879 research outputs found
Modelo prático para desmamar terneiros precocemente.
Com o objetivo de minimizar o efeito ocasionado pelo desmame abrupto, com as conseqüências ocasionadas pela troca de alimentação, foram avaliadas de forma que a prática de desmamar terneiros precocemente viesse a ser introduzida nas propriedades rurais como uma rotina de manejo.bitstream/item/55799/1/CO66.pd
Experimental muscle pain increases normalized variability of multidirectional forces during isometric contractions
Pain elicits complex adaptations of motor strategy, leading to impairments in the generation and control of steady forces, which depend on muscle architecture. The present study used a cross-over design to assess the effects of muscle pain on the stability of multidirectional (taskrelated and tangential) forces during sustained dorsiflexions, elbow flexions, knee extensions, and plantarflexions. Fifteen healthy subjects performed series of isometric contractions (13-s duration, 2.5, 20, 50, 70% of maximal voluntary force) before, during, and after experimental muscle pain. Three-dimensional force magnitude, angle and variability were measured while the task-related force was provided as feedback to the subjects. Surface electromyography was recorded from agonist and antagonist muscles. Pain was induced in agonist muscles by intramuscular injections of hypertonic (6%) saline with isotonic (0.9%) saline injections as control. The pain intensity was assessed on an electronic visual analogue scale. Experimental muscle pain elicited larger ranges of force angle during knee extensions and plantarflexions (P < 0.03) and higher normalized fluctuations of task-related (P < 0.02) and tangential forces (P < 0.03) compared with control assessments across force levels, while the mean force magnitudes, mean force angle and the level of muscle activity were non-significantly affected by pain. Increased multidirectional force fluctuations probably resulted from multiple mechanisms that, acting together, balanced the mean surface electromyography. Although pain adaptations are believed to aim at the protection of the painful site, the current results show that they result in impairments in steadiness of force
Feno e silagem como volumoso para confinamento de bovinos de corte.
bitstream/item/67190/1/CT-49-2001.pd
Effect of aggregates and ITZ on visco-damaged response of concrete at the meso scale level
A deep knowledge on the behavior of concrete materials at the mesoscale level
requires, as a fundamental aspect, to characterize aggregates and specifically, their thermal
properties if fire hazards (e.g. spalling) are accounted for. The assessment of aggregates
performance (and, correspondingly, concrete materials made of aggregates, cement paste and
ITZ –interfacial transition zone-) is crucial for defining a realistic structural response as well
as damage scenarios. Particularly, it is assumed that concrete creep is associated to cement
paste only and that creep obeys to the B3 model proposed by Bazant and Baweja since it
shows good compatibility with experimental results and it is properly justified theoretically.
The fully coupled 3D F.E. code NEWCON3D has been adopted to perform meso-scale
analyses of concrete characterized by aggregates of different types and different thermal
conductivities. Damage maps allows for defining an appropriate concrete mixture for
responding to spalling and for characterizing the coupled behaviour of ITZ as well
Numerical modelling of ellipsoidal inclusions
Within the framework of numerical algorithms for the threedimensional
random packing of granular materials this work presents an
innovative formulation for polydispersed ellipsoidal particles, including
an overlapping detection algorithm for an optimized simulation of the
mesostructure of geomaterials, particularly concrete.
Granular composite cement-based materials can be so reconstructed with
adequate precision in terms of grain size distribution. Specifically, the
algorithm performance towards the assumed inclusion shape (ellipsoidal or
spheric) and degree of regularity (round or irregular) is here discussed.
Examples on real grading curves prove that this approach is effective.
The advantages of the proposed method for computational mechanics
purposes are also disclosed when properly interfaced with visualization
CAD (Computer Aided Design) tools
Variability of three-dimensional forces increase during experimental knee pain
Knee pain is a common symptom of different knee pathologies, affecting muscle strength and force generation. Although the control of precise three-dimensional forces is essential for the performance of functional tasks, current evidence of pain effects in force variability is limited to single-directional assessments of contractions at moderate force levels. This study assessed the effects of experimental knee joint pain in the three-dimensional force variability during isometric knee extensions at a wide range of target forces (2.5-80 % of maximal voluntary contraction, MVC). Fifteen healthy subjects performed contractions before, immediately following, and after injections of hypertonic (painful) or isotonic (control) saline into the infrapatellar fat pad. Pain intensity was measured on a 10-cm visual analogue scale. Force magnitude, direction, and variability were assessed using a six-axis force sensor while activity of quadriceps and hamstring muscles was recorded by surface electromyography. Significant correlation was found between tangential force displacements and variability of quadriceps muscle activity. Experimental knee pain increased the variability of the task-related force component at all force levels, while variability of tangential force components increased at low forces (≤5 % of MVC). The mean quadriceps activity decreased during painful contractions only at 80 % of MVC. Pain adaptations underlying increased force variability at low contraction levels probably involve heterogeneous reorganization of muscle activity, which could not be detected by surface electrodes. These findings indicate a less efficient motor strategy during knee joint pain, suggesting that pain relief may enhance training for the control of smooth forces by knee pain patients
Investigation of stress-strain behaviour in concrete materials through the aid of 3D advanced measurement techniques
This work deals with the investigation of the mechanical behaviour of cementitious materials, following a mesoscopic approach where aggregates, grains and cement paste are explicitly represented, and the strict comparison between the numerical results and the experimental results from uniaxial tests is carried out.
