54 research outputs found
Iskustva u gospodarenju otpadom koji sadrži azbest u Republici Hrvatskoj
This paper presents an overview of asbestos production data worldwide and in the Republic of Croatia in the period 2000 to 2018 as well as the asbestos consumption data from 1995 to 2010. The results of asbestos waste collection from 1995 to 2018 have been analyzed and the experiences of the Republic of Croatia in the management of asbestos-containing waste have been described in accordance with the applicable national legislation. Although asbestos does not pose a risk if its products do not become damaged by fracture, or during transportation or decomposition, it poses a potential danger to human health. In today\u27s world, every five minutes someone dies from a disease related to asbestos, such as asbestosis and cancer caused by asbestos. For these reasons, most countries adopted the obligation to execute a series of measures to stop using asbestos in 1999, while at the same time in the Republic of Croatia still imported about 4000 tonnes of asbestos per year. In 2006, the Republic of Croatia banned the production, transport, and use of asbestos, and the asbestos objects whose lifetime expired ended up in municipal waste, causing the need for special regulations in order to arrange the management of asbestos containing waste. Over the past ten years, the Republic of Croatia has developed an asbestos waste management system. Regardless of the success of its application, certain improvements are needed, as data on the amounts of reported construction waste, and thus the part containing asbestos, do not coincide with economic and other indicators for the construction sector.U radu je dan pregled podataka o proizvodnji azbesta u svijetu i Republici Hrvatskoj u razdoblju od 2000. do 2017. godine te njegovoj potrošnji, od 1995. do 2010. godine. Analizirani su rezultati sakupljanja otpada koji sadrži azbest od 1995. do 2018. godine i opisana su iskustva Republike Hrvatske u gospodarenju otpadom koji sadrži azbest u skladu s važećom nacionalnom legislativom. Iako azbest ne predstavlja rizik sve dok se njegovi proizvodi ne oštete prilikom loma, tijekom transporta ili raspadanja, on predstavlja potencijalnu opasnost za ljudsko zdravlje. Danas u svijetu svakih pet minuta netko umre od bolesti povezane s azbestom, poput azbestoze i karcinoma uzrokovanog azbestom. Iz ovih razloga je većina država u svijetu još 1999. godine prihvatila obvezu izvršenja niza mjera za prestanak uporabe azbesta, dok se istovremeno u Republiku Hrvatsku još uvijek uvozilo oko 4000 tona azbesta na godinu. Republika Hrvatska je tek 2006. godine zabranila proizvodnju, promet i upotrebu azbesta, a predmeti od azbesta kojima je vijek trajanja istekao, završavali su u komunalnom otpadu, zbog čega se nametnula potreba za donošenjem posebnih propisa kojima je uređeno gospodarenje otpadom koji sadrži azbest. U proteklih desetak godina u Republici Hrvatskoj je razvijan sustav gospodarenja otpadom koji sadrži azbest. Bez obzira na uspješnost njegove primjene, nužna su određena poboljšanja, jer se podaci o količinama prijavljenog nastalog građevnog otpada, a s time i onog dijela koji sadrži azbest, ne podudaraju s gospodarskim i drugim pokazateljima za građevni sektor
Natural Radioactivity in Steel Slag Aggregate
Present day steelmaking slags are being successfully used as a high quality mineral aggregate for the building industry. With this, it is of vital importance to be familiar with the technical significance of the secondary application of steel slag, because some steel slag might contain increased concentration of substances harmful to human health. In terms of steel slag impact on the environment, radionuclides are the least researched of all pollutants emitted from the metallurgical processes.
This paper presents the results of radiochemical testing of steel slag and steel slag aggregates for the purpose of its use in the production of construction material.
