Protective effect of Ssanghwa-tang fermented by Lactobacillus fermentum against carbon tetrachloride-induced acute hepatotoxicity

Ssanghwa-tang (SHT) is a traditional herbal medicine formula that has been used for the development of physical strength, relief of pain, and the reduction of fatigue. In this study, we fermented SHT with Lactobacillus fermentum (L. fermentum), Lactobacillus gasseri (L.gasseri), or Lactobacillus casei (L.casei) to investigate the hepatoprotective effects ofSHT and fermented SHT with Lactobacillus on carbon tetrachloride (CCl4)-induced liver injury in rats. Rats were given CCl4 (1 ml/kg, 50% CCl4 in olive oil) intraperitoneally and either SHT or fermented SHTs (15 ml/kg) was administered 30 min before CCl4. At 24 hr after CCl4 injection, the levels of transaminases in the serum were markedly increased. These increases were significantly attenuated by either SHT + L. fermentum or SHT+ L.gasseri. However, SHT and SHT + L.casei showed slight suppression of the increase of transaminases. The liver histological changes were diminished by treatment with SHT + L. fermentum. Additionally, the potential hepatoprotective effect of fermented-SHTs correlated with the amount of unknown metabolite which is produced during fermentation process with L. fermentum, L.gasseri, or L.casei. Therefore, these results suggest that the hepatoprotective effect of SHT may be improved by fermentation with L. fermentum and the intestinal bacterial enzyme activities may likely play an important role in the pharmacological action of herbal medicines. Abbreviations: ALT: Alanine aminotransferase; AST: Aspartate aminotransferase; LDH: Lactate dehydrogenase; Carbontetrachloride: CCl4; L.casei: Lactobacillus casei; L. fermentum: Lactobacillus fermentum; L.gasseri: Lactobacillus gasseri; SHT: Ssanghwa-tang.Key words: Carbon tetrachloride, Fermentation, Herbal fomula, Lactobacillus, Ssanghwa-tang

Evaluation of 3D printed PCL/PLGA/beta-TCP versus collagen membranes for guided bone regeneration in a beagle implant model

Here, we compared 3D-printed polycaprolactone/poly(lactic-co-glycolic acid)/beta-tricalcium phosphate (PCL/PLGA/beta-TCP) membranes with the widely used collagen membranes for guided bone regeneration (GBR) in beagle implant models. For mechanical property comparison in dry and wet conditions and cytocompatibility determination, we analyzed the rate and pattern of cell proliferation of seeded fibroblasts and preosteoblasts using the cell counting kit-8 assay and scanning electron microscopy. Osteogenic differentiation was verified using alizarin red S staining. At 8 weeks following implantation in vivo using beagle dogs, computed tomography and histological analyses were performed after sacrifice. Cell proliferation rates in vitro indicated that early cell attachment was higher in collagen than in PCL/PLGA/beta-TCP membranes; however, the difference subsided by day 7. Similar outcomes were found for osteogenic differentiation, with approximately 2.5 times greater staining in collagen than PCL/PLGA/beta-TCP, but without significant difference by day 14. In vivo, bone regeneration in the defect area, represented by new bone formation and bone-to-implant contact, paralleled those associated with collagen membranes. However, tensile testing revealed that whereas the PCL/PLGA/beta-TCP membrane mechanical properties were conserved in both wet and dry states, the tensile property of collagen was reduced by 99% under wet conditions. Our results demonstrate in vitro and in vivo that PCL/PLGA/beta-TCP membranes have similar levels of biocompatibility and bone regeneration as collagen membranes. In particular, considering that GBR is always applied to a wet environment (e.g. blood, saliva), we demonstrated that PCL/PLGA/beta-TCP membranes maintained their form more reliably than collagen membranes in a wet setting, confirming their appropriateness as a GBR membrane.11109Ysciescopu

3D printing technology to control BMP-2 and VEGF delivery spatially and temporally to promote large-volume bone regeneration

When large engineered tissue structures are used to achieve tissue regeneration, formation of vasculature is an essential process. We report a technique that combines 3D printing with spatial and temporal control of dual growth factors to prevascularize bone tissue. Human dental pulp stem cells (DPSCs) that have both osteogenic and vasculogenic potential were printed with bone morphogenetic protein-2 (BMP- 2) in the peripheral zone of the 3D printed construct, and with the vascular endothelial growth factor (VEGF) in the central zone, in which a hypoxic area forms. The structure was implanted in the back of a mouse and tissue regeneration was assessed after 28 d. Microvessels were newly formed in the hypoxic area of the printed large volume structure, and angiogenesis from the host tissue was also observed. Bone regeneration was faster in prevascularized structures than in nonvascularized structures. The 3D-printed prevascularized structure could be a promising approach to overcome the size limitation of tissue implants and to enhance bone regeneration.open114635sciescopu

Determination of sodium fatty acid in soap Formulation Using Fourier Transform Infrared (FTIR) spectroscopy and multivariate calibrations.

