Biological saline produced water treatment, a sustainable process towards lipids production

Oil and gas industry is responsible for the generation of large volumes of oil-contaminated wastewaters, such as saline produced water (PW), that without proper treatment can cause environmental contamination. Alcanivorax borkumensis SK2 is a biosurfactant producer capable of degrading and converting hydrocarbons into bacterial lipids under nutrient limiting conditions (e.g. nitrogen and/or oxygen). Recently, the industrial interest in biosurfactants and bacterial lipids for biotechnological applications (e.g. bioremediation or biofuels production) is increasing. Pursuing the interest of treating and simultaneously valorizing PW, a sequencing batch airlift reactor (SBAR) strategy consisting of sequential cycles of feast and famine stages was developed. A. borkumensis SK2 was used as bioreactor inoculum and the effect of cycle duration, total petroleum hydrocarbon to nitrogen ratio (TPH/N) and dissolved oxygen (DO) concentration (7-8 mg L-1 and 2-3 mg L-1 (famine and feast stage); and 7-8/1-2 mg L-1 (famine/feast stage)) were investigated. The system provided an efficient PW treatment, achieving TPH removal efficiencies in a narrow range from 90 ± 2.1 to 96 ± 1.8 %. Intracellular lipid production increased from 0.48 to 0.74 g g-1 of cellular dry weight (CDW) with the application of higher feast stage duration and lower TPH/N ratios suggesting that nitrogen availability is the most relevant factor to promote accumulation. Under 2-3 mg L-1 and 7-8/1-2 mg L-1 of oxygen, lipid accumulation dropped to 0.50 g g-1 of CDW. Intracellular lipid profile changed according to the DO concentration. Triacylglycerols (TAG) and wax esters (WE) were accumulated under maximum and limiting DO concentrations, while polyhydroxyalkanoates (PHA) accumulation was triggered by the application of alternated DO conditions, indicating that the type of intracellular compound can be selected by manipulating the oxygen concentration in the SBAR. Extracellular lipid production (TAG and WE) was not significantly affected by none of the operational conditions applied (0.06 g L-1). Moreover, the production of a cell-bound and an extracellular glycolipid biosurfactant capable of reducing the medium surface tension from 65 to approximately 41 mN m-1 was observed. The proposed strategy showed that biological PW treatment in a SBAR can be a sustainable process through the production of added-value compounds contributing to a circular economy model.This research was supported by the Portuguese Foundation for Science and Technology (FCT I.P.) and European Regional Development Fund (ERDF) under the scope of project SaltOil+ (POCI-01- 0145- FEDER-030180) (Portugal 2020, COMPETE 2020); Rita M. Silva PhD grant (SFRH/BD/116154/2016) was funded by FCT.info:eu-repo/semantics/publishedVersio

Skin byproducts of reinhardtius hippoglossoides (Greenland Halibut) as ecosustainable source of marine collagen

Collagen is a ubiquitous protein present in the extracellular matrix of all major metazoan animals, with approximately 28 different human collagen types described in the literature, each with unique physicochemical properties. Collagens found broad application in the cosmeceutical, pharmaceutical, and biomedical fields and can be isolated from environmentally sustainable sources such as marine byproducts, which are abundant in the fish processing industry and are highly appealing low-cost sources. In this study, marine collagen was isolated from the skins of Greenland halibut (Reinhardtius hippoglossoides), an unexplored byproduct from fish processing plants, using three different collagen extraction methods, due to the use of distinct salting-out methods using a solution of 2.6 M NaCl + 0.05 M Tris-HCl pH = 7.5, (method I); a combination of 0.7 M NaCl followed by a solution of 2.3 M NaCl + 0.05 M Tris-HCl pH = 7.5 (method II); and one method using only 0.9 M NaCl (method III), yielding COLRp_I, COLRp_II, and COLRp_III collagens. These extracted type I collagens were produced with a yield of around 2 and 4% and characterized regarding the physicochemical properties, considering possible biotechnological applications. This work evidenced that the typical triple helix structure conformation was preserved in all extraction methods, but influenced the thermal behavior, intrinsic morphology, and moisture capacity of the collagens, with interest for biotechnological application, as the incorporation as an ingredient in cosmetic formulation. Furthermore, the use of collagen isolated from skin byproducts represents a high economic value with decreasing collagen cost for industrial purposes and is also an environmentally sustainable source for industrial uses

