24 research outputs found
Factors Influencing the Implementation and Maintenance of ISO 9001:2000 Standard in Selected Organisations in Malaysia
Awareness on the importance of quality and having a quality management system to
improve organizational perfonnance has been emphasized through the work of many
quality proponents. There is a growing awareness and acceptance of IS0 9000
quality management standards for establishing quality management system among
organizations in Malaysia. The number of certified organizations increased from
2022 in 2003 to 3249 in 2005 (as at June 2005) and in 2004 there was an annual
increase of 51.2% compared to 2003. The implementation and maintenance of a
quality management system is important to satisfy customers' requirements and to
ensure there is continuous improvement of the system.
This study measures the influence of various factors such as organizational factors,
motivational factors in obtaining certification and the perceived benefits on the ease
of implementing and maintaining IS0 9001:2000 quality management system. The
influence of motivation on perceived benefits was also examined.
The survey was conducted on organizations that had obtained their IS0 9000
certification and were continuing with the implementation of the system with various certification bodies at the time of the study. The scope of thls research
covered organizations in all economic sectors and industries listed in the statistics on
IS0 9000 certification by the Department of Standards Malaysia. Hypotheses were
tested using ANOVA in the Statistical Package for Social Solutions (SPSS) version
13.0 and path analysis in the LISREL 8.72.
The findings revealed that corrective and preventive actions are among the critical
issues or factors in the maintenance of an IS0 9000 system. Results also showed
that there are significant differences in ease of implementation among the industrial
sectors. The path analysis showed that there is a positive relationship between
internally perceived benefits and the ease of implementation and maintenance. It
was also established that motivation is a significant predictor which influences the
benefits gained.
It was also revealed that the motivation for obtaining IS0 9001:2000 certifications
seemed to be more internally-driven. Large percentage of respondents agreed that
motivation comes from internal factors such as the need to improve internal
operation, products, system and processes. As in many previous studies, the most
important benefits were mostly from internal factors such as improved internal
procedures or documentation and increase in quality awareness among employees.
IS0 9000 has provided a platform for a consistent organization-wide approach to
continual improvement
Low concentration of Bisphenol a induces proliferation of gastric cancer cells, HGC-27
Bisphenol A, an endocrine disrupting compound that affects human homeostasis. Studies on BPA are focusing on the impact of BPA in reproductive function and brain development. However, the effect of BPA on gut especially gastric cells is not well explored. Gut is directly in contact with ingested BPA; therefore, we aimed to determine the effect of BPA exposure on gastric cells proliferation at safe recommended concentration. Human gastric cancer cells (HGC-27) were treated with BPA at different concentration (low: 10-9M, 10-7M; high10-5M, 10-4M) and time point (24 hr, 48 hr, 72 hr). Cell viability assays were determined using MTS assay. Cells were further stained with Alexa Fluor-635 (F-actin) and Fluorescein (Hif-1α) protein for immunocytofluorescence. Data were analysed using ANOVA (p<0.05, n≥3). Cells treated with 10-9M BPA showed significance increase of cell viability after 48 hr (Mean ±SEM; 146%±0.03, p=0.01) and 72 hr (113%±0.03, p=0.00) compared to 24 hr treatment (77%±0.11, p=0.002). Similarly, cell treated with 10-7M BPA showed a significance increase after 48 hr (141%±0.03, p=0.03) and 72 hr (190%±0.03, p=0.02) compared to 24 hr cells treated with 10-7M (88%±0.05, p=0.01) and untreated (100%±0.07). Lower concentration of BPA increases the condensation of F-actin in all HGC-27 cells. Meanwhile, translocation of Hif-1α protein were observed in all BPA-exposed cells. Findings of this study revealed that BPA induced proliferation and condensation of F-actin structure of gastric cancer cells at low concentration
Effects of bisphenol a on neonatal cardiomyocytes beating rate and morphology
Bisphenol A (BPA) has been utilised excessively at a global capacity of 2.9 billion kg/year. It is widely used in manufacturing polycarbonate polymers and epoxy resins. Hence, humans are potentially exposed to this chemical substance in their daily life. As a typical endocrine disruptor, BPA exhibits detectable hormone-like properties. Many studies have been linking BPA exposure in humans with the risk of developing cardiovascular disease, however the direct exposure of BPA on cardiomyocytes beating rates and morphology have not been entirely explored. Therefore, in this study, we aimed to investigate the effects of BPA on cells structure and function of neonatal rat cardiomyocytes culture. Cardiomyocytes were isolated from 0 to 2 days old newborn rats and treated with 0.001 to 100 µM concentration of BPA. All cardiomyocytes were subjected to immunostaining, beating frequency assessment assay, MTS assay and Scanning Electron microscopy (SEM). In immunostaining, cardiomyocytes showed positive staining for F-actin. This staining allows identification