1,313 research outputs found
Aprovechamiento de la lejias residuales resultantes del decapado del hierro con ácido clorhidrico para la obtención de pigmentos
El objetivo de la investigación que se presenta en esta memoria es proponer un procedimiento para tratar las lejías residuales procedentes del decapado del hierro en bandas con ácido clorhídrico, en el que se recupera el hierro en forma de pigmentos que puedan ser utilizados en la industria de pinturas. Con ello, además de reducir la contaminación acuosa, se logra la revalorización del residuo ferroso. Se llega a la conclusión de que el proceso propuesto es valido por el rendimiento de recuperación del fe, por la velocidad de reacción y por la calidad de los productos obtenidos, pudiendo con la investigación desarrollada seleccionar las condiciones óptimas de oxiprecipitación para obtener los máximos rendimientos de eliminación de fe y productos sólidos de contrastada calidad pigmentaria.Depto. de Ingeniería Química y de MaterialesFac. de Ciencias QuímicasTRUEpu
Internal Treatment of Process Waters in Paper Production by Dissolved Air Flotation with Newly Developed Chemicals. 1. Laboratory Tests
New chemicals, based on the synergistic effect between inorganic polyaluminium salts and organic cationic polyelectrolytes, have been tested for the chemical optimization of a dissolved air flotation (DAF) unit, used as internal treatment of process waters in a paper mill based on 100% recovered paper. Laboratory tests have demonstrated that polyamine modifications of the aluminum salts are the most efficient in the removal of contaminants, the combination of a polyaluminium nitrate sulfate salt and a polyamine being the most efficient. This chemical has been studied under different conditions, such as different dosages or in combination with a flocculant for the treatment of waters from different paper grades production, and the results have demonstrated a good performance at laboratory scale. Therefore, a field trial has been recommended for assessing its potential benefits at mill scale, which will be described in a future paper
Characterisation of agricultural residues used as a source of fibres for fibre-cement production
Nowadays, certain components of non-wood annual plants such as corn stalk and industrial hemp core are considered waste materials or used in low value applications; both by-products have a very low cost. On the other hand, given the large quantities of these materials generated worldwide and their renewable character, it is reasonable to explore new routes for their exploitation. The aim of this paper is to study the potential of both corn stalk (Zea Mays L.) and industrial hemp core (Cannabis Sativa L.) fibres as a renewable source of cellulose fibres in the production of fibre-cement. For each source of fibres, a number of chemical cooking treatments were studied. The morphological properties of the fibres were determined using a scanning electron microscope and a fibre and pulp morphological analyser. Pulp refining was carried out in a PFI mill to improve the characteristics of the fibres. In the case of corn fibres, different degrees of refining were applied. The fibre flocculation process was investigated using several polyacrylamides. The process was studied by monitoring the chord size distribution in real time by means of a focused beam reflectance measurement probe.
The results indicated both pulps can be used for the production of fibre-cement, having the two types of pulp morphological similarities with the pine fibres currently used.
Through the flocculation process it was concluded the floc size depends on the length of the fibres
Recycled Fibers for Sustainable Hybrid Fiber Cement Based Material: A Review
Reinforcing fibers have been widely used to improve physical and mechanical properties of cement-based materials. Most fiber reinforced composites (FRC) involve the use of a single type of fiber to improve cement properties, such as strength or ductility. To additionally improve other parameters, hybridization is required. Another key challenge, in the construction industry, is the implementation of green and sustainable strategies based on reducing raw materials consumption, designing novel structures with enhanced properties and low weight, and developing low environmental impact processes. Different recycled fibers have been used as raw materials to promote circular economy processes and new business opportunities in the cement-based sector. The valuable use of recycled fibers in hybrid FRC has already been proven and they improve both product quality and sustainability, but the generated knowledge is fragmented. This is the first review analyzing the use of recycled fibers in hybrid FRC and the hybridization effect on mechanical properties and workability of FRC. The paper compiles the best results and the optimal combinations of recycled fibers for hybrid FRC to identify key insights and gaps that may define future research to open new application fields for recycled hybrid FRC.TRUEComunidad de Madridpu