Green processing of porous chitin structures for biomedical applications combining ionic liquids and supercritical fluid technology

The application of green chemistry principles in the processing of materials for advanced technologies is a steadily increasing field of research. In this work porous chitin-based materials were developed by combining the processing of chitin using ionic liquids (ILs)as a green solvent together with the use of super- critical fluid technology(SCF) as clean technology.Chitin was dissolved in 1-butyl-3-imidazolium acetate,followed by regeneration of the polymer in ethanol in specific moulds.The IL was removed using Soxhlet extraction and successive steps of extraction with SCF using carbon dioxide/ethanol ratios of 50/ 50 and70/30.The developed porous chitin-based structures (ChIL)can be classified as mesoporous materials,with very low density and high porosity.The cytotoxicity of ChIL extracts was investigated using L929 fibroblast like cells,and the results demonstrated that the produced materials have extremely lowcytotoxicityl evels.Therefore,the findings suggest that the porous chitin structures may be potential candidates for a number of biomedical applications,including tissue engineering.Fundação para a Ciência e Tecnologia (FCT)S.S.S. and A.R.C.D. thank the Portuguese Foundation for Science and Technology (FCT) for post-doctoral fellowships (SFRH/BPD/ 45307/2008 and SFRH/BDP/34994/2007, respectively). This work was partially supported by the FCT (Project PTDC/QUI/68804/ 2006) and was carried out under the scope of the European NoE EXPERTISSUES (NMP3-CT-2004-500283)

Ionic liquids as foaming agents of semi-crystalline natural-based polymers

In this work, the ability to foam semi-crystalline natural-based polymers by supercritical fluid technology is evaluated. The application of this technique to natural polymers has been limited due to the fact that they are normally semi-crystalline polymers, which do not plasticize in the presence of carbon dioxide. This can be overcome by the use of plasticizers, such as glycerol, which is a commonly used plasticizer, or ionic liquids, which have recently been proposed as plasticizing agents for different polymers. Following the green chemistry principles, the main aim is, hereafter, the design and development of new 3D architectures of natural-based polymers, combining ionic liquids (IL) and supercritical fluid (SCF) technology. A polymeric blend of starch, one of the most abundantly occurring natural polymers, and poly-ε-caprolactone, a synthetic polymer, which is a biodegradable aliphatic polyester commonly used in an array of biomedical applications (SPCL), was processed by supercritical fluid foaming, at different operating conditions, namely pressure (10.0 up to 20.0 MPa), temperature (35 up to 60 °C) and soaking time (30 min up to 3 h). The ionic liquid tested in this work was 1-butyl-3-methylimidazolium acetate ([bmim]Ac). The interactions between SPCL and [bmim]Ac or glycerol were analysed by Fourier transform infrared spectroscopy, differential scanning calorimetry and by mechanical tests, using both tensile and compressive modes. Morphological analysis, porosity, interconnectivity and pore size distribution of the matrixes were evaluated and the morphology was analyzed by scanning electron microscopy and by micro-computed tomography. To our knowledge the use of ionic liquids as foaming agents is reported here for the first time. The results obtained suggest that this approach can further promote the development of composite polymer–IL materials, particularly for catalysis, chromatography, extraction and separation purposes.The research leading to these results has received funding from the European Union Seventh Framework Programme (FP7/2007-2013) under grant agreement no. KBBE-2010-266033 (project SPECIAL). S. S. Silva would like to thank the Portuguese Foundation for Science and Technology (FCT) for her post-doctoral fellowship (SFRH/BPD/45307/2008)

In situ enabling approaches for tissue regeneration: current challenges and new developments

In situ tissue regeneration can be defined as the implantation of tissue-specific biomaterials (by itself or in combination with cells and/or biomolecules) at the tissue defect, taking advantage of the surrounding microenvironment as a natural bioreactor. Up to now, the structures used were based on particles or gels. However, with the technological progress, the materials’ manipulation and processing has become possible, mimicking the damaged tissue directly at the defect site. This paper presents a comprehensive review of current and advanced in situ strategies for tissue regeneration. Recent advances to put in practice the in situ regeneration concept have been mainly focused on bioinks and bioprinting techniques rather than the combination of different technologies to make the real in situ regeneration. The limitation of conventional approaches (e.g., stem cell recruitment) and their poor ability to mimic native tissue are discussed. Moreover, the way of advanced strategies such as 3D/4D bioprinting and hybrid approaches may contribute to overcome the limitations of conventional strategies are highlighted. Finally, the future trends and main research challenges of in situ enabling approaches are discussed considering in vitro and in vivo evidence.info:eu-repo/semantics/publishedVersio

