Frequency-dependent effective permeability tensor of unsaturated polycrystalline ferrites

Frequency-dependent permeability tensor for unsaturated polycrystalline ferrites is derived through an effective medium approximation that combines both domain-wall motion and rotation of domains in a single consistent scattering framework. Thus derived permeability tensor is averaged on a distribution function of the free energy that encodes paramagnetic states for anhysteretic loops. The initial permeability is computed and frequency spectra are given by varying macroscopic remanent field.Comment: 24 pages, 3 figure

Universality of thermally assisted magnetic domain wall motion under spin torque

Thermally assisted motion of magnetic domain wall under spin torque is studied theoretically. It is shown that the wall velocity $v$ depends exponentially on the spin current, \Is, below the threshold value, in the same way as in a thermally activated motion driven by a force. A novel property of the spin torque driven case at low temperature is that the linear term in spin current is universal, i.e., \ln v \sim \frac{\pi\hbar}{2e}(\Is/\kB T). This behavior, which is independent of pinning and material constants, could be used to confirm experimentally the spin torque as the driving mechanism

Switching dynamics of a magnetostrictive single-domain nanomagnet subjected to stress

The temporal evolution of the magnetization vector of a single-domain magnetostrictive nanomagnet, subjected to in-plane stress, is studied by solving the Landau-Lifshitz-Gilbert equation. The stress is ramped up linearly in time and the switching delay, which is the time it takes for the magnetization to flip, is computed as a function of the ramp rate. For high levels of stress, the delay exhibits a non-monotonic dependence on the ramp rate, indicating that there is an {\it optimum} ramp rate to achieve the shortest delay. For constant ramp rate, the delay initially decreases with increasing stress but then saturates showing that the trade-off between the delay and the stress (or the energy dissipated in switching) becomes less and less favorable with increasing stress. All of these features are due to a complex interplay between the in-plane and out-of-plane dynamics of the magnetization vector induced by stress

Analysis Of Measured Transport Properties Of Domain Walls In Magnetic Nanowires And Films

Existing data for soft magnetic materials of critical current for domain-wall motion, wall speed driven by a magnetic field, and wall electrical resistance, show that all three observable properties are related through a single parameter: the wall mobility $\mu$. The reciprocal of $\mu$ represents the strength of viscous friction between domain wall and conduction-electron gas. And $\mu$ is a function of the wall width, which depends in turn on the aspect ratio t/w, where t and w are the thickness and width of the sample. Over four orders of magnitude of $\mu$, the data for nanowires show $\mu\propto (t/w)^{-2.2}$. This dependence is in approximate agreement with the prediction of the 1984 Berger theory based on s-d exchange. On the other hand, it is inconsistent with the prediction of the 2004 Tatara and Kohno theory, and of the 2004 Zhang and Li theory.Comment: 7 pages, 1 figure; submitted to Phys. Rev.

Giant Antiferromagnetically Coupled Moments in a Molecule-Based Magnet with Interpenetrating Lattices

The molecule-based magnet [Ru$_2$(O$_2$CMe)$_4$]$_3$[Cr(CN)$_6$] contains two weakly-coupled, interpenetrating sublattices in a body-centered cubic structure. Although the field-dependent magnetization indicates a metamagnetic transition from an antiferromagnet to a paramagnet, the hysteresis loop also exhibits a substantial magnetic remanance and coercive field uncharacteristic of a typical metamagnet. We demonstrate that this material behaves like two giant moments with a weak antiferromagnetic coupling and a large energy barrier between the orientations of each moment. Because the sublattice moments only weakly depend on field in the transition region, the magnetic correlation length can be directly estimated from the magnetization.Comment: 3 figure

Measurements of thermodynamic and transport properties of EuC2_2: a low-temperature analogue of EuO

EuC$_2$ is a ferromagnet with a Curie-temperature of $T_C \simeq 15\,$K. It is semiconducting with the particularity that the resistivity drops by about 5 orders of magnitude on cooling through $T_C$, which is therefore called a metal-insulator transition. In this paper we study the magnetization, specific heat, thermal expansion, and the resistivity around this ferromagnetic transition on high-quality EuC$_2$ samples. At $T_C$ we observe well defined anomalies in the specific heat $c_p(T)$ and thermal expansion $\alpha(T)$ data. The magnetic contributions of $c_p(T)$ and $\alpha(T)$ can satisfactorily be described within a mean-field theory, taking into account the magnetization data. In zero magnetic field the magnetic contributions of the specific heat and thermal expansion fulfill a Gr\"uneisen-scaling, which is not preserved in finite fields. From an estimation of the pressure dependence of $T_C$ via Ehrenfest's relation, we expect a considerable increase of $T_C$ under applied pressure due to a strong spin-lattice coupling. Furthermore the influence of weak off stoichiometries $\delta$ in EuC$_{2 \pm \delta}$ was studied. It is found that $\delta$ strongly affects the resistivity, but hardly changes the transition temperature. In all these aspects, the behavior of EuC$_2$ strongly resembles that of EuO.Comment: 7 pages, 6 figure

