Aerosol production and growth in the marine boundary layer

The dependence of cloud condensation nuclei (CCN) production on the marine dimethylsulfide (DMS) flux is modeled with a dynamic description of the gas, aerosol, and aqueous phase processes in a closed air parcel. The results support the conclusion reached in previous work with a steady state model that an approximately linear dependence exists between CCN concentration and DMS flux under typical remote marine conditions. This linearity does not hold for low DMS fluxes (the threshold is typically near 2.5 μmol m^(−2) day^(−1)) because the seasalt particles heterogeneously convert the available SO_2 to sulfate inhibiting the creation of new particles. The conditions under which this linear relationship holds are investigated by a series of sensitivity studies, focusing particular attention on the impact of the timing and frequency of cloud events. We consider the regimes of the model's semiempirical parameters, showing that the uncertainty associated with two such parameters, namely, the nucleation rate scaling factor and the sulfuric acid accommodation coefficient, is sufficient to change the predicted CCN production due to DMS from over 300 cm^(−3) day^(−1) to none. This sensitivity accounts for most of the range of results predicted by previous models of the DMS-CCN system

Importance of composition and hygroscopicity of BC particles to the effect of BC mitigation on cloud properties: Application to California conditions

Black carbon (BC) has many effects on climate including the direct effect on atmospheric absorption, indirect and semi-direct effects on clouds, snow effects, and others. While most of these are positive (warming), the first indirect effect is negative and quantifying its magnitude in addition to other BC feedbacks is important for supporting policies that mitigate BC. We use the detailed aerosol chemistry parcel model of Russell and Seinfeld (1998), observationally constrained by initial measured aerosol concentrations from five California sites, to provide simulated cloud drop number (CDN) concentrations against which two GCM calculations – one run at the global scale and one nested from the global-to-regional scale are compared. The GCM results reflect the combined effects of their emission inventories, advection schemes, and cloud parameterizations. BC-type particles contributed between 16 and 20% of cloud droplets at all sites even in the presence of more hygroscopic particles. While this chemically detailed parcel model result is based on simplified cloud dynamics and does not consider semi-direct or cloud absorption effects, the cloud drop number concentrations are similar to the simulations of both Chen et al. (2010b) and Jacobson (2010) for the average cloud conditions in California. Reducing BC particle concentration by 50% decreased the cloud droplet concentration by between 6% and 9% resulting in the formation of fewer, larger cloud droplets that correspond to a lower cloud albedo. This trend is similar to Chen et al. (2010b) and Jacobson (2010) when BC particles were modeled as hygroscopic. This reduction in CDN in California due to the decrease in activated BC particles supports the concern raised by Chen et al. (2010a) that the cloud albedo effect of BC particles has a cooling effect that partially offsets the direct forcing reduction if other warming effects of BC on clouds are unchanged. These results suggests that for regions like the California sites studied here, where BC mitigation targets fossil fuel sources, a critical aspect of the modeled reduction is the chemical composition and associated hygroscopicity of the BC particles removed as well as their relative contribution to the atmospheric particle concentrations

Method of measuring aerosol particles using automated mobility-classified aerosol detector

An aerosol detection system for measuring particle number distribution with respect to particle dimension in an aerosol sample. The system includes an alternating dual-bag sampler, a radially classified differential mobility analyzer, and a condensation nucleus counter. Pressure variations in sampling are compensated by feedback control of volumetric flow rates

Dust-wind interactions can intensify aerosol pollution over eastern China.

Eastern China has experienced severe and persistent winter haze episodes in recent years due to intensification of aerosol pollution. In addition to anthropogenic emissions, the winter aerosol pollution over eastern China is associated with unusual meteorological conditions, including weaker wind speeds. Here we show, based on model simulations, that during years with decreased wind speed, large decreases in dust emissions (29%) moderate the wintertime land-sea surface air temperature difference and further decrease winds by -0.06 (±0.05) m s-1 averaged over eastern China. The dust-induced lower winds enhance stagnation of air and account for about 13% of increasing aerosol concentrations over eastern China. Although recent increases in anthropogenic emissions are the main factor causing haze over eastern China, we conclude that natural emissions also exert a significant influence on the increases in wintertime aerosol concentrations, with important implications that need to be taken into account by air quality studies