of the cells thus differentiate cardiomyocytes from other cell types. Significance effects of BPA on cardiomyocytes were observed in MTS assay (p<0.05) and beating rates (p<0.01). Significant reduction (48%-64%, ± 1.5280) was observed in beating rate of cardiomyocytes exposed to 0.1 to 100 µM of BPA. Meanwhile in MTS assay, significant reduction (54%, 0.067 ± 0.0026) in cell viability was observed in cells exposed to 0.1 µM of BPA only. Interestingly, under SEM, cardiomyocytes showed altered cell surface homogeneity after BPA exposure. Exposure of 0.1 to 100 µM BPA lead to flatten of cardiomyocytes cell surface and blurring of the cell borders. This study offers an in vitro evidence of BPA effects on cardiomyocytes morphology and beating rates, thus suggest the potential adverse effect of BPA exposure. However, further investigation would be required to understand how BPA effects normal cells morphology and beating rates of heart cells
High flux polysulfone braided hollow fiber membrane for wastewater treatment role of zinc oxide as hydrophilic enhancer
Incorporation of zinc oxide (ZnO) nanoparticles has played an important role on the improvement of unique membrane characterization and performance, most notably the hydrophilic modification of the membrane for higher pure water permeability. Additionally, the permeability of the membrane can be improved via introduction of braid support by reducing the thickness of the membrane separation layer. Moreover, the braided hollow fiber membrane (BHFM) is able to perform under higher pressure conditions compared to hollow fiber membranes. In this paper, hybrid polysulfone (PSf)/ZnO BHFMs were fabricated via phase inversion method. Hydrophilic 10 ± 1.8 nm polycrystalline ZnO nanoparticles synthesized via sol-gel method were incorporated on BHFM to improve the hydrophilicity and increase flux with constant rejection under high pressure and the effect of the ZnO loading on the membrane properties and performance were thoroughly studied. The fabricated BHFMs with 0.0, 0.5, 1.0 and 1.5 wt% of ZnO nanoparticles concentration were defined as BHFM1, BHFM2, BHFM3 and BHFM4 respectively. Scanning electron microscopy (SEM), contact angle, mechanical strength, flux performance, rejection with bovine serum albumin (BSA) and fouling of best performed membrane were conducted to achieve the target of this paper. The performance of these hybrid ZnO/PSf BHFMs were compared with neat PSf hollow fiber membrane (HFM) and previous studies. The findings from this research work shows that BHFM4 has the most desired properties for wastewater treatment application. The ZnO nanoparticles in BHFM4 have improved hydrophilicity from 108.79° to 71.02°, and thus BHFM4 has increased flux performance from 36.20 to 919.12 L/m2 h at 1.0 bar pressure and 193.48 to 1909.11 L/m2h at 4.0 bar pressure when compared with BHFM1. Constant BSA rejection rates (> 90%) were observed in all BHFMs. The improved hydrophilicity and pure flux performance with constant rejection rate in high pressure conditions illustrates the suitability of fabricated ZnO/PSf BHFMs in wastewater treatment applications
WO3–based photocatalysts: A review on synthesis, performance enhancement and photocatalytic memory for environmental applications
A significant drawback of the traditional photocatalysts such as titanium dioxide (TiO2) is their inability to absorb visible light from the solar spectrum due to their wide band gap energy. They are only photoactive in the ultraviolet (UV) region which is just a little fraction of the solar spectrum and could be harmful with much exposure to it. Due to its abundance in the solar spectrum, visible light needs to be harnessed for environmental applications. However, we lack visible light driven photocatalysts with long-lasting energy storage capacity for “round-the-clock photocatalytic” (RTCP) applications. For this reason, there is a growing need to find new photocatalysts that can mitigate these bottlenecks. It is evident from some carefully selected published articles (1976–2021) that tungsten oxide (WO3) and its composites have attracted popularity in recent years because of its outstanding properties and particularly its smaller band gap energy of 2.8 eV. However, pristine WO3 is limited due to relatively low energy density and smaller specific surface area. These drawbacks can be addressed by developing various WO3 – based materials to improve their performance. This paper reviews and discusses their recent development in surface advancement, morphology control, modification of nanostructured WO3 and its composites, and their RTCP energy storage for photocatalytic activities in visible light and the dark for environmental applications. Specific aspects focused on its nature, structure, properties, synthesis, coatings, deposition, approaches at modifying and enhancing its visible light photoactivity for enhanced performance and energy storage potential
The impacts of intrauterine Bisphenol A exposure on pregnancy and expression of miRNAs related to heart development and diseases in animal model