For this purpose, solid models are created with the support of advanced techniques of measurement and detection, such as laser scanners or computer tomography (CT). The 3D laser- scanning technique in fact allows to acquire the exact shape of the grains added to the concrete mix design while, through the adoption of an ad-hoc random distribution algorithm, a realistic disposition of the inclusions is guaranteed. The industrial CT instead, is able to reproduce exactly the tested specimens; the geometry of the inclusions and their placement.
Once reconstructed realistic geometries for the models, the mechanical behaviour of concrete under uniaxial compression tests is numerically studied. A specific constitutive behaviour is assigned to each component; an elasto-plastic law with damage is assumed for the cement matrix while the aggregates are conceived to behave elastically.
The implemented damage-plasticity model consists in the combination of the non-associated plasticity model by Men\ue9trey-Willam, where the yield surface is described in function of the second and the third invariant of the deviatoric stress tensor and the scalar isotropic damage model by Mazars.
Comparisons between numerical and experimental results fairly prove the correctness of the suggested approach
Geometrical reconstruction of concrete materials through the aid of advanced measurement techniques and studies of their mechanical behavior
New Trends in Designing Parabolic trough Solar Concentrators and Heat Storage Concrete Systems in Solar Power Plants
Energy availability has always been an essential component of human civilization and the energetic consumption is directly linked to the produced wealth. In many depressed countries the level of solar radiation is considerably high and it could be the primary energy source under conditions that low cost, simple-to-be-used technologies are employed. Then, it is responsibility of the most advanced countries to develop new equipments to allow this progress for taking place. A large part of the energetic forecast, based on economic projection for the next decades, ensure us that fossil fuel supplies will be largely enough to cover the demand. The predicted and consistent increase in the energetic demand will be more and more covered by a larger use of fossil fuels, without great technology innovations. A series of worrying consequences are involved in the above scenario: important climatic changes are linked to strong CO2 emissions; sustainable development is hindered by some problems linked to certainty of oil and natural gas supply; problems of global poverty are not solved but amplified by the unavoidable increase in fossil fuel prices caused by an increase in demand. These negative aspects can be avoided only if a really innovative and more acceptable technology will be available in the next decades at a suitable level to impress a substantial effect on the society. Solar energy is the ideal candidate to break this vicious circle between economic progress and consequent greenhouse effect. The low penetration on the market shown today by the existent renewable technologies, solar energy included, is explained by well-known reasons: the still high costs of the produced energy and the \u201cdiscontinuity\u201d of both solar and wind energies. These limitations must be removed in reasonable short times, with the support of innovative technologies, in view of such an urgent scenario. On this purpose ENEA, on the basis of the Italian law n. 388/2000, has started an R&D program addressed to the development of CSP (Concentrated Solar Power) systems able to take advantage of solar energy as heat source at high temperature. One of the most relevant objectives of this research program (Rubbia, 2001) is the study of CSP systems operating in the field of medium temperatures (about 550\ub0C), directed towards the development of a new and low-cost technology to concentrate the direct radiation and efficiently convert solar energy into high temperature heat; another aspect is focused on the production of hydrogen by means of thermo-chemical processes at temperatures above 800\ub0C.
As well as cost reductions, the current innovative ENEA conception aims to introduce a set of innovations, concerning: i) The parabolic-trough solar collector: an innovative design to reduce production costs, installation and maintenance and to improve thermal efficiency is defined in collaboration with some Italian industries; ii) The heat transfer fluid: the synthetic hydrocarbon oil, which is flammable, expensive and unusable beyond 400\ub0C, is substituted by a mixture of molten salts (sodium and potassium nitrate), widely used in the industrial field and chemically stable up to 600\ub0C; iii) The thermal storage (TES): it allows for the storage of solar energy, which is then used when energy is not directly available from the sun (night and covered sky) (Pilkington, 2000). After some years of R&D activities, ENEA has built an experimental facility (defined within the Italian context as PCS, \u201cProva Collettori Solari\u201d) at the Research Centre of Casaccia in Rome (ENEA, 2003), which incorporates the main proposed innovative elements. The next step is to test these innovations at full scale by means of a demonstration plant, as envisioned by the \u201cArchimede\u201d ENEA/ENEL Project in Sicily. Such a project is designed to upgrade the ENEL thermo-electrical combined-cycle power plant by about 5 MW, using solar thermal energy from concentrating parabolic-trough collectors.
Particularly, the Chapter will focus on points i) and iii) above:
- loads, actions, and more generally, the whole design procedure for steel components of parabolic-trough solar concentrators will be considered in agreement with the Limit State method, as well as a new approach will be critically and carefully proposed to use this method in designing and testing \u201cspecial structures\u201d such as the one considered here;
- concrete tanks durability under prolonged thermal loads and temperature variations will be estimated by means of an upgraded F.E. coupled model for heat and mass transport (plus mechanical balance). The presence of a surrounding soil volume will be additionally accounted for to evaluate environmental risk scenarios.
Specific technological innovations will be considered, such as:
-higher structural safety related to the reduced settlements coming from the chosen shape of the tank (a below-grade cone shape storage);
- employment of HPC containment structures and foundations characterized by lower costs with respect to stainless steel structures;
- substitution of highly expensive corrugated steel liners with plane liners taking advantage of the geometric compensation of thermal dilations due to the conical shape of the tank;
- possibility of employing freezing passive systems for the concrete basement made of HPC, able to sustain temperature levels higher than those for OPC;
- fewer problems when the tank is located on low-strength soils
- …