Ultrafast Magneto-Acoustics in Nickel Films

We report about the existence of magneto-acoustic pulses propagating in a 200-nm-thick ferromagnetic nickel film excited with 120 fs laser pulses. They result from the coupling between the magnetization of the ferromagnetic film and the longitudinal acoustic waves associated to the propagation of the lattice deformation induced by the femtosecond laser pulses. The magneto-acoustic pulses are detected from both the front and back sides of the film, using the time-resolved magneto-optical Kerr technique, measuring both the time dependent rotation and ellipticity. We show that the propagating acoustic pulse couples efficiently to the magnetization and is strong enough to induce a precession of the magnetization. It is due to a transient change of the crystalline anisotropy associated to the lattice deformation. It is shown that the results can be interpreted by combining the concepts of acoustic pulse propagation and ultrafast magnetization dynamics.Comment: 4 pages, 3 figures, Submitted to Physical Review Letters on November 30th 201

Anisotropic magnetoresistance of bulk carbon nanotube sheets

We have measured the magnetoresistance of stretched sheets of carbon nanotubes in temperatures ranging from 2 K to 300 K and in magnetic fields up to 9 T, oriented either perpendicular or parallel to the plane of the sheets. The samples have been partially aligned by post-fabrication stretching, such that the direction of stretching was either parallel or perpendicular to the direction of applied electric current. We have observed large differences between the magnetoresistance measured under the two field orientations, most pronounced at the lowest temperatures, highest fields, and for the laterally-aligned sample. Treatment of the sheets with nitric acid affects this anisotropy. We analyzed the results within the theoretical framework of weak and strong localization and concluded that the anisotropy bears the mark of a more unusual phenomenon, possibly magnetically-induced mechanical strain.Comment: 34 pages, 10 figure

Acoustically driven ferromagnetic resonance

Surface acoustic waves (SAW) in the GHz frequency range are exploited for the all-elastic excitation and detection of ferromagnetic resonance (FMR) in a ferromagnetic/ferroelectric (nickel/lithium niobate) hybrid device. We measure the SAW magneto-transmission at room temperature as a function of frequency, external magnetic field magnitude, and orientation. Our data are well described by a modified Landau-Lifshitz-Gilbert approach, in which a virtual, strain-induced tickle field drives the magnetization precession. This causes a distinct magnetic field orientation dependence of elastically driven FMR that we observe in both model and experiment.Comment: 4 page

Fundamental Magnetic Properties and Structural Implications for Nanocrystalline Fe-Ti-N Thin Films

The magnetization (M) as a function of temperature (T) from 2 to 300 K and in-plane field (H) up to 1 kOe, room temperature easy and hard direction in-plane field hysteresis loops for fields between -100 and +100 Oe, and 10 GHz ferromagnetic resonance (FMR) profiles have been measured for a series of soft-magnetic nano-crystalline 50 nm thick Fe-Ti-N films made by magnetron sputtering in an in-plane field. The nominal titanium concentration was 3 at. % and the nitrogen concentrations (xN) ranged from zero to 12.7 at. %. The saturation magnetization (Ms) vs. T data and the extracted exchange parameters as a function of xN are consistent with a lattice expansion due to the addition of interstitial nitrogen in the body-centered-cubic (bcc) lattice and a structural transition to body-centered-tetragonal (bct) in the 6-8 at. % nitrogen range. The hysteresis loop and FMR data show a consistent picture of the changes in both the uniaxial and cubic anisotropy as a function of xN. Films with xN > 1.9 at. % show an overall uniaxial anisotropy, with an anisotropy field parameter Hu that increases with xN. The corresponding dispersion averaged uniaxial anisotropy energy density parameter = HuMs/2 is a linear function of xN, with a rate of increase of 950 erg/cm3 per at. % nitrogen. The estimated uniaxial anisotropy energy per nitrogen atom is 30 J/mol, a value consistent with other systems. For xN below 6 at. %, the scaling of coercive force Hc data with the sixth power of the grain size D indicate a grain averaged effective cubic anisotropy energy density parameter that is about an order of magnitude smaller that the nominal K1 values for iron, and give a quantitative vs. D response that matches predictions for exchange coupled random grains with cubic anisotropy.Comment: 13 pages, 7 figure