A Review on Life Cycle Management Approach on Asset Qualification

All equipment’s used in the production of products shall be properly Validated, Qualified and Calibrated to demonstrate that it is suitable for its intended purpose. Qualification is an important aspect of the pharmaceutical quality system. When the equipment is properly qualified, verified and maintained, there is the possibility of Consistent performance of the equipment. A well designed qualification program saves valuable time and cost. Qualification is called a cyclic process because it is a never ending process. Appropriate documentation of the qualification program is very important as lack of the documented evidence does not give any meaning to qualification (Not documented it means not done).  The current programs and procedures of equipment qualification used within any pharmaceutical and bioscience industry are based on ‘regulatory requirements’, ‘voluntary standards’, ‘vendor practices’, and ‘industry practices’. The output is considerable variation in the way any pharmaceutical and biotechnological companies approach for the laboratory equipment. The lifecycle management approach of equipment qualification covers entire life cycle for the specification, design, manufacturing, installation, commissioning, qualification (4Qs Model DQ, IQ, OQ, PQ), operation & maintenance of equipment in a risk based life cycle management approach. The goal of any regulated pharmaceutical and bioscience company is to provide reliable and valid data suitable for its intended purpose. Main goal of equipment qualification is to form the basis for written procedures for production and process control which are designed to assure that the drug products have the SISPQ (Safety, Identity, Strength, Purity and Quality) Keywords: Validation, Calibration, Life cycle management approach, Qualification (4Qs Model- DQ, IQ, OQ & PQ), SISPQ (Safety, Identity, Strength, Purity and Quality

Search for pair production of boosted Higgs bosons via vector-boson fusion in the bb¯bb¯ final state using pp collisions at √s = 13 TeV with the ATLAS detector

A search for Higgs boson pair production via vector-boson fusion is performed in the Lorentz-boosted regime, where a Higgs boson candidate is reconstructed as a single large-radius jet, using 140 fb−1 of proton–proton collision data at √s = 13 TeV recorded by the ATLAS detector at the Large Hadron Collider. Only Higgs boson decays into bottom quark pairs are considered. The search is particularly sensitive to the quartic coupling between two vector bosons and two Higgs bosons relative to its Standard Model prediction, K2V . This study constrains K2V to 0.55 < K2V < 1.49 at the 95% confidence level. The value K2V = 0 is excluded with a significance of 3.8 standard deviations with other Higgs boson couplings fixed to their Standard Model values. A search for new heavy spin-0 resonances that would mediate Higgs boson pair production via vector-boson fusion is carried out in the mass range of 1–5 TeV for the first time under several model and decay-width assumptions. No significant deviation from the Standard Model hypothesis is observed and exclusion limits at the 95% confidence level are derived

Search for dark mesons decaying to top and bottom quarks in proton-proton collisions at √s = 13 TeV with the ATLAS detector

A search for dark mesons originating from strongly-coupled, SU(2) dark favor symmetry conserving models and decaying gaugephobically to pure Standard Model final states containing top and bottom quarks is presented. The search targets fully hadronic final states and final states with exactly one electron or muon and multiple jets. The analyzed data sample corresponds to an integrated luminosity of 140 fb−1 of proton-proton collisions collected at √s = 13 TeV with the ATLAS detector at the Large Hadron Collider. No significant excess over the Standard Model background expectation is observed and the results are used to set the first direct constraints on this type of model. The two-dimensional signal space of dark pion masses mπD and dark rho-meson masses mρD is scanned. For mπD /mρD = 0.45, dark pions with masses mπD < 940 GeV are excluded at the 95% CL, while for mπD /mρD = 0.25 masses mπD < 740 GeV are excluded

Combination of searches for Higgs boson decays into a photon and a massless dark photon using pp collisions at √s = 13 TeV with the ATLAS detector

A combination of searches for Higgs boson decays into a visible photon and a massless dark photon (H → γγd) is presented using 139 fb−1 of proton-proton collision data at a centre-of-mass energy of √s = 13 TeV recorded by the ATLAS detector at the Large Hadron Collider. The observed (expected) 95% confidence level upper limit on the Standard Model Higgs boson decay branching ratio is determined to be B(H → γγd) < 1.3% (1.5)%. The search is also sensitive to higher-mass Higgs bosons decaying into the same final state. The observed (expected) 95% confidence level limit on the cross-section times branching ratio ranges from 16 fb (20 fb) for mH = 400 GeV to 1.0 fb (1.5 fb) for mH = 3 TeV. Results are also interpreted in the context of a minimal simplified model