Obtained results of measurements show that 40K, 226Ra and 232Th in all examined steel slag samples have the activity concentration from 45.3 to 62.9Bqkg-1, 15.2 to 21.4Bqkg-1 and 12.9 to 15.4Bqkg-1, respectively. Results of measurements of radionuclide activity concentrations of 226Ra, 232Th and 40K in slag aggregates show similar values for all radionuclides ranges as follows: 40K from 14.1 to 23.3Bqkg-1; 232Th from 8.6 to 14.4Bqkg-1 and 226Ra from 14.8 to 26.8Bqkg-1. Activities index (I1, I2, I3) of 226Ra, 232Th and 40K were compared with values recommended by Croatian legislation. Radium equivalent concentrations (Raeq) of 226Ra, 232Th and 40K for examined steel slag and steel slag aggregates are harmounious with the results presented by other authors for the same by-product.
The testing has been conducted on steel slag created during the production of carbon steel by electric arc furnace in Steel Mill of CMC Sisak, Croatia
Monitoring of 137Cs in electric arc furnace steel making process
This article presents the results of Cs-137 and other radionuclide monitoring in EAF steel-making process in the Croatian CMC Sisak Steel Mill. The presence of Cs-137 and natural isotopes K-40, Th-232, Ra-226 and U-238 was established. Investigations on the occurrence of the isotope cesium, as well as natural isotopes and their distribution in waste from the process of carbon steel production by EAF have been conducted. Detection of artificial isotope cesium in EAF dust indicates that it might originate from steel scrap or from the residue of the material that was used in the technological process, thus deserving special attention
Radionuclides in steel slag intended for road construction
The objective of this study was to describe the radiochemical characteristics of electric arc furnace (EAF) slag from Croatian EAF black steel slags, generated from carbon steel production process in CMC Sisak d.o.o., and steel mill in Split in order to enhance the understanding of possibilities for their use in road construction. This article presents the results of radionuclide in electric arc furnace steel slag. The presence of natural isotopes 40 K, 232 Th ( 228 Ra), 226 Ra and 238 U was established. The measured activity in slag natural isotopes lies within the Croatian legally permitted limits
Żużel stalowniczy, jako zamiennik kruszyw naturalnych stosowanych w mieszance asfaltowej
Even though electric arc furnace (EAF) steel slag has been classified as non-hazardous waste by its physical and chemical characteristics, and is possible to be disposed of at provided disposal sites without danger to the environment, this is rarely applied, because the permanent disposal of steel slag is highly expensive and requires a great area, and the valuable ingredients of steel slag are lost forever. The purpose of this paper was to improve the management of this type of non-hazardous industrial waste. Alongside with reducing the area intended for its disposal and increasing the technological benefit of re-using waste material, the final results of these tests should ensure the economic profit of producers, as well as achieve a sociological-ecological benefit due to the reduction of expenditure of natural mineral aggregates, simultaneously enhancing the sustainable development policies in metallurgy.
A part of this research examines the possibilities of using EAF slag in other industries, with a special focus on using the slag as substitute for natural mineral aggregates in the production of asphalt mixtures in road construction. The paper presents the results of testing physical and mechanical properties of EAF slag coming from the regular production of unalloyed carbon steel in CMC Sisak, Croatia with the application of prior processing encompassing cooling the liquid slag by air, as well as quenching by water, grinding, magnetic separation, fragmentation and granulometric fractioning for the purpose of its application in technologies of producing asphalt mixtures. Comparison of test results between specimens of water- and air-cooled EAF slag and natural aggregates used in asphalt mixtures on highways and other top-class traffic load roads has demonstrated that the examined slag has qually good physical and mechanical properties, while it is significantly better in terms of resistance to polishing.Pomimo faktu, że żużel z elektrycznych pieców łukowych (EAF) do wytopu stali został sklasyfikowany jako odpad inny niż niebezpieczny w oparciu o charakterystykę fizyczną i chemiczną, i możliwe jest jego składowanie na odpowiednich składowiskach bez zagrożenia dla środowiska naturalnego, jest to rzadko stosowane, ponieważ stałe składowanie żużla jest bardzo kosztowne i wymaga dużych powierzchni, a cenne składniki żużla są tracone na zawsze. Celem pracy była poprawa zagospodarowania tego rodzaju odpadów przemysłowych. Wraz ze zmniejszeniem powierzchni przeznaczonej na składowanie żużla i zwiększeniem korzyści technologicznych z ponownego wykorzystania odpadów, ostateczne wyniki tych badań powinny zapewnić osiągnięcie zysku producentów, jak również osiągnięcia korzyści społeczno-ekologicznych ze względu na zmniejszenie zużycia naturalnych kruszyw mineralnych, a jednocześnie wzmocnienie polityki zrównoważonego rozwoju w hutnictwie.
