Mathematical model of message delivery in a mobile ad hoc network

Analytic expressions for calculating the average time for delivery of a message, taking into account the effect of subscriber mobility and destructive factors are obtained. The effect of premature discontinuities of virtual connections on the efficiency of data delivery is studie

Model of neuro-fuzzy prediction of confirmation timeout in a mobile ad hoc network

This article represents an RTT prediction model based on application of fuzzy neural network theory. This model relies upon zeroorder Sugeno-Type Fuzzy Inference algorith

Method for obtaining ingots of the A34 solder based on an investigation into the relation between the structure and properties of liquid and solid metals

A comparative analysis of the influence of the modifying method on the structure and phase composition of the ingots of the A34 solder is performed. Modification is performed by force of heating the melt to 1000°C and introducing the fine-crystalline remelt in an amount of 5% of the charge amount into the melt. The investigation is performed using DTA and metallographic analysis. The structure of the ingot of the A34 solder is additionally investigated at elevated temperatures (150 and 300°C) by the sc-AFM method using the NTEGRA Therma probe nanolaboratory, and recommendations are given to optimize the modes of casting and thermal treatment. © 2013 Allerton Press, Inc

Hall helps Ohm: some corrections to negative-U centers approach to transport properties of YBa2_2Cu3_3Ox_x and La2−x_{2-x}Srx_xCuO4_4

For broad oxygen and strontium doping ranges, temperature dependences (T-dependences) of the normal state resistivity \rho(T) of YBa_2Cu_3O_x (YBCO) and La_(2-x)Sr_xCuO_4 (LSCO) are calculated and compared to experiments. Holes transport was taken in the \tau-approximation, where \tau(T,\epsilon) is due to acoustic phonons. Besides, T-dependence of the chemical potential \mu(T) and effective carrier mass m* ~10-100 free electron masses, obtained by negative-U centers modelling the T-dependence of the Hall coefficient, were used to calculate \rho(T). In addition, it is demonstrated that anisotropy of the cuprates does not affect the calculated T-variation of neither Hall coefficient nor \rho, but only rescale their magnitudes by factors depending on combinations of m_ab and m_c.Comment: 4th International Conference Fundamental Problems of High-Temperature Superconductivity, Moscow-Zvenigorod (October 3-7, 2011) Submitted to J. Supercond. Nov. Magn.: after revision. Extension for Supercond. Sci. Technol. 24 075026 (2011), DOI: 10.1088/0953-2048/24/7/075026 Contains: 2 pages, 3 figure

Microwave Absorption of Surface-State Electrons on Liquid 3^3He

We have investigated the intersubband transitions of surface state electrons (SSE) on liquid $^3$He induced by microwave radiation at temperatures from 1.1 K down to 0.01 K. Above 0.4 K, the transition linewidth is proportional to the density of $^3$He vapor atoms. This proportionality is explained well by Ando's theory, in which the linewidth is determined by the electron - vapor atom scattering. However, the linewidth is larger than the calculation by a factor of 2.1. This discrepancy strongly suggests that the theory underestimates the electron - vapor atom scattering rate. At lower temperatures, the absorption spectrum splits into several peaks. The multiple peak structure is partly attributed to the spatial inhomogeneity of the static holding electric field perpendicular to the electron sheet.Comment: 15 pages, 7 figures, submitted to J. Phys. Soc. Jp

The Bending Magnets for the Proton Transfer Line of CNGS

The project "CERN neutrinos to Gran Sasso (CNGS)", a collaboration between CERN and the INFN (Gran Sasso Laboratory) in Italy, will study neutrino oscillations in a long base-line experiment. High-energy protons will be extracted from the CERN SPS accelerator, transported through a 727 m long transfer line and focused onto a graphite target to produce a beam of pions and kaons and subsequently neutrinos. The transfer line requires a total of 78 dipole magnets. They were produced in the framework of an in-kind contribution of Germany via DESY to the CNGS project. The normal conducting dipoles, built from laminated steel cores and copper coils, have a core length of 6.3 m, a 37 mm gap height and a nominal field range of 1.38 T - 1.91 T at a maximum current of 4950 A. The magnet design was a collaboration between CERN and BINP. The half-core production was subcontracted to EFREMOV Institute; the coil fabrication, magnet assembly and the field measurements were concluded at BINP in June 2004. The main design issues and results of the acceptance tests, including mechanical, electrical and magnetic field measurements, are discussed

Fermion confinement induced by geometry

We consider a five-dimensional model in which fermions are confined in a hypersurface due to an interaction with a purely geometric field. Inspired by the Rubakov-Shaposhnikov field-theoretical model, in which massless fermions can be localized in a domain wall through the interaction of a scalar field, we show that particle confinement may also take place if we endow the five-dimensional bulk with a Weyl integrable geometric structure, or if we assume the existence of a torsion field acting in the bulk. In this picture, the kind of interaction considered in the Rubakov-Shaposhnikov model is replaced by the interaction of fermions with a geometric field, namely a Weyl scalar field or a torsion field. We show that in both cases the confinement is independent of the energy and the mass of the fermionic particle. We generalize these results to the case in which the bulk is an arbitrary n-dimensional curved space.Comment: 8 page

Experimental study of direct photon emission in K- --> pi- pi0 gamma decay using ISTRA+ detector

The branching ratio in the charged-pion kinetic energy region of 55 to 90 MeV for the direct photon emission in the K- --> pi- pi0 gamma decay has been measured using in-flight decays detected with the ISTRA+ setup operating in the 25 GeV/c negative secondary beam of the U-70 PS. The value Br(DE)=[0.37+-0.39(stat)+-0.10(syst)]*10^(-5) obtained from the analysis of 930 completely reconstructed events is consistent with the average value of two stopped-kaon experiments, but it differs by 2.5 standard deviations from the average value of three in-flight-kaon experiments. The result is also compared with recent theoretical predictions.Comment: 13 pages, 8 figure

GeantV: Results from the prototype of concurrent vector particle transport simulation in HEP

Full detector simulation was among the largest CPU consumer in all CERN experiment software stacks for the first two runs of the Large Hadron Collider (LHC). In the early 2010's, the projections were that simulation demands would scale linearly with luminosity increase, compensated only partially by an increase of computing resources. The extension of fast simulation approaches to more use cases, covering a larger fraction of the simulation budget, is only part of the solution due to intrinsic precision limitations. The remainder corresponds to speeding-up the simulation software by several factors, which is out of reach using simple optimizations on the current code base. In this context, the GeantV R&D project was launched, aiming to redesign the legacy particle transport codes in order to make them benefit from fine-grained parallelism features such as vectorization, but also from increased code and data locality. This paper presents extensively the results and achievements of this R&D, as well as the conclusions and lessons learnt from the beta prototype.Comment: 34 pages, 26 figures, 24 table