Hexavalent Chromium Removal from Industrial Wastewater by Adsorption and Reduction onto Cationic Cellulose Nanocrystals
Cationic cellulose nanocrystals (CCNC) are lignocellulosic bio-nanomaterials that present large, specific areas rich with active surface cationic groups. This study shows the adsorption removal of hexavalent chromium (Cr(VI)) from industrial wastewaters by the CCNC. The CCNC were synthetized through periodate oxidation and Girard’s reagent-T cationization. The high value of CCNCs cationic groups and anionic demand reveal probable nanocrystal-Cr(VI) attraction. Adsorption was performed with synthetic Cr(VI) water at different pH, dosage, Cr(VI) concentration and temperature. Fast removal of Cr(VI) was found while operating at pH 3 and 100 mg·L −1 of dosage. Nevertheless, a first slower complete removal of chromium was achieved by a lower CCNC dosage (40 mg·L −1 ). Cr(VI) was fully converted by CCNC into less-toxic trivalent species, kept mainly attached to the material surface. The maximum adsorption capacity was 44 mg·g −1 . Two mechanisms were found for low chromium concentrations (Pseudo-first and pseudo-second kinetic models and continuous growth multi-step intraparticle) and for high concentrations (Elovich model and sequential fast growth-plateau-slow growth intraparticle steps). The Sips model was the best-fitting isotherm. Isotherm thermodynamic analysis indicated a dominant physical sorption. The Arrhenius equation revealed an activation energy between physical and chemical adsorption. CCNC application at selected conditions in industrial wastewater achieved a legal discharge limit of 40 min.Depto. de Ingeniería Química y de MaterialesFac. de Ciencias QuímicasTRUEComunidad de Madrid y Ministerio de Economía y CompetitividadMinisterio de Economía y Competitividadpu
Application of multi-barrier membrane filtration technologies to reclaim municipal wastewater for industrial use
Producción CientíficaThe significant percentage of the world water consumption devoted to industrial use, along with an increasingly higher environmental concern of society, has awaken the interest of industry on using municipal reclaimed water for replacing fresh water use coming from utilities or natural resources. Depending on the type of industry and the specific application, water must meet certain quality requirements. Therefore, those water quality standards that are required for those most relevant industrial applications wherein the use of reclaimed water has noticeably been reported are herewith reviewed. Although the use of internal water treatments for recycling and reusing their own effluents has recently and widely been reported within many industrial sectors worldwide, the substitution of fresh water by reclaimed municipal wastewater has yet to be extended much. The increasing proportion of municipal wastewater reclamation plants that rely on membrane filtration technologies versus the total number of reclamation facilities that are distributed worldwide is also assessed within this review, including the discussion of their main related drawbacks.Comunidad Autónoma de Madrid - (Proyecto S-0505/AMB-0100)Ministerio de Ciencia e Innovación - (Proyecto CTM2008-06886-C02- 01)Unión Europea - (Project 211534
Nanocelluloses: Natural-Based Materials for Fiber-Reinforced Cement Composites. A Critical Review
Nanocelluloses (NCs) are bio-based nano-structurated products that open up new solutions for natural material sciences. Although a high number of papers have described their production, properties, and potential applications in multiple industrial sectors, no review to date has focused on their possible use in cementitious composites, which is the aim of this review. It describes how they could be applied in the manufacturing process as a raw material or an additive. NCs improve mechanical properties (internal bonding strength, modulus of elasticity (MOE), and modulus of rupture (MOR)), alter the rheology of the cement paste, and affect the physical properties of cements/cementitious composites. Additionally, the interactions between NCs and the other components of the fiber cement matrix are analyzed. The final result depends on many factors, such as the NC type, the dosage addition mode, the dispersion, the matrix type, and the curing process. However, all of these factors have not been studied in full so far. This review has also identified a number of unexplored areas of great potential for future research in relation to NC applications for fiber-reinforced cement composites, which will include their use as a surface treatment agent, an anionic flocculant, or an additive for wastewater treatment. Although NCs remain expensive, the market perspective is very promising
Optimization of reagent consumption in TEMPO-mediated oxidation of Eucalyptus cellulose to obtain cellulose nanofibers
