Midwest Guardrail System for Standard and Special Applications

Development, testing, and evaluation of the Midwest Guardrail System were continued from the original research started in 2000. This new strong-post W-beam guardrail system provides increased safety for impacts with higher-center-of-mass vehicles. Additional design variations of the new system included stiffened versions using reduced (half and quarter) post spacings as well as a standard guardrail design configured with a concrete curb 152 mm (6 in.) high. All full-scale vehicle crash tests were successfully performed in accordance with the Test Level 3 requirements specified in NCHRP Report 350: Recommended Procedures for the Safety Performance Evaluation of Highway Features. The research study also included dynamic bogie testing on steel posts placed at various embedment depths and computer simulation modeling with BARRIER VII to analyze and predict dynamic guardrail performance. Recommendations for the placement of the original Midwest Guardrail System as well as its stiffened variations were also made

Safety Investigation and Guidance for Work-Zone Devices in Freight Transportation Systems Subjected to Passenger Car and Truck Impacts with New Crash Standards

Crashworthy, work-zone, portable sign support systems accepted under NCHRP Report No. 350 were analyzed to predict their safety peformance according to the TL-3 MASH evaluation criteria. An analysis was conducted to determine which hardware parameters of sign support systems would likely contribute to the safety performance with MASH. The acuracy of the method was evaluated through full-scale crash testing. Four full-scale crash tests were conducted with a pickup truck. Two tall-mounted, sign support systems with aluminum sign panels failed the MASH criteria due to windshield penetration. One low-mounted system with a vinyl, roll-up sign panel failed the MASH criteria due to windshield and floorboard penetration. Another low-mounted system with an aluminum sign panel successfully met the MASH criteria. Four full-scale crash tests were conducted with a small passenger car. The low-mounted tripod system with an aluminum sign panel failed the MASH criteria due to windshield penetration. One low-mounted system with aluminum sign panel failed the MASH criteria due to excessive windshield deformation, and another similar system passed the MASH criteria. The low-mounted system with a vinyl, roll-up sign panel successfully met the MASH criteria. Hardware parameters of work-zone sign support systems that were determined to be important for failure with MASH include sign panel material, the height to the top of the mast, the presence of flags, sign-locking mechanism, base layout and system orientation. Flowcharts were provided to assist manufacturers when designing new sign support systems

Midwest Guardrail System for Standard and Special Applications

Development, testing, and evaluation of the Midwest Guardrail System were continued from the original research started in 2000. This new strong-post W-beam guardrail system provides increased safety for impacts with higher-center-of-mass vehicles. Additional design variations of the new system included stiffened versions using reduced (half and quarter) post spacings as well as a standard guardrail design configured with a concrete curb 152 mm (6 in.) high. All full-scale vehicle crash tests were successfully performed in accordance with the Test Level 3 requirements specified in NCHRP Report 350: Recommended Procedures for the Safety Performance Evaluation of Highway Features. The research study also included dynamic bogie testing on steel posts placed at various embedment depths and computer simulation modeling with BARRIER VII to analyze and predict dynamic guardrail performance. Recommendations for the placement of the original Midwest Guardrail System as well as its stiffened variations were also made