Interaction of Delaminations and Matrix Cracks in a CFRP Plate, Part II: Simulation Using an Enriched Shell Finite Element Model

Numerical simulations are presented of a recently developed test which creates multiple delaminations in a CFRP laminate specimen that grow and interact via transverse matrix cracks. A novel shell element enriched with the Floating Node Method, and a damage algorithm based on the Virtual Crack Closure Technique, were used to successfully simulate the tests. Additionally, a 3D high mesh fidelity model based on cohesive zones and continuum damage mechanics was used to simulate the tests and act as a representative of other similar state-of-the-art high mesh fidelity modeling techniques to compare to the enriched shell element. The enriched shell and high mesh fidelity models had similar levels of accuracy and generally matched the experimental data. With runtimes of 36 minutes for the shell model and 55 hours for the high mesh fidelity model, the shell model is 92 times faster than the high- fidelity simulation

Risk of Type 2 Diabetes and Obesity Is Differentially Associated with Variation in FTO in Whites and African-Americans in the ARIC Study

Single nucleotide polymorphisms (SNPs) in the fat mass and obesity associated (FTO) gene are associated with body mass index (BMI) in populations of European descent. The FTO rs9939609 variant, first detected in a genome-wide association study of diabetes, conferred an increased disease risk that was abolished after adjustment for BMI, suggesting that the association may be due to variation in adiposity. The relationship between diabetes, four previously identified FTO polymorphisms that span a 19.6-kb genomic region, and obesity was therefore evaluated in the biracial population-based Atherosclerosis Risk in Communities Study with the goal of further refining the association by comparing results between the two ethnic groups. The prevalence of diabetes and obesity (BMI ≥30 kg/m2) was established at baseline, and diabetes was determined by either self-report, a fasting glucose level ≥126 mg/dL, or non-fasting glucose ≥200 mg/dL. There were 1,004 diabetes cases and 10,038 non-cases in whites, and 670 cases and 2,780 non-cases in African-Americans. Differences in mean BMI were assessed by a general linear model, and multivariable logistic regression was used to predict the risk of diabetes and obesity. For white participants, the FTO rs9939609 A allele was associated with an increased risk of diabetes (odds ratio (OR)  = 1.19, p<0.001) and obesity (OR = 1.22, p<0.001) under an additive genetic model that was similar for all of the SNPs analyzed. In African-Americans, only the rs1421085 C allele was a determinant of obesity risk (OR = 1.17, p = 0.05), but was found to be protective against diabetes (OR = 0.79, p = 0.03). Adjustment for BMI did not eliminate any of the observed associations with diabetes. Significant statistical interaction between race and the FTO variants suggests that the effect on diabetes susceptibility may be context dependent

Plasma Surface Modification of Polymer Backsheets: Origins of Future Interfacial Barrier/Backsheet Failure

Flexible polymer substrates coated with inorganic oxide moisture barriers are a potential replacement for glass backsheets in thin film PV modules. Silicon oxynitride (SiOxNy) deposited by PECVD on polyethylene terephthalate (PET) represents one potential new backsheet candidate. Barrier deposition runs at NREL have typically included a nitrogen-rich plasma pretreatment prior to actual barrier deposition with the intention of cleaning the PET surface as well as enhancing adhesion of the SiOxNy barrier film to PET; however, test coupons of PET/barrier/EVA/TPE failed after damp heat exposure. PET substrates exposed to plasma conditions similar to those used in pre-treatment were examined by X-ray photoelectron spectroscopy (XPS) to reveal new low molecular weight PET fragments are created which are volatile upon heating and water soluble. Failure analysis of the coupons determined that the moisture barrier is, in fact, transferred to the encapsulant side

Effectiviteit bodembeschermende voorzieningen voor spoelbassins in de bloembollensector; veldonderzoek

Drie principes van bodembeschermende voorzieningen voor spoelbassins zijn in de praktijk onderzocht: remming van infiltratiesnelheid (met klei en folie afdichtingen), hydrologische isolatie (interceptor drains met en zonder afdichtingslaag) en adsorptie. Op zand-, zavel en lössgronden is afdichten met klei of leem nodig wanneer de bodem boven de grondwaterspiegel ligt om recirculatie mogelijk te maken, maar deze maatregel is onvoldoende voor de bescherming van de bodem en zijn aanvullende voorzieningen nodig (bijvoorbeeld hydrologische isolatie). In kwelgebieden en in situaties met een verlaagde bodem is deze variant wel effectief. De effectiviteit van hydrologische isolatie en adsorptielagen lopen uiteen van 90 tot 95%. De investeringen voor bodembeschermende voorzieningen bedragen f 3,00 tot f 13,00 per m3 en de jaarlijkse kosten f 1,70 tot f 2,20 per m3 bassin inhoud. Monitoring dient zich te richten op verspreiding bij hydrologische isolatie en infiltratieremming, aangevuld met monitoring van de kwaliteit van het grondwater. Monitoring van adsorptielagen dient zich te richten op de kwaliteit van de adsorptielaag en de bodem daaronder

