32 research outputs found
The feasibility of using pulsed-vacuum in stimulating calcium-alginate hydrogel balls
Open Access JournalThe effect of the pulsed-vacuum stimulation (PVS) on the external gelation process of calcium-alginate (Ca-Alg) hydrogel balls was studied. The process was conducted at four different working pressures (8, 35, 61, and 101 kPa) for three pulsed-vacuum cycles (one cycle consisted of three repetitions of 10 min of depressurization and 10 min of vacuum liberation). The diffusion coefficients (D) of calcium cations (Ca2+) gradually reduced over time and were significantly pronounced (p 0.91). An application of a pulsed vacuum at 8 kPa led to the highest weight reduction and shrinkage of Ca-Alg hydrogel samples compared to other working pressures, while 61 kPa seemed to be the best condition. Although all textural characteristics (hardness, breaking deformation, Youngās modulus, and rupture strength) did not directly variate by the level of working pressures, they were likely correlated with the levels of WR and Sv. Scanning electron micrographs (SEM) supported that the working pressure affected the characteristics of Ca-Alg hydrogel structure. Samples stimulated at a working pressure of 8 kPa showed higher deformation with heterogenous structure, large cavities, and looser layer when compared with those at 61 kPa. These results indicate the PVS is a promising technology that can be effectively applied in the external gelation process of Ca-Alg gel
Aflatoxin and fumonisin mycotoxins contamination along the maize value chain in the eastern Democratic Republic of Congo
Aflatoxin and fumonisin contamination was assessed in different samples along the maize value chain in different territories of South Kivu province. Kabare and Ruzizi Plain were chosen as they represent two different agroecological areas where maize is mostly produced. Twelve districts and one town were selected across the province. The stakeholders were randomly selected, and 215 maize (139 maize grain and 76 maize flour) samples were taken for laboratory analysis. The Q + kit was used to determine the total aflatoxins and fumonisins. Three categories of maize were examined: freshly harvested dry maize, stored maize (maize stored for 3 months Ā±1.5 month) and market maize. Aflatoxin was found in 100% of the maize samples with the least content of 0.3 Ī¼g/kg detected in freshly harvested dry maize with mean 3.2+0.3 and levels ranging from 0.3 to 18.5 Ī¼g/kg. The average level of aflatoxin in stored grain samples was 97.9Ā±182 Ī¼g/kg within a range of 1.16 to 841.5 Ī¼g/kg, and the mean level of aflatoxin in stored flour was 148.9Ā±164.5 Ī¼g/kg with levels ranging from 2.05 to 905.1 Ī¼g/kg. The mean level of aflatoxin maize collected from the market was 95.1 Ā±164 Ī¼g/kg, with levels ranging from 1 to 823.2 Ī¼g/kg. Almost all the maize flour collected from the three areas had a high contamination level that exceeded the maximum tolerable limit of 10 Ī¼g/kg. Fumonisin was detected in all samples. However, the levels of fumonisin do not follow a specific trend with the duration of storage. The freshly harvested dry maize concentration was 2.4Ā±5.1 Ī¼g/g, with levels ranging from 0.03 to 20.9Ī¼g/g. About 37% of freshly harvested maize samples contaminated by fumonisin exceeded the maximum tolerable limit of 4 Ī¼g/kg. There was a difference between total fumonisin in grain and flour; the average level of fumonisin in stored maize grain was 1.4Ā±0.9 Ī¼g/g with levels ranging from 0.18- 4.7 Ī¼g/g while in flour, the level was 2.1Ā±1.3 Ī¼g/g with levels ranging from 0.3-4.5 Ī¼g/g. Almost all the maize samples collected from the three areas had a degree of contamination that did not exceed the maximum tolerable limit of 4 Ī¼g/g. These results indicate that the two mycotoxin levels, particularly aflatoxin, were high in the different samples collected at specific nodes. Therefore, preventing mycotoxins accumulation in maize by post-harvest prevention of contamination and growth of toxigenic moulds by promoting proper grain drying and storage should be encouraged among the actors of the maize value chain. 
How does cultivar, maturation, and pre-treatment affect nutritional, physicochemical, and pasting properties of plantain flours?
