1,091 research outputs found
Observation of an Excited Bc+ State
Using pp collision data corresponding to an integrated luminosity of 8.5 fb-1 recorded by the LHCb experiment at center-of-mass energies of s=7, 8, and 13 TeV, the observation of an excited Bc+ state in the Bc+π+π- invariant-mass spectrum is reported. The observed peak has a mass of 6841.2±0.6(stat)±0.1(syst)±0.8(Bc+) MeV/c2, where the last uncertainty is due to the limited knowledge of the Bc+ mass. It is consistent with expectations of the Bc∗(2S31)+ state reconstructed without the low-energy photon from the Bc∗(1S31)+→Bc+γ decay following Bc∗(2S31)+→Bc∗(1S31)+π+π-. A second state is seen with a global (local) statistical significance of 2.2σ (3.2σ) and a mass of 6872.1±1.3(stat)±0.1(syst)±0.8(Bc+) MeV/c2, and is consistent with the Bc(2S10)+ state. These mass measurements are the most precise to date
The LHCb VELO Upgrade module construction
The LHCb detector has undergone a major upgrade for LHC Run 3. This Upgrade I detector facilitates operation at higher luminosity and utilises full-detector information at the LHC collision rate, critically including the use of vertex information. A new vertex locator system, the VELO Upgrade, has been constructed. The core element of the new VELO are the double-sided pixelated hybrid silicon detector modules which operate in vacuum close to the LHC beam in a high radiation environment. The construction and quality assurance tests of these modules are described in this paper. The modules incorporate 200 μm thick, n-on-p silicon sensors bump-bonded to 130 nm technology ASICs. These are attached with high precision to a silicon microchannel substrate that uses evaporative CO2 cooling. The ASICs are controlled and read out with flexible printed circuits that are glued to the substrate and wire-bonded to the chips. The mechanical support of the module is given by a carbon fibre plate, two carbon fibre rods and an aluminium plate. The sensor attachment was achieved with an average precision of 21 μm, more than 99.5% of all pixels are fully functional, and a thermal figure of merit of 3 Kcm2W-1 was achieved. The production of the modules was successfully completed in 2021, with the final assembly and installation completed in time for data taking in 2022
A search for rare B → Dμ + μ − decays
A search for rare B → Dμ+μ− decays is performed using proton-proton collision data collected by the LHCb experiment, corresponding to an integrated luminosity of 9 fb−1. No significant signals are observed in the non-resonant μ+μ− modes, and upper limits of BB0→D¯0μ+μ−<5.1×10−8, BB+→Ds+μ+μ−<3.2×10−8, BBs0→D¯0μ+μ−<1.6×10−7 and fc/fu·BBc+→Ds+μ+μ−<9.6×10−8 are set at the 95 % confidence level, where fc and fu are the fragmentation fractions of a B meson with a c and u quark respectively in proton-proton collisions. Each result is either the first such measurement or an improvement by three orders of magnitude on an existing limit. Separate upper limits are calculated when the muon pair originates from a J/ψ → μ+μ− decay. The branching fraction of Bc+→Ds+J/ψ multiplied by the fragmentation-fraction ratio is measured to befcfu·BBc+→Ds+J/ψ=1.63±0.15±0.13×10−5, where the first uncertainty is statistical and the second systematic
Multiplicity dependence of σ ψ (2 S ) /σ J/ψ in pp collisions at s = 13 TeV
The ratio of production cross-sections of ψ(2S) over J/ψ mesons as a function of charged-particle multiplicity in proton-proton collisions at a centre-of-mass energy s = 13 TeV is measured with a data sample collected by the LHCb detector, corresponding to an integrated luminosity of 658 pb−1. The ratio is measured for both prompt and non-prompt ψ(2S) and J/ψ mesons. When there is an overlap between the rapidity ranges over which multiplicity and charmonia production are measured, a multiplicity-dependent modification of the ratio is observed for prompt mesons. No significant multiplicity dependence is found when the ranges do not overlap. For non-prompt production, the ψ(2S)-to-J/ψ production ratio is roughly independent of multiplicity, irrespective of the rapidity range over which the multiplicity is measured. The results are compared to predictions of the co-mover model and agree well except in the low multiplicity region. The ratio of production cross-sections of ψ(2S) over J/ψ mesons are cross-checked with other measurements in di-lepton channels and found to be compatible