This study aimed to examine the impact of BPA exposure on pregnancy and foetuses on cardiac tissues and the expression of cardiac microRNAs (miRNAs) related to heart development and diseases. Pregnancy is known to be the “critical windows” in determining the offspring physical and cells development in their life after birth. The increment of the risk of cardiovascular disease (CVD) in a later stage of life has been reported by few studies demonstrated from prenatal exposure of BPA. BPA has been shown to alter miRNAs expression profiles for organ development, regeneration and metabolic functions. These alterations have been associated with the risk of CVDs. However, the associations between pregnancy outcomes and miRNAs expression in cardiac of mother- and foetuses-exposed to BPA are still not entirely explored. In BPA-exposed pregnant rat groups, a significant weight gained was observed in comparison to control (p < 0.05). Interestingly, significant changes in systolic and diastolic blood pressure between the first and third trimester of BPA-exposed pregnant rats were also observed (p < 0.05). In BPA-exposed pregnant rats, miR-499-5p was significantly altered in the heart (p < 0.01). Meanwhile, altered miR-17-5p, -208-3p, and -210-3p expressions were observed in all heart of the foetuses from BPA-exposed pregnant rats (p < 0.05). In H&E staining, BPA-exposed foetal hearts showed a sign of fibrosis while BPA-exposed pregnant rats showed muscle remnant. Masson trichrome staining further confirmed the presence of fibrosis observed in BPA-exposed foetal heart and reduced expression of cardiac troponin I (cTnI) was also observed in BPA-exposed foetal heart. In summary, altered cardiac miRNAs with histological changes were observed in both mother- and foetus-exposed BPA These findings put forward the importance of future work to further understand how prenatal BPA exposure affect foetuses in their later stage of life
Fabrication of high performance PVDF hollow fiber membrane using less toxic solvent at different additive loading and air gap
Existing toxic solvents in the manufacturing of polymeric membranes have been raising concerns due to the risks of exposure to health and the environment. Furthermore, the lower tensile strength of the membrane renders these membranes unable to endure greater pressure during water treatment. To sustain a healthier ecosystem, fabrication of polyvinylidene fluoride (PVDF) hollow fiber membrane using a less toxic solvent, triethyl phosphate (TEP), with a lower molecular weight polyethylene glycol (PEG 400) (0–3 wt.%) additive were experimentally demonstrated via a phase inversion-based spinning technique at various air gap (10, 20 and 30 cm). Membrane with 2 wt.% of PEG 400 exhibited the desired ultrafiltration asymmetric morphology, while 3 wt.% PEG 400 resulting microfiltration. The surface roughness, porosity, and water flux performance increased as the loading of PEG 400 increased. The mechanical properties and contact angle of the fabricated membrane were influenced by the air gap where 20 cm indicate 2.91 MPa and 84.72◦, respectively, leading to a stronger tensile and hydrophilicity surface. Lower toxicity TEP as a solvent helped in increasing the tensile properties of the membrane as well as producing an eco-friendly membrane towards creating a sustainable environment. The comprehensive investigation in this study may present a novel composition for the robust structure of polymeric hollow fiber membrane that is suitable in membrane technology
Incorporation of N-doped TiO2 into dual layer hollow fiber (DLHF) membrane for visible light-driven photocatalytic removal of reactive black 5
This present study aims to develop a visible-light driven photocatalytic dual layer hollow fiber (DLHF) membrane for photodegradation activity. Nitrogen-doped TiO2 DLHF membranes with different loadings of N-doped TiO2 were successfully fabricated via a single step co-extrusion method. The fabricated membranes were characterized for their morphology and properties. The incorporation of N-doped TiO2 into membrane matrix has shifted the absorption capability into visible light region with lowest band gap energy obtained was 2.63eV. The photocatalytic performance evaluations of the N-doped TiO2 DLHF reported 75% and 100% of Reactive Black 5 (RB5) removal were achieved after 360 min of visible and UV light illumination respectively. Altogether, N-doped TiO2 DLHF exhibits excellent photocatalytic degradation activity under visible and UV light irradiation, hence have a promising potential in removing RB5 and other organic contaminants for water treatment
Immobilization techniques of a photocatalyst into and onto a polymer membrane for photocatalytic activity
This article reviews the various techniques of immobilizing a photocatalyst into and onto the polymer membrane for pollutant removal and as a problem solver in handling suspended photocatalyst issues from the previous literature. A particular focus is given to the preparation of mixed matrix membranes and deposition techniques for photocatalytic degradation in applications for wastewater treatment. Advantages and disadvantages in this application are evaluated. Various operating conditions during the process are presented. About 90 recently published studies (2008-2020) are reviewed. From the literature, it was found that TiO2is the most favoured photocatalyst that is frequently used in photocatalytic water treatment. Dry-wet co-spinning and sputtering techniques emerged as the promising technique for immobilizing a uniformly distributed photocatalyst within the polymeric membrane, and exhibited excellence pollutant removal. In general, the technical applicability is the key factor in selecting the best photocatalyst immobilizing technique for water treatment. Finally, the scope of various techniques that have been reviewed may provide potential for future photocatalytic study