Ravuconazole self-emulsifying delivery system : in vitro activity against Trypanosoma cruzi amastigotes and in vivo toxicity.

Self-emulsifying drug delivery systems (SEDDSs) are lipid-based anhydrous formulations composed of an isotropic mixture of oil, surfactant, and cosurfactants usually presented in gelatin capsules. Ravuconazole (Biopharmaceutics Classification System [BCS] Class II) is a poorly water-soluble drug, and a SEDDS type IIIA was designed to deliver it in a predissolved state, improving dissolution in gastrointestinal fluids. After emulsification, the droplets had mean hydrodynamic diameters ,250 nm, zeta potential values in the range of -45 mV to -57 mV, and showed no signs of ravuconazole precipitation. Asymmetric flow field-flow fractionation with dynamic and multiangle laser light scattering was used to characterize these formulations in terms of size distribution and homogeneity. The fractograms obtained at 37?C showed a polydisperse profile for all blank and ravuconazole?SEDDS formulations but no large aggregates. SEDDS increased ravuconazole in vitro dissolution extent and rate (20%) compared to free drug (3%) in 6 h. The in vivo toxicity of blank SEDDS comprising Labrasol? surfactant in different concentrations and preliminary safety tests in repeated-dose oral administration (20 days) showed a dose-dependent Labrasol toxicity in healthy mice. Ravuconazole?SEDDS at low surfactant content (10%, v/v) in Trypanosoma cruzi-infected mice was safe during the 20-day treatment. The anti-T. cruzi activity of free ravuconazole, ravuconazole?SEDDS and each excipient were evaluated in vitro at equivalent ravuconazole concentrations needed to inhibit 50% or 90% (IC50 and IC90), respectively of the intracellular amastigote form of the parasite in a cardiomyocyte cell line. The results showed a clear improvement of the ravuconazole anti-T. cruzi activity when associated with SEDDS. Based on our results, the repurposing of ravuconazole in SEDDS dosage form is a strategy that deserves further in vivo investigation in preclinical studies for the treatment of human T. cruzi infections

Lithographically Defined Cross-Linkable Top Coats for Nanomanufacturing with High-χ Block Copolymers

The directed self-assembly (DSA) of block copolymers (BCPs) is a powerful method for the manufacture of high-resolution features. Critical issues remain to be addressed for successful implementation of DSA, such as dewetting and controlled orientation of BCP domains through physicochemical manipulations at the BCP interfaces, and the spatial positioning and registration of the BCP features. Here, we introduce novel top-coat (TC) materials designed to undergo cross-linking reactions triggered by thermal or photoactivation processes. The cross-linked TC layer with adjusted composition induces a mechanical confinement of the BCP layer, suppressing its dewetting while promoting perpendicular orientation of BCP domains. The selection of areas of interest with perpendicular features is performed directly on the patternable TC layer via a lithography step and leverages attractive integration pathways for the generation of locally controlled BCP patterns and nanostructured BCP multilayers

Dry-Etching Processes for High-Aspect-Ratio Features with Sub-10 nm Resolution High-χ Block Copolymers

International audienceDirected self-assembly of block copolymers (BCP) is a very attractive technique for the realization of functional nanostructures at high resolution. In this work, we developed full dry-etching strategies for BCP nanolithography using an 18 nm pitch lamellar silicon-containing block copolymer. Both an oxidizing Ar/O2 plasma and a nonoxidizing H2/N2 plasma are used to remove the topcoat material of our BCP stack and reveal the perpendicular lamellae. Under Ar/O2 plasma, an interfacial layer stops the etch process at the topcoat/BCP interface, which provides an etch-stop but also requires an additional CF4-based breakthrough plasma for further etching. This interfacial layer is not present in H2/N2. Increasing the H2/N2 ratio leads to more profound modifications of the silicon-containing lamellae, for which a chemistry in He/N2/O2 rather than Ar/O2 plasma produces a smoother and more regular lithographic mask. Finally, these features are successfully transferred into silicon, silicon-on-insulator, and silicon nitride substrates. This work highlights the performance of a silicon-containing block copolymer at 18 nm pitch to pattern relevant hard-mask materials for various applications, including microelectronics

Increased body exposure to new anti-trypanosomal through nanoencapsulation.

Lychnopholide, a lipophilic sesquiterpene lactone, is efficacious in mice at the acute and chronic phases of Chagas disease. Conventional poly-?-caprolactone (PCL) and long-circulating poly(D,L-lactide)-block-polyethylene glycol (PLA-PEG) nanocapsules containing lychnopholide were developed and characterized. Lychnopholide presented high association efficiency (>90%) with the nanocapsules. A new, fast and simple HPLC-UV-based bioanalytical method was developed, validated in mouse plasma and applied to lychnopholide quantification in in vitro release kinetics and pharmacokinetics. The nanocapsules had mean hydrodynamic diameters in the range of 100?250?nm, negative zeta potentials (?30 mV to ?57 mV), with good physical stability under storage. Atomic force microscopy morphological analysis revealed spherical monodispersed particles and the absence of lychnopholide crystallization or aggregation. Association of lychnopholide to PLA-PEG nanocapsules resulted in a 16-fold increase in body exposure, a 26-fold increase in plasma half-life and a dramatic reduction of the lychnopholide plasma clearance (17-fold) in comparison with free lychnopholide. The improved pharmacokinetic profile of lychnopholide in long-circulating nanocapsules is in agreement with the previously reported improved efficacy observed in Trypanosoma cruzi-infected mice. The present lychnopholide intravenous dosage form showed great potential for further pre-clinical and clinical studies in Chagas disease and cancer therapies