Część tych badań analizuje możliwości wykorzystania żużla EAF w innych gałęziach przemysłu, ze szczególnym naciskiem na wykorzystanie żużla jako substytut naturalnych kruszyw mineralnych w produkcji mieszanek mineralno-asfaltowych w budownictwie drogowym. W artykule przedstawiono wyniki badań fizycznych i mechanicznych właściwości żużla EAF pochodzącego z regularnej produkcji stali węglowej niestopowej w CMC Sisak, Chorwacja z zastosowaniem uprzedniego przetworzenia obejmującego chłodzenia ciekłego żużla w powietrzu, jak również chłodzenia wodą, rozdrabniania, separacji magnetycznej, rozdrobnienia i frakcjonowania w celu jego stsowania w technologii produkcji mieszanek mineralno-asfaltowych. Porównanie wyników badań próbek żużla chłodzonego wodą i chłodzonego powietrzem oraz kruszyw naturalnych stosowanych w mieszankach asfaltowych na autostradach i innych drogach o dużym obciążeniu ruchem wykazało, że badany żużel ma równie dobre właściwości fizyczne i mechaniczne, a jednocześnie jest znacznie lepszy pod względem odporności na ścieranie
Żużel stalowniczy, jako zamiennik kruszyw naturalnych stosowanych w mieszance asfaltowej
Even though electric arc furnace (EAF) steel slag has been classified as non-hazardous waste by its physical and chemical characteristics, and is possible to be disposed of at provided disposal sites without danger to the environment, this is rarely applied, because the permanent disposal of steel slag is highly expensive and requires a great area, and the valuable ingredients of steel slag are lost forever. The purpose of this paper was to improve the management of this type of non-hazardous industrial waste. Alongside with reducing the area intended for its disposal and increasing the technological benefit of re-using waste material, the final results of these tests should ensure the economic profit of producers, as well as achieve a sociological-ecological benefit due to the reduction of expenditure of natural mineral aggregates, simultaneously enhancing the sustainable development policies in metallurgy.
A part of this research examines the possibilities of using EAF slag in other industries, with a special focus on using the slag as substitute for natural mineral aggregates in the production of asphalt mixtures in road construction. The paper presents the results of testing physical and mechanical properties of EAF slag coming from the regular production of unalloyed carbon steel in CMC Sisak, Croatia with the application of prior processing encompassing cooling the liquid slag by air, as well as quenching by water, grinding, magnetic separation, fragmentation and granulometric fractioning for the purpose of its application in technologies of producing asphalt mixtures. Comparison of test results between specimens of water- and air-cooled EAF slag and natural aggregates used in asphalt mixtures on highways and other top-class traffic load roads has demonstrated that the examined slag has qually good physical and mechanical properties, while it is significantly better in terms of resistance to polishing.Pomimo faktu, że żużel z elektrycznych pieców łukowych (EAF) do wytopu stali został sklasyfikowany jako odpad inny niż niebezpieczny w oparciu o charakterystykę fizyczną i chemiczną, i możliwe jest jego składowanie na odpowiednich składowiskach bez zagrożenia dla środowiska naturalnego, jest to rzadko stosowane, ponieważ stałe składowanie żużla jest bardzo kosztowne i wymaga dużych powierzchni, a cenne składniki żużla są tracone na zawsze. Celem pracy była poprawa zagospodarowania tego rodzaju odpadów przemysłowych. Wraz ze zmniejszeniem powierzchni przeznaczonej na składowanie żużla i zwiększeniem korzyści technologicznych z ponownego wykorzystania odpadów, ostateczne wyniki tych badań powinny zapewnić osiągnięcie zysku producentów, jak również osiągnięcia korzyści społeczno-ekologicznych ze względu na zmniejszenie zużycia naturalnych kruszyw mineralnych, a jednocześnie wzmocnienie polityki zrównoważonego rozwoju w hutnictwie.
