Laser-induced breakdown spectroscopy for studying the electrochemical impact of porosity variations in composite electrode materials

The porosity in composite electrode materials can vary on micro-and nanometer scale and has a great impact on electrochemical performance in lithium-ion cells. Liquid electrolyte has to penetrate into the entire porous electrodes in order to enable lithium-ion diffusion. For studying the electrochemical impact of porosity variations in composite lithium-nickel-manganese-cobalt-oxide thick films (Li(Ni 1/3 Mn 1/3 Co 1/3 )O 2 , NMC), laser-induced breakdown spectroscopy (LIBS) was applied. A rapid chemical screening of the complete electrode after electrochemical cycling and cell degradation was performed. This rather new technological approach was used to obtain post-mortem critical information about surface and bulk phenomena that define and control the performance of lithium-ion batteries. The influence of porosity variations along NMC electrode surfaces was studied regarding capacity retention, life-time, and lithium distribution. For this purpose, different geometrical arrangements of porosity distribution were generated by embossing. Using LIBS, elemental mapping of lithium was obtained with a lateral resolution of 100 μm. A correlation between porosity distribution, cell degradation and local lithium plating could be identified

Laser micro structuring of composite Li (Ni0.6Mn0.2Co0.2) O2cathode layersfor lithium-ion batteries

Lithium-ion batteries (LIB) using lithium nickel manganese cobalt oxide Li(Ni1/3Mn1/3Co1/3)O2, NMC-111) as cathode material have already become one of the most important types of mobile power sources due to their high gravimetric and volumetric capacity. Nevertheless, the automotive industry needs batteries with a further improved energy density to develop electric vehicles (EV) with comparable or even higher range than automobiles with ICE (Internal combustion engine). One approach to enhance the energy density is to increase the nickel content of the NMC cathode material. Therefore, NMC-622 cathodes were produced via tape casting containing 80 wt% of active material with a film thickness of 54 μm. The specific capacities were measured using galvanostatic measurements at different charging/discharging currents for cells with structured and unstructured electrodes. Laser-assisted generation of threedimensional architectures provides an increased active surface area to enhance interfacial kinetics with short lithium-ion diffusion paths. Ultrafast laser ablation was used in order to avoid a thermal-induced damage of the active material. It could be shown that laser structuring of electrode material leads to a significant improvement of the electrochemical performance, especially at high charging and discharging currents

Bacterial Adhesion on the Titanium and Stainless-Steel Surfaces Undergone Two Different Treatment Methods: Polishing and Ultrafast Laser Treatment

Bacterial adhesion has become a significant problem in many industries causing billions of dollars for its complicated removal treatment and maintenance. In this study, metal surfaces undergone treatment with ultrafast laser with varies power. The microstructure produced on its original surfaces were expected to prevent the adhesion of Escherichia coli (E. coli) ATCC 8739 and Staphylococcus aureus (S. aureus) ATCC 6838. The laser treatment was performed at 380 fs pulse duration, 515 µm central wavelength and a repetition rate of 200 kHz. Stainless steel AISI 316L was treated with an average laser power of 0.04 W (SS-0.04) and 0.11 W (SS-0.11), while Grade 5 titanium alloy was tested with high laser power 0.11 W (T-0.11). The adhesion was observed after 16 hours and the number of adhering bacteria was counted per cm2. The result achieved shows that, increasing the average laser power is leading to an enhanced S. aureus adhesion while E. coli adhesion is reduced which is due to the hydrophobicity interaction and difference in surface texture. Meanwhile, the laser treatment showed significant reduction of the bacterial adhesion on its surface compared to the polished surfaces. Thus, ultrafast laser texturing can be suggested as a promising method to reduce the bacterial adhesion, which reduced the adhesion of >80% for E. coli and >20% for S. aureus

APOE-dependent phenotypes in subjects with mild cognitive impairment converting to Alzheimer's disease

Background: The E4 isoform of the APOE genotype is the most significant genetic risk factor for sporadic Alzheimer's disease (AD) and has recently been found to modulate disease expression in patients with AD. Objective: To investigate APOE-dependent cognitive and structural phenotypes in subjects with mild cognitive impairment who converted to AD within the following three years. Methods: Subjects converting to AD (n = 63) were compared to a control group with stable mild cognitive impairment (n = 131). Clinical, neuropsychological, and MRI data were obtained by the German Dementia Competence Network. Subgroups of converting and stable APOE E4 carriers and non-carriers were investigated longitudinally with MRI to examine structural correlates of conversion. Voxel-based morphometry was applied to investigate gray matter distribution. Results: At baseline, executive performance correlated with global and bilateral prefrontal gray matter volume and predicted conversion only among non-carriers. Converting carriers and non-carriers presented distinct patterns of brain atrophy on longitudinal analysis, in line with a dissociation between more pronounced occipital atrophy in carriers and more frontoparietal volume loss in non-carriers at follow-up. Conclusions: The current findings suggest that in APOE E4 non-carriers with AD, executive dysfunction is closely linked to frontal gray matter atrophy and predictive of progression to dementia. The results are consistent with APOE genotype-dependent profiles of structural damage and cognitive decline in patients with imminent conversion to AD

Multicentre variability of MRI-based medial temporal lobe volumetry in Alzheimer's disease

Magnetic resonance imaging (MRI)-based volumetry of medial temporal lobe regions is among the best established biomarker candidates of Alzheimer's disease (AD) to date. This study assessed the effect of multicentre variability of MRI-based hippocampus and amygdala volumetry on the discrimination between patients with Alzheimer's disease (AD) and mild cognitive impairment (MCI) and on the association of morphological changes with ApoE4 genotype and cognition. We studied 113 patients with clinically probable AD and 150 patients with amnestic MCI using high-resolution MRI scans obtained at 12 clinical sites. We determined effect sizes of group discrimination and random effects linear models, considering multicentre variability. Hippocampus and amygdala volumes were significantly reduced in AD compared with MCI patients using data pooled across centres. Multicentre variability did not significantly affect the power to detect a volume difference between AD and MCI patients. Among cognitive measures, delayed recall of verbal and non-verbal material was significantly correlated with hippocampus and amygdala volumes. Amygdala and hippocampus volumes were not associated with ApoE4 genotype in AD or MCI. Our data indicate that multicentre acquisition of MRI data using manual volumetry is reliable and feasible for cross-sectional diagnostic studies, and they replicate essential findings from smaller scale monocentre studies