Self-organization and dewetting kinetics in sub-10 nm diblock copolymer line/space lithography

International audienceIn this work, we investigated the self-assembly of a lamellar block copolymer (BCP) under different wetting conditions. We explored the influence of the chemical composition of under-layers and top-coats on the thin film stability, self-assembly kinetics and BCP domain orientation. Three different chemistries were chosen for these surface affinity modifiers and their composition was tuned in order to provide either neutral wetting (i.e. an out-of-plane lamellar structure), or affine wetting conditions (i.e. an in-plane lamellar structure) with respect to a sub-10 nm PS- b -PDMSB lamellar system. Using such controlled wetting configurations, the competition between the dewetting of the BCP layer and the self-organization kinetics was explored. We also evaluated the spreading parameter of the BCP films with respect to the configurations of surface-energy modifiers and demonstrated that BCP layers are intrinsically unstable to dewetting in a neutral configuration. Finally, the dewetting mechanisms were evaluated with respect to the different wetting configurations and we clearly observed that the rigidity of the top-coat is a key factor to delay BCP film instability

An Ultra-Thin Near-Perfect Absorber via Block Copolymer Engineered Metasurfaces

International audienceProducing ultrathin light absorber layers is attractive towards the integration of lightweight planar components in electronic, photonic, and sensor devices. In this work, we report the experimental demonstration of a thin gold (Au) metallic metasurface with near-perfect visible absorption (~ 95 %). Au nanoresonators possessing heights from 5-15 nm with sub-50 nm diameters were engineered by block copolymer (BCP) templating. The Au nanoresonators were fabricated on an alumina (Al2O3) spacer layer and a reflecting Au mirror, in a film-coupled nanoparticle design. The BCP nanopatterning strategy to produce desired heights of Au nanoresonators was tailored to achieve nearperfect absorption at ≈ 600 nm. The experimental insight described in this work is a step forward towards realizing large area flat optics applications derived from subwavelengththin metasurfaces

Mechanisms of interaction of biodegradable polyester nanocapsules with non-phagocytic cells.

The interaction of polymer nanocapsules (NC) prepared from four biodegradable polyesters with variable polymer hydrophobicity (PCL, PLA, PLGA and PLA-PEG) was investigated in the non-phagocytic Vero, Caco-2 and HepG2 cell lines. The NC, labeled with the highly lipophilic fluorescent indocarbocyanine dye DIL, had very similar sizes (approx. 140?nm) and negative zeta-potentials. Asymmetric flow field-flow fractionation evidenced NC colloidal stability and negligible transfer of the dye to serum proteins in the incubation medium. The cytotoxicity of the NC was evaluated via MTT assay over a large polymer concentration range (1?1000??g/mL) and time of exposure (2, 24 and 48?h). The NC were safe in vitro up to a concentration of approx. 100??g/mL or higher, depending on the cell line and nature of the polymer. Vero cells were more sensitive to the NC, in particular NC of the more hydrophobic polymer. The cells were exposed to endocytosis inhibitors, incubated with NC, and the cell-associated fluorescence was quantified by spectrofluorometry. HepG2 cells presented a 1.5?2-fold higher endocytic capacity than Caco-2 and Vero cells. The main mechanism of NC uptake was caveolin-mediated endocytosis in HepG2 and Vero cells, and macropinocytosis in Caco-2 cells. Polymer hydrophobicity had an effect on the level of NC associated to HepG2 cells and to a lesser extent on the endocytosis mechanisms in Vero and Caco-2 cells. The NC uptake levels and endocytosis mechanisms differed significantly between cell lines tested

Host-Parasite Interactions in Chagas Disease: Genetically Unidentical Isolates of a Single <i>Trypanosoma cruzi</i> Strain Identified <i>In Vitro via</i> LSSP-PCR

<div><p>The present study aims at establishing whether the diversity in pathogenesis within a genetically diverse host population infected with a single polyclonal strain of <i>Trypanosoma cruzi</i> is due to selection of specific subpopulations within the strain. For this purpose we infected Swiss mice, a genetically diverse population, with the polyclonal strain of <i>Trypanosoma cruzi</i> Berenice-78 and characterized <i>via</i> LSSP-PCR the kinetoplast DNA of subpopulations isolated from blood samples collected from the animals at various times after inoculation (3, 6 and 12 months after inoculation). We examined the biological behavior of the isolates in acellular medium and <i>in vitro</i> profiles of infectivity in Vero cell medium. We compared the characteristics of the isolates with the inoculating strain and with another strain, Berenice 62, isolated from the same patient 16 years earlier. We found that one of the isolates had intermediate behavior in comparison with Berenice-78 and Berenice-62 and a significantly different genetic profile by LSSP-PCR in comparison with the inoculating strain. We hereby demonstrate that genetically distinct <i>Trypanosoma cruzi</i> isolates may be obtained upon experimental murine infection with a single polyclonal <i>Trypanosoma cruzi</i> strain.</p></div