A convergent image configuration for DEM extraction that minimises the systematic effects caused by an inaccurate lens model

The internal geometry of consumer grade digital cameras is generally considered unstable. Research conducted recently at Loughborough University indicated the potential of these sensors to maintain their internal geometry. It also identified residual systematic error surfaces or “domes”, discernible in digital elevation models (DEMs) (Wackrow et al., 2007), caused by slightly inaccurate estimated lens distortion parameters. This paper investigates these systematic error surfaces and establishes a methodology to minimise them. Initially, simulated data were used to ascertain the effect of changing the interior orientation parameters on extracted DEMs, specifically the lens model. Presented results demonstrate the relationship between “domes” and inaccurately specified lens distortion parameters. The stereopair remains important for data extraction in photogrammetry, often using automated DEM extraction software. The photogrammetric normal case is widely used, in which the camera base is parallel to the object plane and the optical axes of the cameras intersect the object plane orthogonally. During simulation, the error surfaces derived from extracted DEMs using the normal case, were compared with error surfaces created using a mildly convergent geometry. In contrast to the normal case, the optical camera axes intersect the object plane at the same point. Results of the simulation process clearly demonstrate that a mildly convergent camera configuration eradicates the systematic error surfaces. This result was confirmed through practical tests and demonstrates that mildly convergent imagery effectively improves the accuracies of DEMs derived with this class of sensor

Influence of blur on feature matching and a geometric approach for photogrammetric deblurring

Unmanned aerial vehicles (UAV) have become an interesting and active research topic for photogrammetry. Current research is based on images acquired by a UAV, which have a high ground resolution and good spectral and radiometric resolution, due to the low flight altitudes combined with a high resolution camera. UAV image flights are also cost efficient and have become attractive for many applications including change detection in small scale areas. One of the main problems preventing full automation of data processing of UAV imagery is the degradation effect of blur caused by camera movement during image acquisition. This can be caused by the normal flight movement of the UAV as well as strong winds, turbulence or sudden operator inputs. This blur disturbs the visual analysis and interpretation of the data, causes errors and can degrade the accuracy in automatic photogrammetric processing algorithms. The aim of this research is to develop a blur correction method to deblur UAV images. Deblurring of images is a widely researched topic and often based on the Wiener or Richardson-Lucy deconvolution, which require precise knowledge of both the blur path and extent. Even with knowledge about the blur kernel, the correction causes errors such as ringing, and the deblurred image appears "muddy" and not completely sharp. In the study reported in this paper, overlapping images are used to support the deblurring process, which is advantageous. An algorithm based on the Fourier transformation is presented. This works well in flat areas, but the need for geometrically correct sharp images may limit the application. Deblurring images needs to focus on geometric correct deblurring to assure geometric correct measurements

Automatic isolation of blurred images from UAV image sequences

Unmanned aerial vehicles (UAV) have become an interesting and active research topic for photogrammetry. Current research is based on images acquired by an UAV, which have a high ground resolution and good spectral and radiometrical resolution, due to the low flight altitudes combined with a high resolution camera. UAV image flights are also cost effective and have become attractive for many applications including change detection in small scale areas. One of the main problems preventing full automation of data processing of UAV imagery is the degradation effect of blur caused by camera movement during image acquisition. This can be caused by the normal flight movement of the UAV as well as strong winds, turbulence or sudden operator inputs. This blur disturbs the visual analysis and interpretation of the data, causes errors and can degrade the accuracy in automatic photogrammetric processing algorithms. The detection and removal of these images is currently achieved manually, which is both time consuming and prone to error, particularly for large image-sets. To increase the quality of data processing an automated filtering process is necessary, which must be both reliable and quick. This paper describes the development of an automatic filtering process, which is based upon the quantification of blur in an image. A “shaking table” was used to create images with known blur during a series of laboratory tests. This platform can be moved in one direction by a mathematical function controlled by a defined frequency and amplitude. The shaking table was used to displace a Nikon D80 digital SLR camera with a user defined frequency and amplitude. The actual camera displacement was measured accurately and exposures were synchronized, which provided the opportunity to acquire images with a known blur effect. Acquired images were processed digitally to determine a quantifiable measure of image blur, which has been created by the actual shaking table function. Once determined for a sequence of images, a user defined threshold can be used to differentiate between “blurred” and "acceptable" images. A subsequent step is to establish the effect that blurred images have upon the accuracy of subsequent measurements. Both of these aspects will be discussed in this paper and future work identified

