Extended supersymmetric sigma models in AdS_4 from projective superspace

There exist two superspace approaches to describe N=2 supersymmetric nonlinear sigma models in four-dimensional anti-de Sitter (AdS_4) space: (i) in terms of N=1 AdS chiral superfields, as developed in arXiv:1105.3111 and arXiv:1108.5290; and (ii) in terms of N=2 polar supermultiplets using the AdS projective-superspace techniques developed in arXiv:0807.3368. The virtue of the approach (i) is that it makes manifest the geometric properties of the N=2 supersymmetric sigma-models in AdS_4. The target space must be a non-compact hyperkahler manifold endowed with a Killing vector field which generates an SO(2) group of rotations on the two-sphere of complex structures. The power of the approach (ii) is that it allows us, in principle, to generate hyperkahler metrics as well as to address the problem of deformations of such metrics. Here we show how to relate the formulation (ii) to (i) by integrating out an infinite number of N=1 AdS auxiliary superfields and performing a superfield duality transformation. We also develop a novel description of the most general N=2 supersymmetric nonlinear sigma-model in AdS_4 in terms of chiral superfields on three-dimensional N=2 flat superspace without central charge. This superspace naturally originates from a conformally flat realization for the four-dimensional N=2 AdS superspace that makes use of Poincare coordinates for AdS_4. This novel formulation allows us to uncover several interesting geometric results.Comment: 88 pages; v3: typos corrected, version published in JHE

Melting in the Fe–C system to 70 GPa

We determined high-pressure melting curves for Fe₃C, Fe₇C₃ and the Fe-Fe₃C eutectic using laser-heated diamond anvil cell techniques. The principal criterion for melting is the observation of plateaus in the temperature vs. laser power function, which is an expected behavior at isobaric invariant points (e.g. congruent, eutectic, or peritectic melting) as increased power provides the latent heat of melting. We verified this technique by reproducing the melting curves of well-studied congruently melting compounds at high pressure (Fe, Pt, FeS, Pb), and by comparison with melting determinations made using thermocouple-based large-volume press techniques. The incongruent melting curve of Fe₃C measured to 70 GPa has an apparent change in slope at ~ 8 GPa, which we attribute to stabilization of FeC₃ at the solidus and the creation of a P-T invariant point. We observe that Fe₇C₃ melts at higher temperatures than Fe₃C between 14 and 52 GPa and has a steep P-T slope, and on this basis predicts an expanding field of Fe₇C₃ + liquid with pressure. The Fe-Fe₃C eutectic melting curve measured to 70 GPa agrees closely with multi-anvil data and thermodynamic calculations. We also measured the eutectic composition as a function of pressure using an in situ X-radiographic imaging technique, and find a rapid drop in carbon in the eutectic composition above about 20 GPa, generally consistent with previous thermodynamic calculations, and predict that the eutectic lies close to pure iron by ~ 50 GPa. We use these observations to extrapolate phase relations to core-relevant pressures. Convergence of the Fe₃C and Fe-Fe₃C eutectic melting curves indicate that Fe₃C is replaced at the solidus by Fe₇C₃ at ~ 120 GPa, forming another P-T invariant point and a new eutectic between Fe and Fe₇C₃. Thus, Fe₃C is unlikely to be an important crystallizing phase at core conditions, whereas Fe₇C₃ could become an important crystallizing phase.11 page(s

Oilseed rape (Brassica napus) as a resource for farmland insect pollinators: quantifying floral traits in conventional varieties and breeding systems