Identification and quantification of gaseous organic compounds emitted from biomass burning using two-dimensional gas chromatography/time-of-flight mass spectrometry

The current understanding of secondary organic aerosol (SOA) formation within biomass burning (BB) plumes is limited by the incomplete identification and quantification of the non-methane organic compounds (NMOCs) emitted from such fires. Gaseous organic compounds were collected on sorbent cartridges during laboratory burns as part of the fourth Fire Lab at Missoula Experiment (FLAME-4), with analysis by two-dimensional gas chromatography/time-of-flight mass spectrometry (GC×GC/TOFMS). The sensitivity and resolving power of GC×GC/TOFMS allowed the acquisition of the most extensive data set of BB NMOCs to date, with measure ments for 722 positively or tentatively identified compounds. Estimated emission factors (EFs) are presented for these compounds for burns of six different vegetative fuels, including conifer branches, grasses, agricultural residue, and peat. The number of compounds detected from individual burns ranged from 129 to 474, and included extensive isomer groups. For example, 38 monoterpene isomers were observed in the emissions from coniferous fuels; the isomeric ratios were found to be consistent with those reported in relevant essential oils, suggesting that the composition of such oils may be very useful when predicting fuel-dependent terpene emissions. Further, eleven sesquiterpenes were detected and tentatively identified, providing the first reported speciation of sesquiterpenes in gas-phase BB emissions. The calculated EFs for all measured compounds are compared and discussed in the context of potential SOA formation

Identification and quantification of gaseous organic compounds emitted from biomass burning using two-dimensional gas chromatography–time-of-flight mass spectrometry

The current understanding of secondary organic aerosol (SOA) formation within biomass burning (BB) plumes is limited by the incomplete identification and quantification of the non-methane organic compounds (NMOCs) emitted from such fires. Gaseous organic compounds were collected on sorbent cartridges during laboratory burns as part of the fourth Fire Lab at Missoula Experiment (FLAME-4) and analyzed by two-dimensional gas chromatography-time-of-flight mass spectrometry (GC x GC-ToFMS). The sensitivity and resolving power of GC x GC-ToFMS allowed the acquisition of the most extensive data set of BB NMOCs to date, with measurements from 708 positively or tentatively identified compounds. Estimated emission factors (EFs) are presented for these compounds for burns of six different vegetative fuels, including conifer branches, grasses, agricultural residue, and peat. The number of compounds meeting the peak selection criteria ranged from 129 to 474 among individual burns, and included extensive isomer groups. For example, 38 monoterpene isomers were observed in the emissions from coniferous fuels; the isomeric ratios were found to be consistent with those reported in relevant essential oils, suggested that the composition of such oils may be very useful when predicting fuel-dependent terpene emissions. Further, 11 sesquiterpenes were deteched and tentatively identified, providing the first reported speciation of sesquiterpenes in gas-phase BB emissions. The calculated EFs for all measured compounds are compared and discussed in the context of potential SOA formation

Early Advanced LIGO binary neutron-star sky localization and parameter estimation

2015 will see the first observations of Advanced LIGO and the start of the gravitational-wave (GW) advanced-detector era. One of the most promising sources for ground-based GW detectors are binary neutron-star (BNS) coalescences. In order to use any detections for astrophysics, we must understand the capabilities of our parameter-estimation analysis. By simulating the GWs from an astrophysically motivated population of BNSs, we examine the accuracy of parameter inferences in the early advanced-detector era. We find that sky location, which is important for electromagnetic follow-up, can be determined rapidly (~5 s), but that sky areas may be hundreds of square degrees. The degeneracy between component mass and spin means there is significant uncertainty for measurements of the individual masses and spins; however, the chirp mass is well measured (typically better than 0.1%).Comment: 4 pages, 2 figures. Published in the proceedings of Amaldi 1

Experimental Investigation on the Deformation Response of Hybrid 3D Woven Composites

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/97059/1/AIAA2012-1572.pd

Polycrystalline Thin Film Device Degradation Studies

Oxygen during vapor CdCl2 (VCC) treatments significantly reduced resistive shunts observed in CdS/CdTe polycrystalline devices using thinner CdS layers during 100 deg C, open-circuit, 1-sun accelerated stress testing. Cu oxidation resulting from the reduction of various trace oxides present in as-grown and VCC treated films is the proposed mechanism by which Cu diffusion, and subsequent shunts are controlled. Graphite paste layers between metallization and CdTe behave like diffusion barriers and similarly benefit device stability. Ni-based contacts form a protective Ni2Te3 intermetallic layer that reduces metal diffusion but degrades performance through increased series resistance