Eucalyptus cellulose is usually pre-treated by oxidation with 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO), NaBr and NaClO at pH 10.5 and 25 °C before the mechanical process required to obtain cellulose nanofibers (CNFs). In this study, different aspects to improve the effectiveness and sustainability of the TEMPO-mediated oxidation are analyzed. The optimization was carried out at different reaction times by modifying both the concentration of the NaClO and the amount of the catalysts (TEMPO and NaBr). Results show that the carboxyl groups increased up to 1.1 mmol/g with 5 mmol NaClO/g after 50 min, and that the catalyst concentration can be reduced to 0.025 mmol TEMPO/g and 0.5 mmol NaBr/g to minimize costs while maintaining the high fibrillation degree of the CNFs. The kinetic of the reaction can be considered as zero-order with respect to NaClO, and as first order with respect to cellulose. As a result of this work, the catalyst doses are reduced up to 75% compared to the most widely used catalyst doses (0.1 mmol/g TEMPO and 1 mmol/g NaBr), obtaining highly fibrillated CNFs with a lower environmental impact. This reduction of catalyst doses will reduce the costs and facilitate the implementation of CNF production at industrial scale
Modeling of Hexavalent Chromium Removal with Hydrophobically Modified Cellulose Nanofibers
Cellulose nanofibers (CNF) are sustainable nanomaterials, obtained by the mechanical disintegration of cellulose, whose properties make them an interesting adsorbent material due to their high specific area and active groups. CNF are easily functionalized to optimize the performance for different uses. The hypothesis of this work is that hydrophobization can be used to improve their ability as adsorbents. Therefore, hydrophobic CNF was applied to adsorb hexavalent chromium from wastewater. CNF was synthetized by TEMPO-mediated oxidation, followed by mechanical disintegration. Hydrophobization was performed using methyl trimetoxysilane (MTMS) as a hydrophobic coating agent. The adsorption treatment of hexavalent chromium with hydrophobic CNF was optimized by studying the influence of contact time, MTMS dosage (0–3 mmol·g −1 CNF), initial pH of the wastewater (3–9), initial chromium concentration (0.10–50 mg·L −1 ), and adsorbent dosage (250–1000 mg CNF·L −1 ). Furthermore, the corresponding adsorption mechanism was identified. Complete adsorption of hexavalent chromium was achieved with CNF hydrophobized with 1.5 mmol MTMS·g −1 CNF with the faster adsorption kinetic, which proved the initial hypothesis that hydrophobic CNF improves the adsorption capacity of hydrophilic CNF. The optimal adsorption conditions were pH 3 and the adsorbent dosage was over 500 mg·L −1 . The maximum removal was found for the initial concentrations of hexavalent chromium below 1 mg·L −1 and a maximum adsorption capacity of 70.38 mg·g −1 was achieved. The kinetic study revealed that pseudo-second order kinetics was the best fitting model at a low concentration while the intraparticle diffusion model fit better for higher concentrations, describing a multi-step mechanism of hexavalent chromium onto the adsorbent surface. The Freundlich isotherm was the best adjustment model.TRUEComunidad de MadridMinisterio de Economía y Competitividadpu
Treatment of a Mature Landfill Leachate: Comparison between Homogeneous and Heterogeneous Photo-Fenton with Different Pretreatments
This study focuses on the treatment of a mature landfill leachate by coagulation and photo-Fenton at different conditions. Optimal coagulation is carried out with ferric chloride in acid conditions; and with alum in near-neutral conditions, to minimize the use of sulphuric acid for pH adjustment (1 g/L vs. 7.2 g/L), the generation of sludge and the increase of conductivity in the final effluent. In both cases, a similar chemical oxygen demand (COD) removal is obtained, higher than 65%, which is high enough for a subsequent photo-Fenton treatment. However, the removal of absorbance at 254 nm (UV-254) was significantly higher with ferric chloride (83% vs. 55%), due to the important removal of humic acids at acid pH. The best results for coagulation are 2 g/L ferric chloride at initial pH = 5 and 5 g/L alum at initial pH = 7. After coagulation with ferric chloride, the final pH (2.8) is adequate for a homogeneous photo-Fenton using the remaining dissolved iron (250 mg/L). At these conditions, using a ratio H2O2/COD = 2.125 and 30 min contact time, the biodegradability increased from 0.03 to 0.51. On the other hand, the neutral pH after alum coagulation (6.7) allows the use of zero valent iron (ZVI) heterogeneous photo-Fenton. In this case, a final biodegradability of 0.32 was obtained, after 150 min, using the same H2O2/COD ratio. Both treatments achieved similar results, with a final COD, UV-254 and color removal greater than 90%. However, the economic assessment shows that the approach of ferric chloride + homogeneous photo-Fenton is much cheaper (6.4 €/m3 vs. 28.4 €/m3). Although the discharge limits are not achieved with the proposed combination of treatments, the significant increase of the pre-treated leachate biodegradability allows achieving the discharge limits after a conventional biological treatment such as sequencing batch reactor, which would slightly increase the total treatment cost
- …