Open Access JournalThe effect of cultivar, ripening stage, and pre-treatment method were investigated on the nutritional, physicochemical, and pasting properties of plantain flours from two plantains and two plantain hybrids. There were significant variations (p < 0.05) in chemical composition and physical properties influenced by the interaction of cultivars, ripening stages, and pre-treatment methods. The highest levels of amylose, water-holding capacity (WHC), and oil-holding capacity (OHC) were observed in unripe flours and acid-treated flour recorded the highest content of resistant starch (RS). Flour after pre-blanching contained the highest level of total phenolic (TP), carotenoid contents, and browning index (BI) value. In contrast, acid-treated flours had the lowest BI value. As ripening progressed, peak viscosity and breakdown values increased but final viscosity, setback, and pasting temperature values were reduced. Untreated flour samples showed the highest peak viscosity. Higher breakdown values were found in acid-treated samples and higher setback values in pre-blanched samples
Influence of bunch maturation and chemical precursors on acrylamide formation in starchy banana chips
The present study investigated the effect of ripening stages and chemical precursors on acrylamide formation in deep-fried chips of five plantains and one cooking banana. The highest level of acrylamide was found in the cooking banana, followed by False Horn plantain and French plantain, respectively. French plantain hybrids exhibited a significantly lower (P 0.60) with acrylamide formation in fried chips. The higher level of TP was significantly related (P < 0.05) to the lower level of acrylamide (r = ā0.62). The reduced levels of carotenoid isomers, except lutein, during fruit ripening were positively correlated (P < 0.05) with acrylamide formation, especially trans-BC (r = 0.72) and 9-cis-BC(r = 0.64)
Consumer preferences and socioeconomic factors decided on plantain and plantain-based products in the central region of Cameroon and Oyo state, Nigeria
Open Access Journal; Published online: 22 Aug 2021Plantain is a key staple food in Central and West Africa, but there is limited understanding of its market in Africa. In addition, the cooking methods for enhancing the nutritional value, consumer preference, and willingness to pay for plantain and plantain-based products are not well understood. The knowledge gaps in the market and consumer dimension of the food chain need to be known to increase plantain utilization and guide breeding efforts. This research contributes by examining the cooking methods, consumer preference, and willingness to pay for plantain and plantain-based products in Cameroon and Nigeria. A household survey sample of 454 Cameroonian consumers in four divisions of Central Region and 418 Nigerian consumers in seven government areas of Oyo State in southwest Nigeria was the basis for the analysis. The results showed some levels of similarity and difference in the consumption and cooking of boiled, roasted, and fried plantain in both countries. The trend in consumption of all plantain-based products was constant in Cameroon but increased in Nigeria. The most important factor influencing Cameroonian consumersā choice of plantain and its products was taste, while the nutrition trait influenced Nigerian consumers. Both Cameroonian and Nigerian consumers considered packaging, location of produce, and size and quantity as the least important factors. In addition, socioeconomic characteristics were significant determinants of consumersā choices to consume plantain and its products. Gender significantly influenced (p < 0.05) taste, while nutrition was significantly driven (p < 0.05) by education and annual income. Household size played a significant role (p < 0.05) in consumersā choices when the price was considered. These findings serve as a guideline to improve existing products to match the needs of consumers in each country and develop products for different consumer segments and potentially increase production
Impact of novel farāinfrared frying technique on quality aspects of chicken nuggets and frying medium
Online firstThe impact of farāinfrared and conventional heaters on heat distribution and physicochemical qualities of chicken nuggets and frying medium were investigated. For chicken nuggets, moisture content, fat content, color (L*, a*, and b*), and texture characteristics were determined, while free fatty acid (FFA), peroxide value (PV), total polar materials (TPMs), and color were used to measure the quality of frying oil. A higher heating rate and more uniform heat distribution were observed in the farāinfrared frying. Physicochemical qualities of chicken nugget were not significantly influenced by type of heater, except the fat content in the crust was significantly higher (p < 0.05) in farāinfrared fried samples. The FFA, TPM, and color values of frying oil were better in farāinfrared frying. Farāinfrared frying can be used for about 56 and 115 more cycles than conventional frying when using FFA of 0.8% and TPM of 25%, respectively as an indicator to discard the oil