Część tych badań analizuje możliwości wykorzystania żużla EAF w innych gałęziach przemysłu, ze szczególnym naciskiem na wykorzystanie żużla jako substytut naturalnych kruszyw mineralnych w produkcji mieszanek mineralno-asfaltowych w budownictwie drogowym. W artykule przedstawiono wyniki badań fizycznych i mechanicznych właściwości żużla EAF pochodzącego z regularnej produkcji stali węglowej niestopowej w CMC Sisak, Chorwacja z zastosowaniem uprzedniego przetworzenia obejmującego chłodzenia ciekłego żużla w powietrzu, jak również chłodzenia wodą, rozdrabniania, separacji magnetycznej, rozdrobnienia i frakcjonowania w celu jego stsowania w technologii produkcji mieszanek mineralno-asfaltowych. Porównanie wyników badań próbek żużla chłodzonego wodą i chłodzonego powietrzem oraz kruszyw naturalnych stosowanych w mieszankach asfaltowych na autostradach i innych drogach o dużym obciążeniu ruchem wykazało, że badany żużel ma równie dobre właściwości fizyczne i mechaniczne, a jednocześnie jest znacznie lepszy pod względem odporności na ścieranie
Onečišćenje tla kao posljedica odlaganja neopasnog otpada iz procesa proizvodnje čelika
Investigated was the soil at an old metallurgical landfill site of CMC Sisak Ltd. which has been exposed to the direct influence of metallurgical nonhazardous waste for many years. Concentrations of heavy metals (Cd, Cr, Cu, Hg Ni, Pb, and Zn) after extraction in aqua regia were determined. Heavy metal concentrations, except Hg, were determined by inductively coupled optical emission spectrometry and inductively coupled plasma mass spectrometry (ICP-OES, ICP-MS). Concentration of Hg was determined by atomic absorption spectrometry.
Our objective was to assess the pollution level according to the potentially unacceptable risk limit levels for industrially used soil prescribed by the Croatian Soil Monitoring Program, and levels permitted by some EU member countries.
The results of heavy metal concentrations in composite samples of landfill soil were also compared with the results obtained from the reference sample taken in the nearby park, outside the battery limits. The obtained results qualify the analysed landfill soil as contaminated with Cu according to the legislation of all observed EU countries, with Cd according to the legislation of Italy, Poland, and Belgium (Wallonia), and with Cr according to the legislation of Finland and Poland. To allow future use of the landfill certain measures of soil treatment will be necessary.Ispitano je tlo starog metalurškog odlagališta tvornice CMC Sisak d. o. o., koje je dugi niz godina bilo izloženo različitim utjecajima neštetnog metalurškog otpada. Sadržaj teških metala Cd, Cr, Cu, Hg, Ni, Pb i Zn u tlu određen je u uzorcima tla nakon njihove ekstrakcije metala zlatotopkom. Određivanje sadržaja svih navedenih metala osim žive provedeno je metodom optičke emisijske spektrometrije induktivno vezane plazme (ICP-OES), dok je sadržaj žive određen spektrometrijom atomske apsorpcije (AAS) primjenom hidridne tehnike.
Da bi se procijenila razina onečišćenja tla, napravljena je usporedba rezultata sadržaja teških metala u analiziranim uzorcima tla s propisanim vrijednostima za potencijalno neprihvatljiv rizik za tlo upotrebljavano u industriji prema Programu trajnog motrenja tla Republike Hrvatske kao i prema propisanim vrijednostima u nekim zemljama EU. Rezultati određivanja sadržaja teških metala u kompozitnim uzorcima tla uspoređivani su s njihovim koncentracijama u referentnom uzorku tla uzetom s prostora obližnjeg parka, izvan tvorničkog kruga. Dobiveni rezultati svrstavaju analizirano tlo s odlagališta kontaminiranim prema propisima svih promatranih zemalja EU-a s bakrom, Italije i Poljske s kadmijem i Belgije (Valonija), Finske i Poljske s kromom. Za buduću upotrebu tla u istu svrhu moraju se poduzeti odgovarajuće mjere
PCDDs/Fs Pollution from Metallurgical Processes in the Town of Sisak, Croatia
In order to calculate the emission of polychlorinated dibenzo- p-dioxins and polychlorinated ibenzofurans from metallurgical processes located in the town of Sisak, Croatia, this research has built on experiences from developed countries, where the emission factor values from individual etallurgical processes have been taken from the reference data and used for the estimate of the emission of these pollutions in the European countries. The calculation of the emission polychlorinated dibenzo- p- ioxins and polychlorinated dibenzofurans from metallurgical processes located in the town of Sisak took into account annual outputs of sinter, pig iron, steel blooms and steel billets, as well as steel casts.