UAV image blur – its influence and ways to correct it

Unmanned aerial vehicles (UAVs) have become an interesting and active research topic in photogrammetry. Current research is based on image sequences acquired by UAVs which have a high ground resolution and good spectral resolution due to low flight altitudes combined with a high-resolution camera. One of the main problems preventing full automation of data processing of UAV imagery is the unknown degradation effect of blur caused by camera movement during image acquisition. The purpose of this paper is to analyse the influence of blur on photogrammetric image processing, the correction of blur and finally, the use of corrected images for coordinate measurements. It was found that blur influences image processing significantly and even prevents automatic photogrammetric analysis, hence the desire to exclude blurred images from the sequence using a novel filtering technique. If necessary, essential blurred images can be restored using information of overlapping images of the sequence or a blur kernel with the developed edge shifting technique. The corrected images can be then used for target identification, measurements and automated photogrammetric processing

Automatic detection of blurred images in UAV image sets

Unmanned aerial vehicles (UAV) have become an interesting and active research topic for photogrammetry. Current research is based on images acquired by an UAV, which have a high ground resolution and good spectral and radiometrical resolution, due to the low flight altitudes combined with a high resolution camera. UAV image flights are also cost effective and have become attractive for many applications including, change detection in small scale areas. One of the main problems preventing full automation of data processing of UAV imagery is the degradation effect of blur caused by camera movement during image acquisition. This can be caused by the normal flight movement of the UAV as well as strong winds, turbulence or sudden operator inputs. This blur disturbs the visual analysis and interpretation of the data, causes errors and can degrade the accuracy in automatic photogrammetric processing algorithms. The detection and removal of these images is currently achieved manually, which is both time consuming and prone to error, particularly for large image-sets. To increase the quality of data processing an automated process is necessary, which must be both reliable and quick. This paper describes the development of an automatic filtering process, which is based upon the quantification of blur in an image. Images with known blur are processed digitally to determine a quantifiable measure of image blur. The algorithm is required to process UAV images fast and reliably to relieve the operator from detecting blurred images manually. The newly developed method makes it possible to detect blur caused by linear camera displacement and is based on human detection of blur. Humans detect blurred images best by comparing it to other images in order to establish whether an image is blurred or not. The developed algorithm simulates this procedure by creating an image for comparison using image processing. Creating internally a comparable image makes the method independent of additional images. However, the calculated blur value named SIEDS (saturation image edge difference standard-deviation) on its own does not provide an absolute number to judge if an image is blurred or not. To achieve a reliable judgement of image sharpness the SIEDS value has to be compared to other SIEDS values from the same dataset. The speed and reliability of the method was tested using a range of different UAV datasets. Two datasets will be presented in this paper to demonstrate the effectiveness of the algorithm. The algorithm proves to be fast and the returned values are optically correct, making the algorithm applicable for UAV datasets. Additionally, a close range dataset was processed to determine whether the method is also useful for close range applications. The results show that the method is also reliable for close range images, which significantly extends the field of application for the algorithm

Geometric consistency and stability of consumer-grade digital cameras for accurate spatial measurement

It is known that uncertain internal geometry of consumer-grade digital cameras limits the accuracy of data that can be extracted. These cameras can be calibrated, but the validity of calibration data over a period of time should be carefully assessed before subsequent photogrammetric measurement. This paper examines the geometric stability and manufacturing consistency of a typical low-cost digital camera (Nikon Coolpix 5400) by estimating the degree of similarity between interior orientation parameters (IOP), established over a oneyear period. Digital elevation models (DEMs) are extracted with differing interior orientation parameters (IOP) sets and accuracies are compared using data obtained from seven identical cameras. An independent self-calibrating bundle adjustment (GAP) and the Leica Photogrammetry Suite (LPS) software were used to provide these datasets. Results are presented that indicate the potential of these cameras to maintain their internal geometry in terms of temporal stability and manufacturing consistency. This study also identifies residual systematic error surfaces or “domes”, discernible in “DEMs of difference”. These are caused by slightly inaccurately estimated lens distortion parameters, which effectively constrain the accuracies achievable with this class of sensor

Parameterising internal camera geometry with focusing distance

A study on the variation of internal camera geometry (principal distance, principal point position and lens distortion parameters) with different focus distances has been conducted. Results demonstrate that variations of parameters are continuous and predictable, allowing a new way to describe internal camera geometry. The classical constant parameters, c, x p , y p , K 1 , K 2 , P 1 and P 2 , are replaced by continuous functions, c(γ), x p (γ), y p (γ), K 1 (γ), K 2 (γ), P 1 (γ) and P 2 (γ), where γ is a variable describing the focus position. Incorporation of γ as a metadata tag (for example, Exif header) of a photograph jointly with a parameterised definition of camera geometry would allow full use of the autofocus camera function; enabling maximum effective depth of field, better match of the plane of focus with the object’s position and higher reliability. Additionally, conducted tests suggest the parameterised definition of internal geometry could help to locate and correct linear dependences between adjusted parameters, potentially improving the precision and accuracy of calibration