Using the Web for Name Authority Work

While many catalogers are using the Web to find the information they need to perform authority work quickly and accurately, the full potential of the Web to assist catalogers in name authority work has yet to be realized. The ever-growing nature of the Web means that available information for creating personal name, corporate name, and other types of headings will increase. In this article, we examine ways in which simple and effective Web searching can save catalogers time and money in the process of authority work. In addition, questions involving evaluating authority information found on the Web are explored

Trajectory Mapping and Applications to Data from the Upper Atmosphere Research Satellite

The problem of creating synoptic maps from asynoptically gathered trace gas data has prompted the development of a number of schemes. Most notable among these schemes are the Kalman filter, the Salby-Fourier technique, and constituent reconstruction. This paper explores a new technique called trajectory mapping. Trajectory mapping creates synoptic maps from asynoptically gathered data by advecting measurements backward or forward in time using analyzed wind fields. A significant portion of this work is devoted to an analysis of errors in synoptic trajectory maps associated with the calculation of individual parcel trajectories. In particular, we have considered (1) calculational errors; (2) uncertainties in the values and locations of constituent measurements, (3) errors incurred by neglecting diabatic effects, and (4) sensitivity to differences in wind field analyses. These studies reveal that the global fields derived from the advection of large numbers of measurements are relatively insensitive to the errors in the individual trajectories. The trajectory mapping technique has been successfully applied to a variety of problems. In this paper, the following two applications demonstrate the usefulness of the technique: an analysis of dynamical wave-breaking events and an examination of Upper Atmosphere Research Satellite data accuracy

Hygroscopic Behavior of NaCl-Bearing Natural Aerosol Particles Using Environmental Transmission Electron Microscopy

We used conventional and environmental transmission electron microscopes to determine morphology, composition, and water uptake of individual natural inorganic aerosol particles collected from industrial pollution plumes and from clean and polluted marine environments. Five particle types are described in detail. They range from relatively insoluble mineral grains to internally mixed particles containing NaCl with other soluble or relatively insoluble material. We studied the hygroscopic behavior of these particles from 0 to 100% relative humidity (RH). Relatively insoluble materials do not take up water over the experimental RH range. Single crystals of NaCl from both natural and laboratory sources have a well-defined deliquescence point of approximately 76% RH at 291 K. NaCl-bearing aggregate particles appear to deliquesce between 74 and 76% RH (same RH within error) when NaCl is internally mixed with relatively insoluble phases, but the particles deliquesce at lower RH when aggregated with other soluble phases such as NaNO3. For all NaCl-bearing particles studied, hygroscopic growth is pronounced above 76% RH, and water uptake by the particles is dominated by the soluble phase. Furthermore, the soluble phase initiating deliquescence controls the locus of further hygroscopic growth of the aggregate particle. Our results demonstrate that composition and mixing state affect water uptake of natural aerosol particles. Furthermore, internally mixed particles are confirmed to deliquesce at lower RH values than predicted from the individual components

The relationship between DMS flux and CCN concentration in remote marine regions

The relationship between the steady state cloud condensation nuclei (CCN) concentration and the dimethylsulfide (DMS) emission flux in remote marine regions is investigated by modeling the principal gas-, aerosol-, and aqueous-phase processes in the marine boundary layer (MBL). Results are in reasonable quantitative agreement with the available measurements of DMS, SO_2, H_2SO_4, CCN, and condensation nuclei (CN) concentrations in remote marine regions of the globe and suggest that indeed DMS plays a major role in the particle dynamics of the MBL. For sufficiently low DMS fluxes practically all the SO_2 produced by DMS photooxidation is predicted to be heterogeneously converted to sulfate in sea-salt aerosol particles. For DMS fluxes higher than approximately 2.5 μmole m^(−2)d^(−1) a linear relationship is found to exist between the CCN number concentration and the DMS flux

Automated mobility-classified-aerosol detector

An aerosol detection system for measuring particle number distribution with respect to particle dimension in an aerosol sample. The system includes an alternating dual-bag sampler, a radially classified differential mobility analyzer, and a condensation nucleus counter. Pressure variations in sampling are compensated by feedback control of volumetric flow rates using a plurality of flow control elements