A High Step-Up Transformerless DC-DC Converter with New Voltage Multiplier Cell Topology and Coupled Inductor

In this paper, a new high step-up transformerless DC-DC converter based on voltage multiplier and coupled inductor topology is presented. The proposed converter has two stages. In the first stage, a modified boost converter is designed by the coupled inductor and in the second stage, a new voltage multiplier by using a coupled inductor was illustrated. In this converter, high voltage gain can be achieved by adjusting the turn ratio of two coupled inductors and duty cycle which result in three degrees of design freedom. Using a single power switch with low on-resistance in the converter structure leads to simple control and low conduction loss. Also, total voltage stresses of active elements are decreased which cause to increase efficiency. Steady-state performance and theoretical achievements are confirmed by experimental test results on a test setup with one 200 W DC-DC prototype.©2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.fi=vertaisarvioitu|en=peerReviewed

Model Predictive Controllers With Capacitor Voltage Balancing for a Single-Phase Five-Level SiC/Si Based ANPC Inverter

Employing both high bandwidth (HBW) controller and wide bandgap (WBG) devices in the structure of converters improve the system size, performance, and efficiency. In this paper, HBW model predictive controllers (MPCs) are proposed, with both fixed and unfixed switching frequencies, to control a single-phase five-level hybrid active neutral-point-clamped (ANPC) inverter. A hybrid modulation technique is considered in this paper, in which some of the switches are modulating with high frequency. Therefore, Silicon-Carbide (SiC) MOSFETs are employed in the converter structure to increase the switching frequency and consequently reduce the filter size and increase converter power density. To have the functionality of multilevel output voltage, some restrictions are defined in the adopted MPC with unfixed switching frequency. In the MPC with the constant switching frequency, predefined switching sequences are employed for all sectors. Moreover, to control the neutral point (NP) voltage, the applied times of both small voltage vectors are sets through a cost function. Finally, the simulation and experimental results prove the ability of both proposed methods to control the voltages of the load and NP.This work is licensed under a Creative Commons Attribution 4.0 License. For more information, see https://creativecommons.org/licenses/by/4.0/This work was supported by the APETT project, funded by Innovation Fund Denmark.fi=vertaisarvioitu|en=peerReviewed

A multi-output AC/DC energy conversion system for grid integration of bioelectrochemical power-to-gas storage

Bioelectrochemical Energy Storage (BES) systems are able to convert electrical power into biomethane and resemble the structure of fuel cells, as several low voltage modules are connected in series creating stacks, which are in turn parallelized to reach the desired power. However, in this case, BES modules act as gas energy storage/load that generate storable biomethane as a product. This paper proposes a multi-output multilevel AC/DC power conversion system for BES stacks. The proposed topology has a structure like a modular multi-level converter (MMC) wherein BES stacks are connected to submodules and only a capacitor exists in the DC link. Therefore, it needs only a small filter on the AC side while voltages and powers of all BES stacks are simultaneously under control. A mathematical model of the proposed power conversion system is presented, and then a control scheme has been designed in order to achieve the following goals: 1) simultaneous control of all output voltages; 2) independent control of the active and reactive power interchanged with the grid; 3) control the quality of grid current; 4) suppression of circulating current. For verification of the system performance, OPAL-RT real-time simulation results that are obtained from a 10-kW BES system containing 18 stacks are presented.© 2022 The Authors. Published by Elsevier Ltd, under a Creative Commons license https://creativecommons.org/licenses/by/4.0/fi=vertaisarvioitu|en=peerReviewed

Operation and Efficiency Analysis of a 5-level Single-Phase Hybrid Si/SiC Active Neutral Point Clamped Converter

The ability to improve both the size and efficiency of multilevel single-phase converters is a key to uplift them as an attractive solution for industries, while the high number of switches and complex modulation techniques understandably make them unattractive. 5-level active neutral point clamped converter, due to its inherent advantages such as employing different switching frequencies and using different switch technologies, presents an ideal candidate for study. This paper performs a comprehensive analysis of the converter to highlight the advantages of it. This analysis results in a modified hybrid modulation that effectively regulates the neutral point (NP) of the dc-link. Consequently, the combination of the topology and the modified modulation make the converter ideal to utilize two different switch technologies- in this paper Silicon Carbide (SiC) and Si MOSFET. To evaluate the analysis and the effectiveness of modulation, a 2kW hybrid 5-level ANPC is built. Analyzing of the behavior of the converter current, power loss in the filter and switches are, therefore, calculated. The efficiency measurement is performed and compared with the calculated efficiency. There is a close coherency between the measurement and the calculated results and a peak efficiency of 98.4% is achieved.© 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.fi=vertaisarvioitu|en=peerReviewed

Three-Level Reduced Switch AC/DC/AC Power Conversion System for High Voltage Electric Vehicles

Two of the main challenges of recent electric vehicles (EVs) are the charging time and high initial cost. To solve the problem associated with long charging time, the car manufacturers are moving from 400 V battery EV (BEV) to 800 V BEV, which enables the utilization of multi-level converters in EV applications. This paper presents a power conversion system consisting of a Vienna rectifier and a two/three level hybrid inverter as a machine-side inverter to drive a permanent-magnet synchronous motor (PMSM). The Vienna rectifier improves the quality of the grid-side current and provides a regulated DC-link voltage. The proposed inverter, known as a 10-switch inverter, offers high output current quality with a lower number of active switches, making it compact and cost-effective. The field-oriented control (FOC), along with the SPWM modulation, is implemented to control the system. A reliable and cost-effective PMSM drive system demands sensorless control; therefore, a sliding mode observer (SMO) is used to estimate the rotor position and velocity. The accuracy of the proposed system was proved through the simulation results from MATLAB/Simulink.© 2022 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed

Realization of a 10 kW MES power to methane plant based on unified AC/DC converter

This paper presents a galvanic isolated multi output AC/DC topology that is suitable for Microbial electrosynthesis (MES) based Power to Methane energy storage systems. The presented scheme utilizes a three phase back to back converters, a single-input and multiple-output three phase transformer, single diode rectifiers and buck converters that employ a proper interconnection between MES cells and the mains. The proposed topology merges all the required single phase AC/DC converters as a unified converter which reduces the overall system size and provides system integrity and overall controllability. The proposed control scheme allows to achieve the following desired goals:1) Simultaneous control of all cells; 2) Absorbing power from the grid and covert to methane when the electricity price goes down; 3) the power factor and the quality of grid current is under control; 4) Supplying MES cells at the optimal operating point. For verification of system performance, Real time simulation results that are obtained from a 10-kW MES energy storage are presented.Postprint (author's final draft

Day-Ahead Scheduling for Economic Dispatch of Combined Heat and Power with Uncertain Demand Response

This paper presents an energy management method for the interconnected operation of power, heat, Combined Heat and Power (CHP) units to settle the Day-Ahead market in the presence of a demand response program (DRP). A major challenge in this regard is the price uncertainty for DRP participants. First, the definitive model of the problem is introduced from the perspective of the Regional Market Manager (RMM) in order to minimize the total supply cost in the presence of TOU program, which is a type of DRP. Furthermore, a market-oriented tensile model is presented in the form of a combination of over-lapping generations (OLG) and price elasticity (PE) formulations to determine the amount of electricity demand in the TOU program. Then, a price uncertainty model of the proposed problem is introduced according to the IGDT risk aversion and risk-taking strategies considering information gap decision theory (IGDT). The above problem is solved through the use of the co-evolutionary particle swarm optimization (C-PSO) algorithm and the proposed model is implemented on a standard seven-unit system for a period of 24 hours.© 2022 authors. Published by IEEE. This work is licensed under a Creative Commons Attribution 4.0 License. For more information, see https://creativecommons.org/licenses/by/4.0/fi=vertaisarvioitu|en=peerReviewed

A High Gain AC-DC Rectifier Based on Current-Fed Cockcroft-Walton Voltage Multiplier for Motor Drive Applications

This paper proposes a novel high-gain AC-DC converter based on the Cockcroft-Walton (CW) voltage multiplier which can be utilized in motor drive systems with low input voltage. In this topology, use of the voltage multiplier and boost circuit results in the increment of converter gain which has a significant impact on the cost and efficiency of the system. Moreover, in this converter, the AC voltage is directly changed to DC voltage using the switching method in high frequency and, as well, the power factor is corrected. Besides, this high-frequency converter contributes to the reduction of output ripple. On the other hand, cost efficiency, the low voltage stress on capacitors and diodes, compactness, and the high voltage ratio, are achieved from the Cockcroft-Walton circuit. Furthermore, the hysteresis method is presented for converter switching to correct the power factor. The converter is simulated in MATLAB software to demonstrate the effectiveness of the suggested method. Lastly, a laboratory prototype of the suggested converter is built, several tests are done in order to verify the theoretical analysis, and comprehensive comparison with the state-of-the-art converter is done.© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed

Switching Strategy Development, Dynamic Model, and Small Signal Analysis of Current-Fed Cockcroft-Walton Voltage Multiplier

High voltage generation, is one of the main applications of the Cockcroft-Walton voltage multiplier (CWVM), however recently this structure is investigated to be used for high step-up DC-DC applications. This paper discusses dynamic behaviour and small-signal modelling of a CWVM based DC-DC converter and investigates how switching strategy can affect the dynamic performance of the converter. This study firstly presents, a new switching method, the steady-state relations are derived and compared to the conventional switching strategy, which shows that the proposed method equilibrates the voltage and current stress of the switches and decreases the current ripple of the input inductor. Then, the converter is dynamically modelled and analyzed using the pole-zero map. The analysis shows that the proposed switching strategy improves the dynamic behaviour of the converter. The effect of the passive elements on dynamic performance is also discussed. Experimental results are presented for a 160 W prototype to validate the evaluated performance and the dynamic analysis.©2021 Authors. Published by IEEE. This work is licensed under a Creative Commons Attribution 4.0 License. For more information, see https://creativecommons.org/licenses/by/4.0/fi=vertaisarvioitu|en=peerReviewed

Future Renewable Energy Communities Based Flexible Power Systems

This paper presents a new holistic approach that combines solutions for the future power systems. It describes clearly how solar energy is definitely the best outlet for a clean and sustainable planet, either due to their use in both vertical (V) or horizontal (H) forms such as: hydroelectric V&H, wind V&H, thermo-oceanic V&H, water movement sea V&H (tides and waves), solar thermoelectric, PV, and surface geothermal energy. New points of view and simple formulas are suggested to calculate the best characteristic intensity, storage means and frequency for specific places and how to manage the most well-known renewable sources of energy. Future renewables-based power system requires a huge amount of flexibility from different type and size of controllable energy resources. These flexible energy resources can be used in an aggregated manner to provide different ancillary services for the distribution and transmission network. In addition, flexible energy resources and renewable generation can be utilized in different kinds of energy communities and smart cities to benefit all stakeholders and society at the same time with future-proof market structures, new business models and management schemes enabling increased utilization of flexible energy resources. Many of the flexible energy resources and renewable-based generation units are also inverter-interfaced and therefore the authors present future power converter systems for energy sources as well as the latest age of multilevel converters.© 2021 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).fi=vertaisarvioitu|en=peerReviewed