430 research outputs found

    Advanced Luminescence Imaging of CIGS Solar Cells

    Get PDF
    The importance of CIGS based solar cells for terrestrial application increases steadily. A key issue for a high production yield are efficient inspection tools at the early stage of the production process. The present contribution focuses on imaging characterization of CIGS solar cells including photo and electroluminescence. PL imaging does not need electrical contacts and can be applied after the absorber deposition prior to the TCO deposition and the completion of the module. The effect of heat treatment on thermally evaporated In2S3 buffer layer with respect to the device performance is studied on the absorber amp;buffer stack by PL imaging. The correlation between PL intensity with achieved open circuit voltages of the completed devices has been established. It will be concluded that the quality of the buffer layer and the interface is well detectable at this early stage by PL imaging. The other issue addressed in this contribution is a characterization of graded gap absorbers by EL imaging. It will be demonstrated that luminescence imaging using optical bandpass filters can be used for the evaluation of the bandgap grading of CIGS absorbers fabricated by sequential processes. Furthermore, lateral inhomogeneities with respect to the In Ga intermixing can be detected already after the absorber deposition by the proposed PL imaging metho

    Time resolved investigation of Cu In,Ga Se2 growth and Ga gradient formation during fast selenization of metallic precursors

    Get PDF
    Ga segregation at the backside of Cu In,Ga Se2 solar cell absorbers is a commonly observed phenomenon for a large variety of sequential fabrication processes. Here, we investigate the correlation between Se incorporation, phase formation and Ga segregation during fast selenisation of Cu In Ga precursor films in elemental selenium vapour. Se incorporation and phase formation are analysed by real time synchrotron based X ray diffraction and fluorescence analysis. Correlations between phase formation and depth distributions are gained by interrupting the process at several points and by subsequent ex situ cross sectional electron microscopy and Raman spectroscopy. The presented results reveal that the main share of Se incorporation takes place within a few seconds during formation of In Se at the top part of the film, accompanied by outdiffusion of In out of a ternary Cu In Ga phase. Surprisingly, CuInSe2 starts to form at the surface on top of the In Se layer, leading to an intermediate double graded Cu depth distribution. The remaining Ga rich metal phase at the back is finally selenised by indiffusion of Se. On the basis of a proposed growth model, we discuss possible strategies and limitations for the avoidance of Ga segregation during fast selenisation of metallic precursors. Solar cells made from samples selenised with a total annealing time of 6.5 amp; 8201;min reached conversion efficiencies of up to 14.2 total area, without anti reflective coating . The evolution of the Cu In,Ga Se2 diffraction signals reveals that the minimum process time for high quality Cu In,Ga Se2 absorbers is limited by cation ordering rather than Se incorporatio