This is the final version of the article. Available from the publisher via the DOI in this record.Oilseed rape (OSR; Brassica napus L.) is a major crop in temperate regions and provides an important source ofnutrition to many of the yield-enhancing insect flower visitors that consume floral nectar. The manipulation ofmechanisms that control various crop plant traits for the benefit of pollinators has been suggested in the bid toincrease food security, but little is known about inherent floral trait expression in contemporary OSR varieties orthe breeding systems used in OSR breeding programmes. We studied a range of floral traits in glasshouse-grown, certified conventional varieties of winter OSR to test for variation among and within breeding systems.We measured 24-h nectar secretion rate, amount, concentration and ratio of nectar sugars per flower, and sizesand number of flowers produced per plant from 24 varieties of OSR representing open-pollinated (OP), genicmale sterility (GMS) hybrid and cytoplasmic male sterility (CMS) hybrid breeding systems. Sugar concentrationwas consistent among and within the breeding systems; however, GMS hybrids produced more nectar and moresugar per flower than CMS hybrid or OP varieties. With the exception of ratio of fructose/glucose in OP vari-eties, we found that nectar traits were consistent within all the breeding systems. When scaled, GMS hybridsproduced 1.73 times more nectar resource per plant than OP varieties. Nectar production and amount of nectarsugar in OSR plants were independent of number and size of flowers. Our data show that floral traits of glass-house-grown OSR differed among breeding systems, suggesting that manipulation and enhancement of nectarrewards for insect flower visitors, including pollinators, could be included in future OSR breeding programmes.This work was fundedby the BBSRC, including support from an Insect Pollinators Ini-tiative grant awarded to GAW (BB/I000968/1) that was jointlyfunded by the BBSRC, NERC, the Wellcome Trust, Defra, andthe Scottish Government. Support was also received from HighWycombe Beekeepers’ Association. Rothamsted Researchreceives strategic funding from the Biotechnology and BiologicalSciences Research Council (BBSRC) of the UK

The FeSi phase diagram to 150 GPa

The melting curve of FeSi has been determined to 150 GPa in the laser-heated diamond anvil cell (LH-DAC) on the basis of discontinuities in the power versus temperature function. A multianvil experimental cross-check at 12 GPa using textural criteria as a proxy for melting is in good agreement with our LH-DAC results. The melting point of FeSi reaches ∼4000 K at the core mantle boundary and an extrapolated value of 4900 K at the inner-core boundary (ICB). We also present the melting curve as determined by the Lindemann melting law; this agrees well with our experimental curve to 70 GPa and then diverges to higher temperatures, reaching 6200 K at the ICB. These temperatures are substantially higher than previous LH-DAC determinations. The boundary of the ε-FeSi → CsCl-FeSi subsolidus transition has also been determined by synchrotron-based X-ray diffraction at high pressures, and the results confirm a negative Clapeyron slope for the transition. We conclude that if present, FeSi is likely to be solid within the D″ layer and is unlikely to be present within the inner core for any plausible bulk core silicon content.9 page(s

Comparison of next-generation portable pollution monitors to measure exposure to PM2.5 from household air pollution in Puno, Peru.

Assessment of personal exposure to PM2.5 is critical for understanding intervention effectiveness and exposure-response relationships in household air pollution studies. In this pilot study, we compared PM2.5 concentrations obtained from two next-generation personal exposure monitors (the Enhanced Children MicroPEM or ECM; and the Ultrasonic Personal Air Sampler or UPAS) to those obtained with a traditional Triplex Cyclone and SKC Air Pump (a gravimetric cyclone/pump sampler). We co-located cyclone/pumps with an ECM and UPAS to obtain 24-hour kitchen concentrations and personal exposure measurements. We measured Spearmen correlations and evaluated agreement using the Bland-Altman method. We obtained 215 filters from 72 ECM and 71 UPAS co-locations. Overall, the ECM and the UPAS had similar correlation (ECM ρ = 0.91 vs UPAS ρ = 0.88) and agreement (ECM mean difference of 121.7 µg/m3 vs UPAS mean difference of 93.9 µg/m3 ) with overlapping confidence intervals when compared against the cyclone/pump. When adjusted for the limit of detection, agreement between the devices and the cyclone/pump was also similar for all samples (ECM mean difference of 68.8 µg/m3 vs UPAS mean difference of 65.4 µg/m3 ) and personal exposure samples (ECM mean difference of -3.8 µg/m3 vs UPAS mean difference of -12.9 µg/m3 ). Both the ECM and UPAS produced comparable measurements when compared against a cyclone/pump setup

