42,252 research outputs found
Household technology acceptance heterogeneity in computer adoption
Technology policy analysis and implementation relies on knowledge and understanding of the "adoption gap" in information technologies among different groups of consumers. Factors that explain the residential "digital divide" also need to be identified and quantified. Through the application of survey data we provide an enhanced understanding of the key factors involved in the choice of residential computer adoption. These choices are analysed using a discrete choice model that reveals that sociodemographic factors strongly influence the adoption of the residential computer. Moreover, we apply the basic findings of the Technology Adoption Model (TAM) into the discrete choice framework heteroscedastically to deepen our understanding of why some households choose not to have computers; above and beyond what may be explained by socio-demography alone. Generally, we find that computer adoption is sensitive to household digital division measures and that the model fit improves with the heteroscedastic addition of the TAM factors. These findings are important for market planners and policymakers who wish to understand and quantify the impact of these factors on the digital divide across different household types, as defined by the TAM model
Pyroelectric detector arrays
A pyroelectric detector array and the method for using it are described. A series of holes formed through a silicon dioxide layer on the surface of a silicon substrate forms the mounting fixture for the pyroelectric detector array. A series of nontouching strips of indium are formed around the holes to make contact with the backside electrodes and form the output terminals for individual detectors. A pyroelectric detector strip with front and back electrodes, respectively, is mounted over the strips. Biasing resistors are formed on the surface of the silicon dioxide layer and connected to the strips. A metallized pad formed on the surface of layer is connected to each of the biasing resistors and to the film to provide the ground for the pyroelectric detector array
Synchronizing Sequencing Software to a Live Drummer
Copyright 2013 Massachusetts Institute of Technology. MIT allows authors to archive published versions of their articles after an embargo period. The article is available at
Quantum Information Paradox: Real or Fictitious?
One of the outstanding puzzles of theoretical physics is whether quantum
information indeed gets lost in the case of Black Hole (BH) evaporation or
accretion. Let us recall that Quantum Mechanics (QM) demands an upper limit on
the acceleration of a test particle. On the other hand, it is pointed out here
that, if a Schwarzschild BH would exist, the acceleration of the test particle
would blow up at the event horizon in violation of QM. Thus the concept of an
exact BH is in contradiction of QM and quantum gravity (QG). It is also
reminded that the mass of a BH actually appears as an INTEGRATION CONSTANT of
Einstein equations. And it has been shown that the value of this integration
constant is actually zero. Thus even classically, there cannot be finite mass
BHs though zero mass BH is allowed. It has been further shown that during
continued gravitational collapse, radiation emanating from the contracting
object gets trapped within it by the runaway gravitational field. As a
consequence, the contracting body attains a quasi-static state where outward
trapped radiation pressure gets balanced by inward gravitational pull and the
ideal classical BH state is never formed in a finite proper time. In other
words, continued gravitational collapse results in an "Eternally Collapsing
Object" which is a ball of hot plasma and which is asymptotically approaching
the true BH state with M=0 after radiating away its entire mass energy. And if
we include QM, this contraction must halt at a radius suggested by highest QM
acceleration. In any case no EH is ever formed and in reality, there is no
quantum information paradox.Comment: 8 pages in Pramana Style, 6 in Revtex styl
Associations between health and different types of environmental incivility : a Scotland-wide study
Objectives: Concern about the impact of the environment on health and well being has tended to focuson the physical effects of exposure to toxic and infectious substances, and on the impact of large scale infrastructures. Less attention has been paid to the possible psychosocial consequences of people's subjective perceptions of their everyday, street level environment, such as the incidence of litter and graffiti. As little is known about the potential relative importance for health of perceptions of different types of environmental incivility, a module was developed for inclusion in the 2004 Scottish Social Attitudes survey in order to investigate this relationship. Study design: A random sample of 1637 adults living across a range of neighbourhoods throughout Scotland was interviewed. Methods: Respondents were asked to rate their local area on a range of possible environmental incivilities. These incivilities were subsequently grouped into three domains: (i) street level incivilities (e.g. litter, graffiti); (ii) large scale infrastructural incivilities (e.g. telephone masts); and (iii) the absence of environmental goods (e.g. safe play areas for children). For each of the three domains, the authors examined the degree to which they were thought to pose a problem locally, and how far these perceptions varied between those living in deprived areas and those living in less deprived areas. Subsequently, the relationships between these perceptions and self assessed health and health behaviours were explored, after controlling for gender, age and social class. Results: Respondents with the highest levels of perceived street level incivilities were almost twice aslikely as those who perceived the lowest levels of street level incivilities to report frequent feelings of anxiety and depression. Perceived absence of environmental goods was associated with increased anxiety (2.5 times more likely) and depression (90% more likely), and a 50% increased likelihood of being a smoker. Few associations with health were observed for perceptions of large scale infrastructural incivilities. Conclusions: Environmental policy needs to give more priority to reducing the incidence of street levelincivilities and the absence of environmental goods, both of which appear to be more important for health than perceptions of large scale infrastructural incivilities
Alternative Adaptive Filter Structures for Improved Radio Frequency Interference Cancellation in Radio Astronomy
In radio astronomy, reference signals from auxiliary antennas that receive
only the radio frequency interference (RFI) can be modified to model the RFI
environment at the astronomy receivers. The RFI can then be canceled from the