The LHCb Upgrade I
The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software
Amplitude analysis of the Λ b 0 → pK − γ decay
The resonant structure of the radiative decay Λb0→pK−γ in the region of proton-kaon invariant-mass up to 2.5 GeV/c2 is studied using proton-proton collision data recorded at centre-of-mass energies of 7, 8, and 13 TeV collected with the LHCb detector, corresponding to a total integrated luminosity of 9 fb−1. Results are given in terms of fit and interference fractions between the different components contributing to this final state. Only Λ resonances decaying to pK− are found to be relevant, where the largest contributions stem from the Λ(1520), Λ(1600), Λ(1800), and Λ(1890) states
Measurement of the Z boson production cross-section in pp collisions at s = 5. 02 TeV
The first measurement of the Z boson production cross-section at centre-of-mass energy s = 5.02 TeV in the forward region is reported, using pp collision data collected by the LHCb experiment in year 2017, corresponding to an integrated luminosity of 100 ± 2 pb−1. The production cross-section is measured for final-state muons in the pseudorapidity range 2.0 20 GeV/c. The integrated cross-section is determined to beσZ→μ+μ−=39.6±0.7stat±0.6syst±0.8lumipb for the di-muon invariant mass in the range 60 < Mμμ< 120 GeV/c2. This result and the differential cross-section results are in good agreement with theoretical predictions at next-to-next-to-leading order in the strong coupling constant. Based on a previous LHCb measurement of the Z boson production cross-section in pPb collisions at sNN = 5.02 TeV, the nuclear modification factor RpPb is measured for the first time at this energy. The measured values are 1.2−0.3+0.5 (stat) ± 0.1(syst) in the forward region (1.5
Study of B c + → χ c π + decays
A study of Bc+→χcπ+ decays is reported using proton-proton collision data, collected with the LHCb detector at centre-of-mass energies of 7, 8, and 13 TeV, corresponding to an integrated luminosity of 9 fb−1. The decay Bc+→χc2π+ is observed for the first time, with a significance exceeding seven standard deviations. The relative branching fraction with respect to the Bc+→J/ψπ+ decay is measured to beBBc+→χc2π+BBc+→J/ψπ+=0.37±0.06±0.02±0.01, where the first uncertainty is statistical, the second is systematic, and the third is due to the knowledge of the χc2→ J/ψγ branching fraction. No significant Bc+→χc1π+ signal is observed and an upper limit for the relative branching fraction for the Bc+→χc1π+ and Bc+→χc2π+ decays of BBc+→χc1π+BBc+→χc2π+=<0.49 is set at the 90% confidence level
Measurement of the Λ c + to D 0 production ratio in peripheral PbPb collisions at s NN = 5. 02 TeV
We report on a measurement of the Λc+ to D0 production ratio in peripheral PbPb collisions at sNN = 5.02 TeV with the LHCb detector in the forward rapidity region 2 < y < 4.5. The Λc+ (D0) hadrons are reconstructed via the decay channel Λc+→ pK−π+ (D0→ K−π+) for 2 < pT< 8 GeV/c and in the centrality range of about 65–90%. The results show no significant dependence on pT, y or the mean number of participating nucleons. They are also consistent with similar measurements obtained by the LHCb collaboration in pPb and Pbp collisions at sNN = 5.02 TeV. The data agree well with predictions from PYTHIA in pp collisions at s = 5 TeV but are in tension with predictions of the Statistical Hadronization model
Observation of the B c + → J / ψ π + π 0 decay
The first observation of the Bc+→J/ψπ+π0 decay is reported with high significance using proton-proton collision data, corresponding to an integrated luminosity of 9 fb−1, collected with the LHCb detector at centre-of-mass energies of 7, 8, and 13 TeV. The ratio of its branching fraction relative to the Bc+→J/ψπ+ channel is measured to beBBc+→J/ψπ+π0BBc+→J/ψπ+=2.80±0.15±0.11±0.16, where the first uncertainty is statistical, the second systematic and the third related to imprecise knowledge of the branching fractions for B+ → J/ψK*+ and Bc+→J/ψπ+ decays, which are used to determine the π0 detection efficiency. The π+π0 mass spectrum is found to be consistent with the dominance of an intermediate ρ+ contribution in accordance with a model based on QCD factorisation
- …