Laser powder bed fusion of a superelastic Cu-Al-Mn shape memory alloy

Dense and crack-free specimens of the shape memory alloy Cu71.6Al17Mn11.4 (at.%) were produced via laser powder bed fusion across a wide range of process parameters. The microstructure, viz. grain size, can be directly tailored within the process and with it the transformation temperatures (TTs) shifted to higher values by raising the energy input. The microstructure, and the superelastic behavior of additively manufactured samples were assessed by a detailed comparison with induction melted material. The precipitation of the α phase, which inhibit the martensitic transformation, were not observed in the additively manufactured samples owing to the high intrinsic cooling rates during the fabrication process. Fine columnar grains with a strong [001]-texture along the building direction lead to an enhanced yield strength compared to the coarse-grained cast samples. A maximum recoverable strain of 2.86% was observed after 5% compressive loading. The first results of our approach imply that laser powder bed fusion is a promising technique to directly produce individually designed Cu-Al-Mn shape memory parts with a pronounced superelasticity at room temperature

Phase Formation, Thermal Stability and Mechanical Properties of a Cu-Al-Ni-Mn Shape Memory Alloy Prepared by Selective Laser Melting

Selective laser melting (SLM) is an additive manufacturing process used to produce parts with complex geometries layer by layer. This rapid solidification method allows fabricating samples in a non-equilibrium state and with refined microstructure. In this work, this method is used to fabricate 3 mm diameter rods of a Cu-based shape memory alloy. The phase formation, thermal stability and mechanical properties were investigated and correlated. Samples with a relative density higher than 92% and without cracks were obtained. A single monoclinic martensitic phase was formed with average grain size ranging between 28 to 36 μm. The samples exhibit a reverse martensitic transformation temperature around 106 ± 2 °C and a large plasticity in compression (around 15±1%) with a typical “double-yielding” behaviour

SUN EXPOSURE AND PHOTOPROTECTION HABITS EVALUATION OF HIGH SCHOOL STUDENTS AT ENIO PIPINO PUBLIC SCHOOL IN SINOP-MT

The aim of this work was to assess the sun exposure and photoprotection habits of high school students at Enio Pipino Public School in Sinop-MT. 140 surveys were answered by high school students from the urban area of Sinop-MT. From all the interviewed students, 42,14% were male, and 57,85% female, 63 students declared themselves brown, 53 white, and 42 black. Most of the students declared that they are exposed to sun for at least two hours weekly, and 60% of them between 10am and 3pm. Only 26,42% of the students wear sunscreen during the day, and from those, 8,57% re-apply the product, 52,85% of the students declared no knowledge about SPF. Most of the students do not use physical methods of protection although they assume to be aware about the damages caused by solar radiation expodure, and 13 of them declared to have skin cancer incidence in their families. Analyzing the results, it was possible to identify the studied population vulnerability about the risks of sun radiation exposure and it was also seen that there are very less attitudes for the self health care. It is remarkable yet the need of sun exposure habits changes, according to the time, frequency, and timing of exposur

Co-processing Plant Extracts for Improvement of Their Pharmacotechnic Properties

<p><span><strong>ABSTRACT: </strong>The herbal Espinheira Santa (Maytenus ilicifolia) can ingested in capsules for treatment of injuries from digestive tract, such as gastritis. However, the large amount of drug administered dose medication adherence difficult, so this study sought an alternative by formulating effervescent granules facilitating drug intake. The obtained granules made by wet and effervescent mixture of citric acid, sodium carbonate and sodium bicarbonate at different concentrations, totaling eight formulations, in addition to lactose as diluent and disintegrant in the composition. The granules were produced in sizes from 1 and 2mm. Rheological tests were compared against the dry extract, analyzed the average particle sizes of beads, mapped its surface by scanning electron microscopy and evaluated their behavior effervescent. The flow properties of the granules showed better values than the dry extract. The co-processed formulations showed average particle sizes distributed closed, where 1mm time effervescence had smaller, respecting all formulations, pharmacopeial limits of maximum 5 minutes. The preparation of effervescent granules Espinheira Santa proved to be a good alternativel, once that have easy preparation, low cost, excellent flow and rapid disintegration.</span></p><p><span><strong>Keywords:</strong> Espinheira Santa, effervescent granules, dry extract.</span></p

Anaplastic large cell lymphoma (CD30+/Ki-1+): results of a prospective clinico-pathological study of 69 cases

Sixty-nine anaplastic large cell lymphomas (ALCLs) were selected from an Italian comparative trial on MACOP-B and F-MACHOP. As no significant difference in effectiveness of the protocols emerged, they were considered homogenously treated. The ALCLs were divided into two groups according to previously defined criteria: 41 were common type (ALCLs-CT) and 28 Hodgkin-related (ALCLs-HR). T-cell phenotype was most common(58%), while B-cell, null and hybrid forms accounted for 27%, 13% and 2%. Clinically, ALCLs CT and HR differed as to mean age (27 v 34.3 years) and presentation; all ALCLs-HR showed mediastinal involvement, with bulky disease in 57%, and more frequent occurrence in stage II, In contrast, ALCLs-CT showed mediastinal masses in 58.5%, infrequently revealed bulky disease (24%), and were not specifically associated to stage. Among the ALCLs-CT, 68.4% achieved complete remission (CR), 24.4% partial remission (PR), one (2.4%) was resistant to therapy, and two (4.8%) had fatal drug toxicity. Of the ALCLs-HR, 67.8% reached CR, 14.3% PR, and 17.9% did not respond. In CR, ALCLs-CT showed a greater tendency to relapse (32.1% v 14.2%). At present, 65.8% of ALCLs-CT and 67.8% of ALCLs-HR are alive with overall survival/disease-free survival averages of 31/27 and 29/24 months respectively. Our data emphasize that, independently of subtype, ALCLs benefit from the application of third-generation protocols for high-grade non-Hodgkin's lymphomas