The metallurgical processes installed in the town of Sisak between 1950 and 2010 emitted from QI- TEQ =17 mg a-1 PCDDs/Fs in 2001 to QI-T EQ =5823 mg a-1 in 1989, depending on the activity of these processes. Within the observed period, the largest source of PCDDs/Fs emission was the iron ore sintering plant. Within the observed timeframe, the town of Sisak did not experience any excessive air, soil or water pollution by polychlorinated dibenzo- p-dioxins and polychlorinated dibenzofurans from the local metallurgical processes.W celu obliczenia emisji wielochlorowych dibenzo-[1,4]-dioksyn (PCDD) i wielochlorowych dibenzofuranów (PCDF) z
technologii metalurgicznych w miejscowosci Sisak, Chorwacja, badaniaprzedstawione w tej pracy oparte zostały nadoswiadczeniach
z krajów rozwinietych, gdzie wartosci wskaznika emisji z poszczególnych technologii metalurgicznych, zostały wziete
z danych referencyjnych i uzyte w celu oszacowania emisji tych zanieczyszczen w krajach europejskich. W obliczeniach emisji
wielochlorowych dibenzo-[1,4]-dioksyn i wielochlorowych dibenzofuranów z technologii metalurgicznych w miejscowosci
Sisak wzieto pod uwage roczna produkcje spieku, surówki i odlewów.
Technologie metalurgiczne zainstalowane w miescie Sisak pomiedzy 1950 a 2010 rokiem emitowały od QI-TEQ =
17 mg a-1 PCDD/PCDF w 2001 r. do QI-TEQ = 5823 mg a-1 w 1989 roku, w zaleznosci od aktywnosci tych procesów.
W obserwowanym okresie, najwiekszym zródłem emisji PCDD/PCDF było spiekanie rudy zelaza. W obserwowanym czasie,
miasto Sisak nie odczuwało nadmierne zanieczyszczenia powietrza, gleby lub wody przez polichlorowane dibenzo-p-dioksyny
i polichlorowanych dibenzofuranów z lokalnych technologii metalurgicznych
Characterization of Ladle Furnace Slag from Carbon Steel Production as a Potential Adsorbent
A promising type of steel slag for applications is the ladle furnace (LF) slag, which is also known as the basic slag, the reducing slag, the white slag, and the secondary refining slag. The LF slag is a byproduct from further refining molten steel after coming out of a basic oxygen furnace (BOF) or an electric arc furnace (EAF). The use of the LF slag in further applications requires knowledge of its characteristics. The LF slag characterization in this paper has been performed using the following analytical methods: chemical analysis by energy dispersive spectrometry (EDS), mineralogical composition by X-ray diffraction (XRD), surface area properties by the Brunauer-Emmett-Teller (BET) and the Barrett-Joyner-Halenda (BJH) methods, surface chemistry by infrared absorption (FTIR) spectroscopy, and morphological analysis by scanning electron microscopy (SEM). The results showed that the main compounds are calcium, silicon, magnesium, and aluminium oxides, and calcium silicates under their various allotropic forms are the major compounds in the LF slag. Surface area properties have shown that the LF slag is a mesoporous material with relatively great BET surface area. The ladle furnace slag is a nonhazardous industrial waste because the ecotoxicity evaluation by its eluate has shown that the LF slag does not contain constituents which might in any way affect the environment harmfully
- …