Morphological measurement using close range digital photogrammetry-guidance from ISPRS V6

The revolution in digital camera technology has provided Earth Scientists with new opportunities for spatial measurement. High-resolution sensors at ever reducing costs, combined with software increasingly marketed as "easy-to-use", has tempted a new generation of physical geographers and geomorphologist to consider using digital photogrammetry. This trend, combined with the parallel revolution in terrestrial laser scanning technology, has allowed Earth Scientists to carry out their own spatial data acquisition, with some notable successes. The International Society of Photogrammetry and Remote Sensing (ISPRS) recognises this trend and has established Working Group V6 to provide an international focus for close range measurement for the earth sciences (http://isprsv6.lboro.ac.uk/). The fear is that many new users may be disappointed with initial results, often the result of inexperience and not limitations of the science of photogrammetry. This paper therefore provides basic guidance to allow new users to carry out photogrammetric surveys with a higher degree of confidence and hopefully increased success. It covers aspects relating to camera and lens selection, camera calibration, photo acquisition, photo control requirements and issues relating to data processing. The material represents the combined expertise of 85 members from across the world, particularly the detailed and combined contributions from the named authors

Cultural heritage recording utilising low-cost close-range photogrammetry

Cultural heritage is under a constant threat of damage or even destruction and comprehensive and accurate recording is necessary to attenuate the risk of losing heritage or serve as basis for reconstruction. Cost effective and easy to use methods are required to record cultural heritage, particularly during a world recession, and close-range photogrammetry has proven potential in this area. Off-the-shelf digital cameras can be used to rapidly acquire data at low cost, allowing non-experts to become involved. Exterior orientation of the camera during exposure ideally needs to be established for every image, traditionally requiring known coordinated target points. Establishing these points is time consuming and costly and using targets can be often undesirable on sensitive sites. MEMS-based sensors can assist in overcoming this problem by providing small-size and low-cost means to directly determine exterior orientation for close-range photogrammetry. This paper describes development of an image-based recording system, comprising an off-the-shelf digital SLR camera, a MEMS-based 3D orientation sensor and a GPS antenna. All system components were assembled in a compact and rigid frame that allows calibration of rotational and positional offsets between the components. The project involves collaboration between English Heritage and Loughborough University and the intention is to assess the system’s achievable accuracy and practicability in a heritage recording environment. Tests were conducted at Loughborough University and a case study at St. Catherine’s Oratory on the Isle of Wight, UK. These demonstrate that the data recorded by the system can indeed meet the accuracy requirements for heritage recording at medium accuracy (1-4cm), with either a single or even no control points. As the recording system has been configured with a focus on low-cost and easy-to-use components, it is believed to be suitable for heritage recording by non-specialists. This offers the opportunity for lay people to become more involved in their local heritage, an important aspiration identified by English Heritage. Recently, mobile phones (smartphones) with integrated camera and MEMS-based orientation and positioning sensors have become available. When orientation and position during camera exposure is extracted, these phones establish offthe- shelf systems that can facilitate image-based recording with direct exterior orientation determination. Due to their small size and low-cost they have potential to further enhance the involvement of lay-people in heritage recording. The accuracy currently achievable will be presented also

Testing and application of a low-cost photogrammetric recording system suitable for cultural heritage recording

In the field of conservation, cost effective and easy to use methods are required to record cultural heritage and close-range photogrammetry has proved effective in this area. Off-theshelf digital cameras can be used to rapidly acquire data at low cost, allowing non-experts to become involved. Exterior orientation of the camera during exposure needs to be known for every image, traditionally requiring known coordinated target points. Establishing these points is time consuming and costly and using targets can be often undesirable. To overcome these problems a recording system is being developed that is capable of deriving the exterior orientation of a camera during exposure directly and cheaply. The system comprises an offthe- shelf digital SLR camera, a small-size 3D orientation sensor and a GPS antenna. All system components were assembled in a compact and rigid frame that allows calibration of the rotational and positional offsets between the components. The project involves collaboration between English Heritage and Loughborough University and the intention is to test the system at several heritage sites during 2010. It is expected that results from the first heritage site are presented at the conference; allowing assessment of the performance of the recording system, the stability of the calibration and the system’s practicability in a heritage recording environment. Intermediate results of the ongoing data analysis indicate that the data recorded by the system can indeed meet the accuracy requirements for heritage recording with either a single or even no control points. As the recording system has been configured with a focus on low-cost and easy-to-use components, it is believed to be suitable for heritage recording by non-specialists. This offers the opportunity for lay people to become more involved in their local heritage, an important aspiration identified by English Heritage