Synchronization of organ pipes: experimental observations and modeling

We report measurements on the synchronization properties of organ pipes. First, we investigate influence of an external acoustical signal from a loudspeaker on the sound of an organ pipe. Second, the mutual influence of two pipes with different pitch is analyzed. In analogy to the externally driven, or mutually coupled self-sustained oscillators, one observes a frequency locking, which can be explained by synchronization theory. Further, we measure the dependence of the frequency of the signals emitted by two mutually detuned pipes with varying distance between the pipes. The spectrum shows a broad ``hump'' structure, not found for coupled oscillators. This indicates a complex coupling of the two organ pipes leading to nonlinear beat phenomena.Comment: 24 pages, 10 Figures, fully revised, 4 big figures separate in jpeg format. accepted for Journal of the Acoustical Society of Americ

Numerical generation of multidimensional flamelet databases using an adaptive wavelet method

The Wavelet Adaptive Multiresolution Representation (WAMR) code is used for the numerical time integration of the one-dimensional laminar diffusion flames equations in trans-critical and supercritical conditions, where the thermodynamic and transport properties exhibit large changes. These steep gradients are efficiently captured by the WAMR algorithm with an a-priori defined accuracy and an associated large reduction of the number of degrees of freedom, allowing a highly efficient flamelet database generation critical conditions

Combustion waves in a model with chain branching reaction and their stability

In this paper the travelling wave solutions in the adiabatic model with two-step chain branching reaction mechanism are investigated both numerically and analytically in the limit of equal diffusivity of reactant, radicals and heat. The properties of these solutions and their stability are investigated in detail. The behaviour of combustion waves are demonstrated to have similarities with the properties of nonadiabatic one-step combustion waves in that there is a residual amount of fuel left behind the travelling waves and the solutions can exhibit extinction. The difference between the nonadiabatic one-step and adiabatic two-step models is found in the behaviour of the combustion waves near the extinction condition. It is shown that the flame velocity drops down to zero and a standing combustion wave is formed as the extinction condition is reached. Prospects of further work are also discussed.Comment: pages 32, figures 2

Unconventional carrier-mediated ferromagnetism above room temperature in ion-implanted (Ga, Mn)P:C

Ion implantation of Mn ions into hole-doped GaP has been used to induce ferromagnetic behavior above room temperature for optimized Mn concentrations near 3 at.%. The magnetism is suppressed when the Mn dose is increased or decreased away from the 3 at.% value, or when n-type GaP substrates are used. At low temperatures the saturated moment is on the order of one Bohr magneton, and the spin wave stiffness inferred from the Bloch-law T^3/2 dependence of the magnetization provides an estimate Tc = 385K of the Curie temperature that exceeds the experimental value, Tc = 270K. The presence of ferromagnetic clusters and hysteresis to temperatures of at least 330K is attributed to disorder and proximity to a metal-insulating transition.Comment: 4 pages, 4 figures (RevTex4

The significance of beam steering on laser-induced incandescence measurements in laminar counterflow flames

Published online: 17 October 2018Beam steering is often encountered in laser diagnostic measurements, especially in flame environments, due to changes in refractive index caused by thermal and species gradients. It can negatively affect the accuracy of the results. In this work, the effects of beam steering on laser-induced incandescence (LII) measurements of pre-vaporized-liquid counterflow flames are assessed. The focus on counterflow flames is to facilitate future detailed experimental campaigns on one-dimensional nonpremixed sooty flames. It is found that the temperature and species gradients in the counterflow configuration have a much more significant impact on the beam profile than in laminar flat flames, especially for heavier fuels. As a result of the changes in the beam profile, for the same applied laser energy, the local fluence shifts markedly with fuel type, therefore, having a direct impact on the LII measurements. A procedure is developed for ensuring accurate measurements and it is shown that, for a specific fuel, it is possible to tailor the laser energy, such that the collected LII signal in the counterflow flames is nearly independent of beam-steering effects.S. Kruse, P. R. Medwell, J. Beeckmann, H. Pitsc