    A new approach for alkali incorporation in Cu2ZnSnS4 solar cells

    Get PDF
    The addition of alkali elements has become mandatory for boosting solar cell performance in chalcogenide thin films based on kesterites (Cu2ZnSnS4, CZTS). A novel doping process is presented here, that consists in the incorporation of sodium or lithium during the deposition of the CdS buffer layer, followed by a post-deposition annealing (PDA). As the doping route leads to more efficient devices in comparison with the undoped reference sample, the influence of PDA temperature was also investigated. Compositional profiling techniques, time-of-flight secondary ion mass spectrometry (TOF-SIMS) and glow discharge optical mission spectroscopy (GDOES), revealed a dependence of the alkaline distribution in kesterites with the PDA temperature. Although the doping process is effective in that it increases the alkaline concentration compared to the undoped sample, the compositional profiles indicate that a significant proportion of Li and Na remains ‘trapped’ within the CdS layer. In the 200 °C-300 °C range the alkali profiles registered the higher concentration inside the kesterite. Despite this, an additional alkali accumulation close to the molybdenum/fluorine doped tin oxide substrate was found for all the samples, which is frequently related to alkali segregation at interfaces. The addition of both, lithium and sodium, improves the photovoltaic response compared to the undoped reference device. This is mainly explained by a substantial improvement in the open-circuit potential (V oc) of the cells, with best devices achieving efficiencies of 4.5% and 3% for lithium and sodium, respectively. Scanning-electron microscopy images depicted a ‘bilayer structure’ with larger grains at the top and small grains at the bottom in all samples. Moreover, the calculated bandgap energies of the CZTS films account for changes in the crystallographic order-disorder of the kesterites, more related to the PDA treatment rather than alkali incorporation. Even if further optimization of the absorber synthesis and doping process will be required, this investigation allowed the evaluation of a novel strategy for alkali incorporation in kesterite based solar cells.Fil: Valdes, Matias Hernan. Consejo Nacional de Investigaciones CientĂ­ficas y TĂ©cnicas. Centro CientĂ­fico TecnolĂłgico Conicet - Mar del Plata. Instituto de Investigaciones en Ciencia y TecnologĂ­a de Materiales. Universidad Nacional de Mar del Plata. Facultad de IngenierĂ­a. Instituto de Investigaciones en Ciencia y TecnologĂ­a de Materiales; ArgentinaFil: Hernandez, A.. Catalonia Institute For Energy Research Irec; EspañaFil: SĂĄnchez, Y.. Catalonia Institute For Energy Research Irec; EspañaFil: Fonoll, R.. Catalonia Institute For Energy Research Irec; EspañaFil: Placidi, M.. Universidad PolitĂ©cnica de Catalunya; España. Catalonia Institute For Energy Research Irec; EspañaFil: Izquierdo, V.. Catalonia Institute For Energy Research Irec; EspañaFil: Cabas Vidani, A.. Swiss Federal Laboratories for Materials Science and Technology; SuizaFil: Valentini, M.. Enea Centro Ricerche Casaccia; ItaliaFil: Mittiga, A.. Enea Centro Ricerche Casaccia; ItaliaFil: Pistor, P.. Universidad Pablo de Olavide; EspañaFil: Malerba, C.. Enea Centro Ricerche Casaccia; ItaliaFil: Saucedo, E.. Universidad PolitĂ©cnica de Catalunya; Españ

    AMBRA1 is able to induce mitophagy via LC3 binding, regardless of PARKIN and p62/SQSTM1

    Get PDF
    Damaged mitochondria are eliminated by mitophagy, a selective form of autophagy whose dysfunction associates with neurodegenerative diseases. PINK1, PARKIN and p62/SQTMS1 have been shown to regulate mitophagy, leaving hitherto ill-defined the contribution by key players in 'general' autophagy. In basal conditions, a pool of AMBRA1 - an upstream autophagy regulator and a PARKIN interactor - is present at the mitochondria, where its pro-autophagic activity is inhibited by Bcl-2. Here we show that, upon mitophagy induction, AMBRA1 binds the autophagosome adapter LC3 through a LIR (LC3 interacting region) motif, this interaction being crucial for regulating both canonical PARKIN-dependent and -independent mitochondrial clearance. Moreover, forcing AMBRA1 localization to the outer mitochondrial membrane unleashes a massive PARKIN- and p62-independent but LC3-dependent mitophagy. These results highlight a novel role for AMBRA1 as a powerful mitophagy regulator, through both canonical or noncanonical pathways

    Legal determinants of external finance revisited : the inverse relationship between investor protection and societal well-being

    Get PDF
    This paper investigates relationships between corporate governance traditions and quality of life as measured by a number of widely reported indicators. It provides an empirical analysis of indicators of societal health in developed economies using a classification based on legal traditions. Arguably the most widely cited work in the corporate governance literature has been the collection of papers by La Porta et al. which has shown, inter alia, statistically significant relationships between legal traditions and various proxies for investor protection. We show statistically significant relationships between legal traditions and various proxies for societal health. Our comparative evidence suggests that the interests of investors may not be congruent with the interests of wider society, and that the criteria for judging the effectiveness of approaches to corporate governance should not be restricted to financial metrics
    • 

    corecore