Search for non-resonant Higgs boson pair production in final states with leptons, taus, and photons in pp collisions at √s = 13 TeV with the ATLAS detector

A search is presented for non-resonant Higgs boson pair production, targeting the bbZZ, 4V (V = W or Z), V V τ τ , 4τ , γγV V and γγτ τ decay channels. Events are categorised based on the multiplicity of light charged leptons (electrons or muons), hadronically decaying tau leptons, and photons. The search is based on a data sample of proton-proton collisions at √s = 13 TeV recorded with the ATLAS detector during Run 2 of the Large Hadron Collider, corresponding to an integrated luminosity of 140 fb−1. No evidence of the signal is found and the observed (expected) upper limit on the cross-section for non-resonant Higgs boson pair production is determined to be 17 (11) times the Standard Model predicted cross-section at 95% confidence level under the background-only hypothesis. The observed (expected) constraints on the HHH coupling modifier, κλ, are determined to be −6.2 < κλ < 11.6 (−4.5 < κλ < 9.6) at 95% confidence level, assuming the Standard Model for the expected limits and that new physics would only affect κλ

Beam-induced backgrounds measured in the ATLAS detector during local gas injection into the LHC beam vacuum

Inelastic beam-gas collisions at the Large Hadron Collider (LHC), within a few hundred metres of the ATLAS experiment, are known to give the dominant contribution to beam backgrounds. These are monitored by ATLAS with a dedicated Beam Conditions Monitor (BCM) and with the rate of fake jets in the calorimeters. These two methods are complementary since the BCM probes backgrounds just around the beam pipe while fake jets are observed at radii of up to several metres. In order to quantify the correlation between the residual gas density in the LHC beam vacuum and the experimental backgrounds recorded by ATLAS, several dedicated tests were performed during LHC Run 2. Local pressure bumps, with a gas density several orders of magnitude higher than during normal operation, were introduced at different locations. The changes of beam-related backgrounds, seen in ATLAS, are correlated with the local pressure variation. In addition the rates of beam-gas events are estimated from the pressure measurements and pressure bump profiles obtained from calculations. Using these rates, the efficiency of the ATLAS beam background monitors to detect beam-gas events is derived as a function of distance from the interaction point. These efficiencies and characteristic distributions of fake jets from the beam backgrounds are found to be in good agreement with results of beam-gas simulations performed with theFluka Monte Carlo programme

Search for heavy Majorana neutrinos in e±e± and e±μ± final states via WW scattering in pp collisions at √s = 13 TeV with the ATLAS detector

A search for heavy Majorana neutrinos in scattering of same-sign W boson pairs in proton–proton collisions at √s = 13 TeV at the LHC is reported. The dataset used corresponds to an integrated luminosity of 140 fb−1, collected with the ATLAS detector during 2015–2018. The search is performed in final states including a same-sign ee or eμ pair and at least two jets with large invariant mass and a large rapidity difference. No significant excess of events with respect to the Standard Model background predictions is observed. The results are interpreted in a benchmark scenario of the Phenomenological Type-I Seesaw model. New constraints are set on the values of the |VeN|2 and |VeN V*μN| parameters for heavy Majorana neutrino masses between 50 GeV and 20 TeV, where VℓN is the matrix element describing the mixing of the heavy Majorana neutrino mass eigenstate with the Standard Model neutrino of flavour ℓ = e, μ. The sensitivity to the Weinberg operator is investigated and constraints on the effective ee and eμ Majorana neutrino masses are reported. The statistical combination of the ee and eμ channels with the previously published μμ channel is performed

The ATLAS trigger system for LHC Run 3 and trigger performance in 2022

The ATLAS trigger system is a crucial component of the ATLAS experiment at the LHC. It is responsible for selecting events in line with the ATLAS physics programme. This paper presents an overview of the changes to the trigger and data acquisition system during the second long shutdown of the LHC, and shows the performance of the trigger system and its components in the proton-proton collisions during the 2022 commissioning period as well as its expected performance in proton-proton and heavy-ion collisions for the remainder of the third LHC data-taking period (2022–2025)