
asymmetric beam splitter or differences of the reflectivities of the two arm
cavity input mirrors. Finally,we use the examples of the proof-of-concept
Sagnac speed meter currently under construction in Glasgow and a potential
implementation of a Sagnac speed meter in the Einstein Telescope (ET) to
illustrate how our findings affect Sagnac speed meters with meter- and
kilometre-long baselines.Comment: 22 pages, 8 figures, 1 table, (minor corrections and changes made to
text and figures in version 2
Quantum-Dense Metrology
Quantum metrology utilizes entanglement for improving the sensitivity of
measurements. Up to now the focus has been on the measurement of just one out
of two non-commuting observables. Here we demonstrate a laser interferometer
that provides information about two non-commuting observables, with
uncertainties below that of the meter's quantum ground state. Our experiment is
a proof-of-principle of quantum dense metrology, and uses the additional
information to distinguish between the actual phase signal and a parasitic
signal due to scattered and frequency shifted photons. Our approach can be
readily applied to improve squeezed-light enhanced gravitational-wave detectors
at non-quantum noise limited detection frequencies in terms of a sub shot-noise
veto-channel.Comment: 5 pages, 3 figures; includes supplementary material
Design of a speed meter interferometer proof-of-principle experiment
The second generation of large scale interferometric gravitational wave
detectors will be limited by quantum noise over a wide frequency range in their
detection band. Further sensitivity improvements for future upgrades or new
detectors beyond the second generation motivate the development of measurement
schemes to mitigate the impact of quantum noise in these instruments. Two
strands of development are being pursued to reach this goal, focusing both on
modifications of the well-established Michelson detector configuration and
development of different detector topologies. In this paper, we present the
design of the world's first Sagnac speed meter interferometer which is
currently being constructed at the University of Glasgow. With this
proof-of-principle experiment we aim to demonstrate the theoretically predicted
lower quantum noise in a Sagnac interferometer compared to an equivalent
Michelson interferometer, to qualify Sagnac speed meters for further research
towards an implementation in a future generation large scale gravitational wave
detector, such as the planned Einstein Telescope observatory.Comment: Revised version: 16 pages, 6 figure
Measurements in two bases are sufficient for certifying high-dimensional entanglement
High-dimensional encoding of quantum information provides a promising method
of transcending current limitations in quantum communication. One of the
central challenges in the pursuit of such an approach is the certification of
high-dimensional entanglement. In particular, it is desirable to do so without
resorting to inefficient full state tomography. Here, we show how carefully
constructed measurements in two bases (one of which is not orthonormal) can be
used to faithfully and efficiently certify bipartite high-dimensional states
and their entanglement for any physical platform. To showcase the practicality
of this approach under realistic conditions, we put it to the test for photons
entangled in their orbital angular momentum. In our experimental setup, we are
able to verify 9-dimensional entanglement for a pair of photons on a
11-dimensional subspace each, at present the highest amount certified without
any assumptions on the state.Comment: 11+14 pages, 2+7 figure
A Cryogenic Silicon Interferometer for Gravitational-wave Detection
The detection of gravitational waves from compact binary mergers by LIGO has opened the era of gravitational wave astronomy, revealing a previously hidden side of the cosmos. To maximize the reach of the existing LIGO observatory facilities, we have designed a new instrument that will have 5 times the range of Advanced LIGO, or greater than 100 times the event rate. Observations with this new instrument will make possible dramatic steps toward understanding the physics of the nearby universe, as well as observing the universe out to cosmological distances by the detection of binary black hole coalescences. This article presents the instrument design and a quantitative analysis of the anticipated noise floor
Substrate-transferred GaAs/AlGaAs crystalline coatings for gravitational-wave detectors: A review of the state of the art
In this Perspective we summarize the status of technological development for
large-area and low-noise substrate-transferred GaAs/AlGaAs (AlGaAs) crystalline
coatings for interferometric gravitational-wave (GW) detectors. These topics
were originally presented in a workshop{\dag} bringing together members of the
GW community from the laser interferometer gravitational-wave observatory
(LIGO), Virgo, and KAGRA collaborations, along with scientists from the
precision optical metrology community, and industry partners with extensive
expertise in the manufacturing of said coatings. AlGaAs-based crystalline
coatings present the possibility of GW observatories having significantly
greater range than current systems employing ion-beam sputtered mirrors. Given
the low thermal noise of AlGaAs at room temperature, GW detectors could realize
these significant sensitivity gains, while potentially avoiding cryogenic
operation. However, the development of large-area AlGaAs coatings presents
unique challenges. Herein, we describe recent research and development efforts
relevant to crystalline coatings, covering characterization efforts on novel
noise processes, as well as optical metrology on large-area (~10 cm diameter)
mirrors. We further explore options to expand the maximum coating diameter to
20 cm and beyond, forging a path to produce low-noise AlGaAs mirrors amenable
to future GW detector upgrades, while noting the unique requirements and
prospective experimental testbeds for these novel materials.Comment: 13pages, 3 figure
Control of a velocity-sensitive audio-band quantum non-demolition interferometer
The Sagnac speed meter interferometer topology can potentially provide enhanced sensitivity to gravitational waves in the audio-band compared to equivalent Michelson interferometers. A challenge with the Sagnac speed meter interferometer arises from the intrinsic lack of sensitivity at low frequencies where the velocity-proportional signal is smaller than the noise associated with the sensing of the signal. Using as an example the on-going proof-of-concept Sagnac speed meter experiment in Glasgow, we quantify the problem and present a solution involving the extraction of a small displacement-proportional signal. This displacement signal can be combined with the existing velocity signal to enhance low frequency sensitivity, and we derive optimal filters to accomplish this for different signal strengths. We show that the extraction of the displacement signal for low frequency control purposes can be performed without reducing significantly the quantum non-demolition character of this type of interferometer
- …