Multigenerational effects of carbendazim in daphnia magna: from a subcellular to a population level

Anthropogenic activities such as the use of pesticides may affect in some way aquatic biota populations, due to potential agricultural runoffs or disposals. Carbendazim is one example of a widely used fungicide with a high potential to end up in aquatic ecosystems through runoff. Deleterious effects observed at the individual level are possibly explained by changes in homeostasis at cellular and both can then be used to predict effects at the population level. In the present study, an isoclonal population of Daphnia magna (clone k6) was exposed to concentration that mimics relevant levels of carbendazim in the environment during twelve generations. The effects of carbendazim on biochemical biomarkers (cholinesterase, catalase and glutathione S‐transferase), lipid peroxidation and energy‐related parameters (carbohydrates, lipids and proteins jointly with energy available and energy consumption), parental longevity, and population growth (r) were assessed in some generations. The long‐term exposure to carbendazim presented no effect on the intrinsic rate of natural increase (r) of adult D. magna However, daphnids longevity decreased at the F12 when compared to daphnids from control. Cholinesterases, glutathione S‐transferase and lipid peroxidation showed differences between the exposed and non‐exposed populations. However, for catalase and energy related‐parameters no differences were observed between these two populations. Natural variability was observed throughout the test period, under control conditions, within the twelve generations. Overall, carbendazim induced some effects at the subcellular level that were translated to longevity, but latter vanishing in terms of population effects

Optimal design of THEDES based on Perillyl Alcohol and Ibuprofen

Therapeutic deep eutectic systems (THEDES) have dramatically expanded their popularity in the pharmaceutical field due to their ability to increase active pharmaceutical ingredients (APIs) bioavailability. However, their biological performance has not yet been carefully scrutinized. Herein, THEDES based on the binary mixture of perillyl alcohol (POH) and ibuprofen (IBU) were prepared using different molar ratios. Our comprehensive strategy includes the characterization of their thermal and structural behavior to identify the molar ratios that successfully form deep eutectic systems. The in vitro solubility of the different systems prepared has demonstrated that, unlike other reported examples, the presence of the terpene did not affect the solubility of the anti-inflammatory agent in a physiological simulated media. The biological performance of the systems was studied in terms of their antimicrobial activity against a wide panel of microorganisms. The examined THEDES showed relevant antimicrobial activity against all tested microbial strains, with the exception of P. aeruginosa. A synergistic effect from the combination of POH and IBU as a eutectic system was verified. Furthermore, the cytotoxic profile of these eutectic systems towards colorectal cancer (CRC) in vitro cell models was also evaluated. The results provide the indication that the cell viability varies in a dose-dependent manner, with a selective THEDES action towards CRC cells. With tunable bioactivities in a ratio-dependent manner, THEDES enhanced the antimicrobial and anticancer properties, representing a possible alternative to conventional therapies. Therefore, this study provides foreseeable indications about the utility of THEDES based on POH and IBU as strong candidates for novel active pharmaceutical systems.Foundation for Science and Technology (FCT), through project PTDC/BBB-490 EBB/1676/2014–Des.Zyme, Light2Skin-PTDC/CTM-CTM/29813/2017 and ERC-2016-CoG 725034 (ERC Consolidator Grant Des.solve). E.S. would also like to acknowledge the financial support by the FCT through the doctoral grant with reference number SFHR/BD/143902/2019. J.M.S. would also like to acknowledge the financial support by the FCT through the post-doctoral grant with reference number SFRH/BPD/116779/201

The relationships between functional and physicochemical soil parameters in metal(loid) mine tailings from Mediterranean semiarid areas support the value of spontaneous vegetation colonization for phytomanagement

