Total Angular Momentum Conservation During Tunnelling through Semiconductor Barriers

We have investigated the electrical transport through strained p-Si/Si_{1-x}Ge_x double-barrier resonant tunnelling diodes. The confinement shift for diodes with different well width, the shift due to a central potential spike in a well, and magnetotunnelling spectroscopy demonstrate that the first two resonances are due to tunnelling through heavy hole levels, whereas there is no sign of tunnelling through the first light hole state. This demonstrates for the first time the conservation of the total angular momentum in valence band resonant tunnelling. It is also shown that conduction through light hole states is possible in many structures due to tunnelling of carriers from bulk emitter states.Comment: 4 pages, 4 figure

Design and simulation of losses in Ge/SiGe terahertz quantum cascade laser waveguides

The waveguide losses from a range of surface plasmon and double metal waveguides for Ge/Si1−xGex THz quantum cascade laser gain media are investigated at 4.79 THz (62.6 μm wavelength). Double metal waveguides demonstrate lower losses than surface plasmonic guiding with minimum losses for a 10 μm thick active gain region with silver metal of 21 cm−1 at 300 K reducing to 14.5 cm−1 at 10 K. Losses for silicon foundry compatible metals including Al and Cu are also provided for comparison and to provide a guide for gain requirements to enable lasers to be fabricated in commercial silicon foundries. To allow these losses to be calculated for a range of designs, the complex refractive index of a range of nominally undoped Si1−xGex with x = 0.7, 0.8 and 0.9 and doped Ge heterolayers were extracted from Fourier transform infrared spectroscopy measurements between 0.1 and 10 THz and from 300 K down to 10 K. The results demonstrate losses comparable to similar designs of GaAs/AlGaAs quantum cascade laser plasmon waveguides indicating that a gain threshold of 15.1 cm−1 and 23.8 cm−1 are required to produce a 4.79 THz Ge/SiGe THz laser at 10 K and 300 K, respectively, for 2 mm long double metal waveguide quantum cascade lasers with facet coatings

Design and simulation of losses in Ge/SiGe terahertz quantum cascade laser waveguides

The waveguide losses from a range of surface plasmon and double metal waveguides for Ge/Si1-xGex THz quantum cascade laser gain media are investigated at 4.79 THz (62.6 µm wavelength). Double metal waveguides demonstrate lower losses than surface plasmonic guiding with minimum losses for a 10 µm thick active gain region with silver metal of 21 cm-1 at 300 K reducing to 14.5 cm-1 at 10 K. Losses for silicon foundry compatible metals including Al and Cu are also provided for comparison and to provide a guide for gain requirements to enable lasers to be fabricated in commercial silicon foundries. To allow these losses to be calculated for a range of designs, the complex refractive index of a range of nominally undoped Si1-xGex with x = 0.7, 0.8 and 0.9 and doped Ge heterolayers were extracted from Fourier transform infrared spectroscopy measurements between 0.1 and 10 THz and from 300 K down to 10 K. The results demonstrate losses comparable to similar designs of GaAs/AlGaAs quantum cascade laser plasmon waveguides indicating that a gain threshold of 15.1 cm-1 and 23.8 cm-1 are required to produce a 4.79 THz Ge/SiGe THz laser at 10 K and 300 K, respectively, for 2 mm long double metal waveguide quantum cascade lasers with facet coatings. © 2020 OSA - The Optical Society. All rights reserved

Si-based n-type THz Quantum Cascade Emitter

Employing electronic transitions in the conduction band of semiconductor heterostructures paves a way to integrate a light source into silicon-based technology. To date all electroluminescence demonstrations of Si-based heterostructures have been p-type using hole-hole transitions. In the pathway of realizing an n-type Ge/SiGe terahertz quantum cascade laser, we present electroluminescence measurements of quantum cascade structures with top diffraction gratings. The devices for surface emission have been fabricated out of a 4-well quantum cascade laser design with 30 periods. An optical signal was observed with a maximum between 8-9 meV and full width at half maximum of roughly 4 meV

Control of Electron-State Coupling in Asymmetric Ge/Si-Ge Quantum Wells

Theoretical predictions indicate that the n-type Ge/Si-Ge multi-quantum-well system is the most promising material for the realization of a Si-compatible THz quantum cascade laser operating at room temperature. To advance in this direction, we study, both experimentally and theoretically, asymmetric coupled multi-quantum-well samples based on this material system, that can be considered as the basic building block of a cascade architecture. Extensive structural characterization shows the high material quality of strain-symmetrized structures grown by chemical vapor deposition, down to the ultrathin barrier limit. Moreover, THz absorption spectroscopy measurements supported by theoretical modeling unambiguously demonstrate inter-well coupling and wavefunction tunneling. The agreement between experimental data and simulations allows us to characterize the tunneling barrier parameters and, in turn, achieve highly controlled engineering of the electronic structure in forthcoming unipolar cascade systems based on n-type Ge/Si-Ge multi-quantum-wells

Control of electron-state coupling in asymmetric Ge/Si−Ge quantum wells

Theoretical predictions indicate that the n-type Ge / Si − Ge multi-quantum-well system is the most promising material for the realization of a Si -compatible THz quantum cascade laser operating at room temperature. To advance in this direction, we study, both experimentally and theoretically, asymmetric coupled multi-quantum-well samples based on this material system, that can be considered as the basic building block of a cascade architecture. Extensive structural characterization shows the high material quality of strain-symmetrized structures grown by chemical vapor deposition, down to the ultrathin barrier limit. Moreover, THz absorption spectroscopy measurements supported by theoretical modeling unambiguously demonstrate inter-well coupling and wavefunction tunneling. The agreement between experimental data and simulations allows us to characterize the tunneling barrier parameters and, in turn, achieve highly controlled engineering of the electronic structure in forthcoming unipolar cascade systems based on n-type Ge / Si − Ge multi-quantum-wells

Electron-doped SiGe Quantum Well Terahertz Emitters pumped by FEL pulses

We explore saturable absorption and terahertz photoluminescence emission in a set of n-doped Ge/SiGe asymmetric coupled quantum wells, designed as three-level systems (i.e., quantum fountain emitter). We generate a non-equilibrium population by optical pumping at the 1→3 transition energy using picosecond pulses from a free-electron laser and characterize this effect by measuring absorption as a function of the pump intensity. In the emission experiment we observe weak emission peaks in the 14–25 meV range (3–6 THz) corresponding to the two intermediate intersubband transition energies. The results represent a step towards silicon-based integrated terahertz emitters