Arterial Spin-Labeling Perfusion Metrics in Pediatric Posterior Fossa Tumor Surgery

BACKGROUND AND PURPOSE: Pediatric posterior fossa tumors often present with hydrocephalus; postoperatively, up to 25% of patients develop cerebellar mutism syndrome. Arterial spin-labeling is a noninvasive means of quantifying CBF and bolus arrival time. The aim of this study was to investigate how changes in perfusion metrics in children with posterior fossa tumors are modulated by cerebellar mutism syndrome and hydrocephalus requiring pre-resection CSF diversion. MATERIALS AND METHODS: Forty-four patients were prospectively scanned at 3 time points (preoperatively, postoperatively, and at 3-month follow-up) with single- and multi-inflow time arterial spin-labeling sequences. Regional analyses of CBF and bolus arrival time were conducted using coregistered anatomic parcellations. ANOVA and multivariable, linear mixed-effects modeling analysis approaches were used. The study was registered at clinicaltrials.gov (NCT03471026). RESULTS: CBF increased after tumor resection and at follow-up scanning (P = .045). Bolus arrival time decreased after tumor resection and at follow-up scanning (P = .018). Bolus arrival time was prolonged (P = .058) following the midline approach, compared with cerebellar hemispheric surgical approaches to posterior fossa tumors. Multivariable linear mixed-effects modeling showed that regional perfusion changes were more pronounced in the 6 children who presented with symptomatic obstructive hydrocephalus requiring pre-resection CSF diversion, with hydrocephalus lowering the baseline mean CBF by 20.5 (standard error, 6.27) mL/100g/min. Children diagnosed with cerebellar mutism syndrome (8/44, 18.2%) had significantly higher CBF at follow-up imaging than those who were not (P = .040), but no differences in pre- or postoperative perfusion parameters were seen. CONCLUSIONS: Multi-inflow time arterial spin-labeling shows promise as a noninvasive tool to evaluate cerebral perfusion in the setting of pediatric obstructive hydrocephalus and demonstrates increased CBF following resolution of cerebellar mutism syndrome

Ultrafast control of donor-bound electron spins with single detuned optical pulses

The ability to control spins in semiconductors is important in a variety of fields including spintronics and quantum information processing. Due to the potentially fast dephasing times of spins in the solid state [1-3], spin control operating on the picosecond or faster timescale may be necessary. Such speeds, which are not possible to attain with standard electron spin resonance (ESR) techniques based on microwave sources, can be attained with broadband optical pulses. One promising ultrafast technique utilizes single broadband pulses detuned from resonance in a three-level Lambda system [4]. This attractive technique is robust against optical pulse imperfections and does not require a fixed optical reference phase. Here we demonstrate the principle of coherent manipulation of spins theoretically and experimentally. Using this technique, donor-bound electron spin rotations with single-pulse areas exceeding pi/4 and two-pulses areas exceeding pi/2 are demonstrated. We believe the maximum pulse areas attained do not reflect a fundamental limit of the technique and larger pulse areas could be achieved in other material systems. This technique has applications from basic solid-state ESR spectroscopy to arbitrary single-qubit rotations [4, 5] and bang-bang control[6] for quantum computation.Comment: 15 pages, 4 figures, submitted 12/2008. Since the submission of this work we have become aware of related work: J. Berezovsky, M. H. Mikkelsen, N. G. Stoltz, L. A. Coldren, and D. D. Awschalom, Science 320: 349-352 (2008

Small Scattered Fragments Do Not a Dwarf Make: Biological and Archaeological Data Indicate that Prehistoric Inhabitants of Palau Were Normal Sized

Current archaeological evidence from Palau in western Micronesia indicates that the archipelago was settled around 3000–3300 BP by normal sized populations; contrary to recent claims, they did not succumb to insular dwarfism

A rare presentation of atypical demyelination: tumefactive multiple sclerosis causing Gerstmann's syndrome

r. KS has been supported by a Higher Education Funding Council for England (HEFCE) Clinical Senior Lectureshi