Spontaneous growth of native vegetation in abandoned metal(loid) mine tailings can be valuable for phytomanagement restoration projects. This study aimed to assess the degree to which spontaneous plant colonization of abandoned metal(loid) mine tailings from Mediterranean semiarid areas led to functional soil improvement, and to identify, if possible, a critical level indicating that this functionality was moving towards that of the vegetated soils from the surroundings. Vegetation ecological indexes, plant life forms and species functional roles, together with physicochemical and functional soils parameters, were studied in metal(loid) mine tailings abandoned ~40 years ago and surrounding forests in SE Spain. Vegetation patches showed only small differences in physicochemical parameters related to soil abiotic stress conditions (pH, salinity and metals), regardless of the vegetation. However, vegetation patches with greater species diversity and richness and presence of plants with contrasted life forms and functional traits that facilitate the growth of less stress-tolerant species showed an increase of the soil microbial functionality (higher microbial biomass C, β-glucosidase activity, bacterial metabolic activity and functional diversity). Moreover, these vegetation patches showed a functional soil status comparable to that of the forests outside the mine tailings. In this sense, the present study showed the value of preserving these vegetation patches since they may act as nucleation spots favoring positive plant-soil feedbacks that may help to accelerate the functional recovery of these degraded areas. Furthermore, strategies to promote the creation of new vegetation patches including a variety of species with contrasted life forms and functional traits should be considered in phytomanagement restoration projects for abandoned metal(loid) mine tailings.The present study was supported by the project RESCLICONT (CGL2016-80981-R), funded by the Ministry of Science, Innovation and Universities of Spain through FEDER funds; by the project METOXCLIM (PTDC/CTA-AMB/29557/2017), funded by FEDER, through COMPETE2020 - Programa Operacional Competitividade e Internacionalização (POCI), and by national funds (OE), through FCT/MCTES. Thanks are due to FCT/MCTES for the financial support to CESAM (UIDP/50017/2020+UIDB/50017/2020), through national funds. A. Peñalver-Alcalá was hired by the project RESCLICONT and received a grant from the Technical University of Cartagena for a short stay at the University of Aveiro. S. Peixoto holds a PhD grant (SFRH/BD/117738/2016) from FCT. I. Silva received a research fellowship from the METOXCLIM project (BI/CESAM/0063/METOXCLIM/2018). A.R.R. Silva received a research fellowship from the METOXCLIM project (BI/CESAM/00060/METOXCLIM/2018). M.N. González-Alcaraz holds a Saavedra Fajardo research contract from the Séneca Foundation of the Murcia Region. The authors thank F.J. Jiménez-Cárceles from Biocyma S.L. for his valuable help with vegetation fieldwork

Corksorb enhances alkane degradation by hydrocarbonoclastic bacteria

Biosorbent materials are effective in the removal of spilled oil from water, but their effect on hydrocarbonoclastic bacteria is not known. Here, we show that corksorb, a cork-based biosorbent, enhances growth and alkane degradation by Rhodococcus opacus B4 (Ro) and Alcanivorax borkumensis SK2 (Ab). Ro and Ab degraded 96 ± 1% and 72 ± 2%, respectively, of a mixture of n-alkanes (2 g L1) in the presence of corksorb. These values represent an increase of 6 and 24%, respectively, relative to the assays without corksorb. The biosorbent also increased the growth of Ab by 51%. However, no significant changes were detected in the expression of genes involved in alkane uptake and degradation in the presence of corksorb relative to the control without the biosorbent. Nevertheless, transcriptomics analysis revealed an increased expression of rRNA and tRNA coding genes, which confirms the higher metabolic activity of Ab in the presence of corksorb. The effect of corksorb is not related to the release of soluble stimulating compounds, but rather to the presence of the biosorbent, which was shown to be essential. Indeed, scanning electron microscopy images and downregulation of pili formation coding genes, which are involved in cell mobility, suggest that cell attachment on corksorb is a determinant for the improved activity. Furthermore, the existence of native alkane-degrading bacteria in corksorb was revealed, which may assist in situ bioremediation. Hence, the use of corksorb in marine oil spills may induce a combined effect of sorption and stimulated biodegradation, with high potential for enhancing in situ bioremediation processes. © Copyright © 2021 Martins, Freitas, Castro, Silva, Gudiña, Sequeira, Salvador, Pereira and Cavaleiro.This study was funded by the Portuguese Foundation for Science and Technology (FCT) under the scope of project MORE (POCI-01-0145-FEDER-016575) and Salt Oil+ (POCI-01-0145-FEDER-030180) and of the strategic funding of UIDB/04469/2020 unit. Research of RS and JS was supported by Ph.D. grants SFRH/BD/116154/2016 and SFRH/BD/147271/2019, respectively, funded by FCT.info:eu-repo/semantics/publishedVersio