Rapid determination of fructooligosaccharide in solarādried banana syrup by using nearāinfrared spectroscopy
Published online: 20 April 2021The transformation of value-added solar-dried banana to banana syrup, which contains very high levels of fructooligosaccharides (FOS), is attractive. It has promising economic potential for the nutraceutical and functional food industry. In this study, the near-infrared (NIR) spectroscopy was used for the detection of 1-kestose (GF2), nystose (GF3), 1F-fructofuranosylnystose (GF4), and total FOS in solar-dried banana syrup in the spectral region of 4000ā12,000 cmā1. Partial Least Squares (PLS) were applied to build the regression models. Considering the highest coefficient of determination (R2) and the lowest root mean square error (RMSE) of prediction, the prediction model of GF2 and GF3 yielded the greatest when original spectra at the optimization wavelength region was used. At the same time, the SNV procedure exhibited the best for the prediction model of GF4 and total FOS. Therefore, NIR spectroscopy with the PLS technique can be suitably applied for the rapid detection of FOS in solar-dried banana syrup
Promoting the use of locally produced crops in making cereal-legume-based composite flours: an assessment of nutrient, antinutrient, mineral molar ratios, and aflatoxin content
Cassava, rice, and banana flours were used individually to replace wheat flour in cereal-legume-based composite flours. The proximate composition, mineral content, antinutritional effect, mineral molar ratios, and aflatoxin level were investigated. Replacing wheat flour with rice flour significantly (PāÆ<āÆ0.05) improved protein, fat, potassium, and phosphorus content in samples. The molar ratios of phytate or oxalate to minerals (calcium and zinc) in all composite flours were lower than the reported critical values, except phytate to iron. However, all samples, except full replacement by rice flour, might not provide adequate zinc bioavailability when the effect of calcium and phytate on zinc absorption was collectively considered. Although all composite flours were contaminated with aflatoxins, only the control composed of wheat flour did not meet the EU regulatory threshold (4.0āÆĀµg/kg) for total aflatoxins. The findings showed that nutritional properties and aflatoxin content of composite flours can be improved by replacement with local crops
Computer vision coupled with laser backscattering for non-destructive colour evaluation of papaya during drying
Aflatoxin and fumonisin mycotoxins contamination along the maize value chain in the eastern Democratic Republic of Congo
Aflatoxin and fumonisin contamination was assessed in different samples along the maize value chain in different territories of South Kivu province. Kabare and Ruzizi Plain were chosen as they represent two different agroecological areas where maize is mostly produced. Twelve districts and one town were selected across the province. The stakeholders were randomly selected, and 215 maize (139 maize grain and 76 maize flour) samples were taken for laboratory analysis. The Q + kit was used to determine the total aflatoxins and fumonisins. Three categories of maize were examined: freshly harvested dry maize, stored maize (maize stored for 3 months Ā±1.5 month) and market maize. Aflatoxin was found in 100% of the maize samples with the least content of 0.3 Āµg/kg detected in freshly harvested dry maize with mean 3.2+0.3 and levels ranging from 0.3 to 18.5 Āµg/kg. The average level of aflatoxin in stored grain samples was 97.9Ā±182 Āµg/kg within a range of 1.16 to 841.5 Āµg/kg, and the mean level of aflatoxin in stored flour was 148.9Ā±164.5 Āµg/kg with levels ranging from 2.05 to 905.1 Āµg/kg. The mean level of aflatoxin maize collected from the market was 95.1 Ā±164 Āµg/kg, with levels ranging from 1 to 823.2 Āµg/kg. Almost all the maize flour collected from the three areas had a high contamination level that exceeded the maximum tolerable limit of 10 Āµg/kg. Fumonisin was detected in all samples. However, the levels of fumonisin do not follow a specific trend with the duration of storage. The freshly harvested dry maize concentration was 2.4Ā±5.1 Āµg/g, with levels ranging from 0.03 to 20.9Āµg/g. About 37% of freshly harvested maize samples contaminated by fumonisin exceeded the maximum tolerable limit of 4 Āµg/kg. There was a difference between total fumonisin in grain and flour; the average level of fumonisin in stored maize grain was
1.4Ā±0.9 Āµg/g with levels ranging from 0.18- 4.7 Āµg/g while in flour, the level was 2.1Ā±1.3 Āµg/g with levels ranging from 0.3-4.5 Āµg/g. Almost all the maize samples collected from the three areas had a degree of contamination that did not exceed the maximum tolerable limit of 4 Āµg/g. These results indicate that the two mycotoxin levels, particularly aflatoxin, were high in the different samples collected at specific nodes. Therefore, preventing mycotoxins accumulation in maize by post-harvest prevention of contamination and growth of toxigenic moulds by promoting proper grain drying and storage should be encouraged among the actors of the maize value chain