Fourier Transform Infrared (FTIR) spectroscopy using an attenuated total reflectance (ATR) accessory has been investigated as a method for the determination of sodium-fatty acid (sodium-FA) in soap formulations. Multivariate calibrations namely partial least squares regression (PLS) and principle component regression (PCR) were developed for the prediction of sodium-FA using spectral ranges on the basis of relevant IR absorption bands related to sodium-FA. The sodium-FA content in soap formulations was predicted accurately at wavenumbers of 1,570–1,550 cm−1, which is specific for RCOO− Na+ vibration. The PLS method was found to be a consistently better predictor when both PLS and principal component regression (PCR) analyses were used for quantification of sodium-FA. Furthermore, FTIR spectroscopy can be an alternative technique to American oil Chemist Society methods which use a titrimetric technique because FTIR offers rapid, easy sample preparation and is friendly to the environment

Drosophila selenophosphate synthetase 1 regulates vitamin B6 metabolism: prediction and confirmation

<p>Abstract</p> <p>Background</p> <p>There are two selenophosphate synthetases (SPSs) in higher eukaryotes, SPS1 and SPS2. Of these two isotypes, only SPS2 catalyzes selenophosphate synthesis. Although SPS1 does not contain selenophosphate synthesis activity, it was found to be essential for cell growth and embryogenesis in <it>Drosophila</it>. The function of SPS1, however, has not been elucidated.</p> <p>Results</p> <p>Differentially expressed genes in <it>Drosophila </it>SL2 cells were identified using two-way analysis of variance methods and clustered according to their temporal expression pattern. Gene ontology analysis was performed against differentially expressed genes and gene ontology terms related to vitamin B6 biosynthesis were found to be significantly affected at the early stage at which megamitochondria were not formed (day 3) after <it>SPS1 </it>knockdown. Interestingly, genes related to defense and amino acid metabolism were affected at a later stage (day 5) following knockdown. Levels of pyridoxal phosphate, an active form of vitamin B6, were decreased by <it>SPS1 </it>knockdown. Treatment of SL2 cells with an inhibitor of pyridoxal phosphate synthesis resulted in both a similar pattern of expression as that found by <it>SPS1 </it>knockdown and the formation of megamitochondria, the major phenotypic change observed by <it>SPS1 </it>knockdown.</p> <p>Conclusions</p> <p>These results indicate that SPS1 regulates vitamin B6 synthesis, which in turn impacts various cellular systems such as amino acid metabolism, defense and other important metabolic activities.</p

Degradation of a benzene–toluene mixture by hydrocarbon-adapted bacterial communities

We examined the rate of degradation of a benzene–toluene mixture in aerobic microcosms prepared with samples of an aquifer that lies below a petrochemical plant (SIReN, UK). Five samples exposed to different concentrations of benzene (from 0.6 to 317 mg l−1) were used. Fast degradation (approx. 1–6 mg l−1 day−1) of both contaminants was observed in all groundwater samples and complete degradation was recorded by the seventh day except for one sample. We also identified the microbial community in each of the samples by culture-independent techniques. Two of the less impacted samples harbour the aerobic benzene degrader Pseudomonas fluorescens, while Acidovorax and Arthrobacter spp. were found in the most polluted sample and are consistent with the population observed in situ. Hydrogenophaga was found in the deepest sample while Rhodoferax spp. were recovered in an alkaline sample (pH 8.4) and may also be implicated in benzene degradation. Time series analysis shows that each of the samples has a different community but they remain stable over the degradation period. This study provides new information on a well not previously studied (no. 309s) and confirms that adapted communities have the ability to degrade hydrocarbon mixtures and could be used in further bioaugmentation approaches in contaminated sites

S-allylmercaptocysteine reduces carbon tetrachloride-induced hepatic oxidative stress and necroinflammation via nuclear factor kappa B-dependent pathways in mice

Purpose To study the protective effects and underlying molecular mechanisms of SAMC on carbon tetrachloride (CCl4)-induced acute hepatotoxicity in the mouse model. Methods Mice were intraperitoneally injected with CCl4 (50 μl/kg; single dose) to induce acute hepatotoxicity with or without a 2-h pre-treatment of SAMC intraperitoneal injection (200 mg/kg; single dose). After 8 h, the blood serum and liver samples of mice were collected and subjected to measurements of histological and molecular parameters of hepatotoxicity. Results SAMC reduced CCl4-triggered cellular necrosis and inflammation in the liver under histological analysis. Since co-treatment of SAMC and CCl4 enhanced the expressions of antioxidant enzymes, reduced the nitric oxide (NO)-dependent oxidative stress, and inhibited lipid peroxidation induced by CCl4. SAMC played an essential antioxidative role during CCl4-induced hepatotoxicity. Administration of SAMC also ameliorated hepatic inflammation induced by CCl4 via inhibiting the activity of NF-κB subunits p50 and p65, thus reducing the expressions of pro-inflammatory cytokines, mediators, and chemokines, as well as promoting pro-regenerative factors at both transcriptional and translational levels. Conclusions Our results indicate that SAMC mitigates cellular damage, oxidative stress, and inflammation in CCl4-induced acute hepatotoxicity mouse model through regulation of NF-κB. Garlic or garlic derivatives may therefore be a potential food supplement in the prevention of liver damage