Variabilidad de rindes de trigo y fertilización nitrogenada

p.115-122En la primera parte del trabajo se presenta un modelo teórico de respuesta del cultivo de trigo a una serie de factores de producción. El objetivo del mismo es permitir la estimación del valor esperado de rinde, E (Y), y la varianza de rinde, V (Y), para cualquier nivel de uso de insumo. En la segunda parte se usa el modelo anterior para analizar el proceso de respuesta del cultivo de trigo al uso de fertilizante nitrogenado. Se utilizan datos experimentales correspondientes a la zona triguera II. Una función polinomial es ajustada a datos de ensayos llevados a cabo en la zona II Norte y en la zona II Sur. Una prueba estadística para detectar la presencia de heterocedasticidad (el Test de Park) permite estimar la influencia del nivel de fertilización nitrogenada sobre la variabilidad de rindes. Se concluye que (1) las dosis óptimas son considerablemente (30-50 por ciento) mayores en la zona II surque en la II Norte, (2) las diferencias (entre zonas) de dosis óptima son mayores cuanto menores son las relaciones de precio fertilizante-trigo y (3) la utilización de fertilizante nitrogenado no parece aumentad el riesgo económico de producción

Crystallographic structure of ultrathin Fe films on Cu(100)

We report bcc-like crystal structures in 2-4 ML Fe films grown on fcc Cu(100) using scanning tunneling microscopy. The local bcc structure provides a straightforward explanation for their frequently reported outstanding magnetic properties, i.e., ferromagnetic ordering in all layers with a Curie temperature above 300 K. The non-pseudomorphic structure, which becomes pseudomorphic above 4 ML film thickness is unexpected in terms of conventional rules of thin film growth and stresses the importance of finite thickness effects in ferromagnetic ultrathin films.Comment: 4 pages, 3 figures, RevTeX/LaTeX2.0

Using LES to Study Reacting Flows and Instabilities in Annular Combustion Chambers

Great prominence is put on the design of aeronautical gas turbines due to increasingly stringent regulations and the need to tackle rising fuel prices. This drive towards innovation has resulted sometimes in new concepts being prone to combustion instabilities. In the particular field of annular combustion chambers, these instabilities often take the form of azimuthal modes. To predict these modes, one must compute the full combustion chamber, which remained out of reach until very recently and the development of massively parallel computers. Since one of the most limiting factors in performing Large Eddy Simulation (LES) of real combustors is estimating the adequate grid, the effects of mesh resolution are investigated by computing full annular LES of a realistic helicopter combustion chamber on three grids, respectively made of 38, 93 and 336 million elements. Results are compared in terms of mean and fluctuating fields. LES captures self-established azimuthal modes. The presence and structure of the modes is discussed. This study therefore highlights the potential of LES for studying combustion instabilities in annular gas turbine combustors

On the interaction of vortices with mixing layers

We describe the perturbations introduced by two counter-rotating vortices - in a two-dimensional configuration - or by a vortex ring - in an axisymmetric configuration - to the mixing layer between two counterflowing gaseous fuel and air streams of the same density. The analysis is confined to the near stagnation point region, where the strain rate of the unperturbed velocity field, A0, is uniform. We restrict our attention to cases where the typical distance 2r0 between the vortices - or the characteristic vortex ring radius r0 - is large compared to both the thickness, δv, of the vorticity core and the thickness, δm∼(ν/A0)1/2, of the mixing layer. In addition, we consider that the ratio, Γ/ν, of the vortex circulation, Γ, to the kinematic viscosity, ν, is large compared to unity. Then, during the interaction time, A0,-1, the viscous and diffusion effects are confined to the thin vorticity core and the thin mixing layer, which, when seen with the scale r0, appears as a passive interface between the two counterflowing streams when they have the same density. In this case, the analysis provides a simple procedure to describe the displacement and distortion of the interface, as well as the time evolution of the strain rate imposed on the mixing layer, which are needed to calculate the inner structure of the reacting mixing layer as well as the conditions for diffusion flame extinction and edge-flame propagation along the mixing layer. Although in the reacting case variable density effects due to heat release play an important role inside the mixing layer, in this paper the analysis of the inner structure is carried out using the constant density model, which provides good qualitative understanding of the mixing layer response