astronomy signal paths. However, astronomers typically only require signal
statistics. If the RFI statistics are changing slowly, the cancellation can be
applied to the signal correlations at a much lower rate than is required for
standard adaptive filters. In this paper we describe five canceler setups;
precorrelation and postcorrelation cancelers that use one or two reference
signals in different ways. The theoretical residual RFI and added noise levels
are examined and are demonstrated using microwave television RFI at the
Australia Telescope Compact Array. The RFI is attenuated to below the system
noise, a reduction of at least 20 dB. While dual-reference cancelers add more
reference noise than single-reference cancelers, this noise is zero-mean and
only adds to the system noise, decreasing the sensitivity. The residual RFI
that remains in the output of single-reference cancelers (but not
dual-reference cancelers) sets a nonzero noise floor that does not act like
random system noise and may limit the achievable sensitivity. Thus,
dual-reference cancelers often result in superior cancellation. Dual-reference
precorrelation cancelers require a double-canceler setup to be useful and to
give equivalent results to dual-reference postcorrelation cancelers.Comment: 11 pages created using emulateap
Sustainability, transport and design: reviewing the prospects for safely encouraging eco-driving
Private vehicle use contributes a disproportionately large amount to the degradation of the environment we inhabit. Technological advancement is of course critical to the mitigation of climate change, however alone it will not suffice; we must also see behavioural change. This paper will argue for the application of Ergonomics to the design of private vehicles, particularly low-carbon vehicles (e.g. hybrid and electric), to encourage this behavioural change. A brief review of literature is offered concerning the effect of the design of a technological object on behaviour, the inter-related nature of goals and feedback in guiding performance, the effect on fuel economy of different driving styles, and the various challenges brought by hybrid and electric vehicles, including range anxiety, workload and distraction, complexity, and novelty. This is followed by a discussion on the potential applicability of a particular design framework, namely Ecological Interface Design, to the design of in-vehicle interfaces that encourage energy-conserving driving behaviours whilst minimising distraction and workload, thus ensuring safety
Entrepreneurs'' attitude towards the computer and its effect on e-business adoption
This paper presents research exploring further the concept that many SMEs do not adopt computer based technologies due to decision maker's negative attitudes towards computers generally. Importantly, by assessing the entrepreneur's belief structure, we provide quantitative evidence how SMEs, particularly micros, are affected. Earlier research that addresses technology acceptance model (TAM) suggests that TAM parameters are particularly influential factors of e-commerce adoption, as perceived by top managers of SMEs. The model we develop is tested using a sample of 655 enterprises. The information was gathered, via a telephone survey of UK SMEs, from decisions makers in the enterprise. Technically, the paper uses k-means cluster analysis to segment respondents using the TAM perceptions, ease of use, usefulness and enjoyment. Based on two determined segments we look at the differential rate of adoption of internet, and the potential adoption of new e-collaborative technologies like video conferencing and electronic whiteboards. The diffusion of internet for low IT utility (LIT) segments was considerably slower than in the high utility segment (HIT). Similarly, the anticipated adoption of e-collaboration technologies was much lower for LIT than HIT. Interestingly, we find that LIT is populated by more micro SMEs than HIT. The results we present are limited however as our sample is considerably underweight in micro SMEs, suggesting that the problem may be much larger in the economy than our model predicts. For policy makers, this research confirms the value of knowledge transfer programs to SMEs in the form of technology support. Our research shows that organisations which have dedicated IT support will tend to be more advanced technologically than those that do not. The implication for entrepreneurs is if they can be persuaded that a technological route is beneficial to them, and that suitable support can be provided via KT, then operational efficiency gains could be made. This paper contributes to knowle
The search for innovators and early adopters of e-collaborative technologies within small and medium sized enterprises in the UK
New product diffusion theory predicts that innovators and early adopters are critical to the success of new innovations. The rate at which enterprises adopt e-Science technologies must therefore rely upon reliable market intelligence so that the critical early stages of adoption are successfully navigated by developers and planners. Failure to understand attitudes towards new technologies can lead to even useful technologies being under-adopted. This paper applies a survey based methodology to develop estimates of demand for web based virtual Collaborative technologies. We show that approximately 76% of the 1029 firms that we interviewed are technologically ready to deploy these technologies. We also show that 10% of all firms are ready look at these technologies as solutions to collaborative problem solving
Squeezing out the last 1 nanometer of water: A detailed nanomechanical study
In this study, we present a detailed analysis of the squeeze-out dynamics of
nanoconfined water confined between two hydrophilic surfaces measured by
small-amplitude dynamic atomic force microscopy (AFM). Explicitly considering
the instantaneous tip-surface separation during squeezeout, we confirm the
existence of an adsorbed molecular water layer on mica and at least two
hydration layers. We also confirm the previous observation of a sharp
transition in the viscoelastic response of the nanoconfined water as the
compression rate is increased beyond a critical value (previously determined to
be about 0.8 nm/s). We find that below the critical value, the tip passes
smoothly through the molecular layers of the film, while above the critical
speed, the tip encounters "pinning" at separations where the film is able to
temporarily order. Pre-ordering of the film is accompanied by increased force
fluctuations, which lead to increased damping preceding a peak in the film
stiffness once ordering is completed. We analyze the data using both
Kelvin-Voigt and Maxwell viscoelastic models. This provides a complementary
picture of the viscoelastic response of the confined water film
- …