33 research outputs found
Ultrafast magnetization dynamics studies using an x-ray streak camera
The spin dynamics of ferromagnetic thin films following an excitation by ultrashort 100-fs near-infrared laser pulses has recently received much attention. Here, a new approach is described using x-ray magnetic circular dichroism to investigated emagnetization and magnetization switching processes. In contrast to magneto-optical measurements, x-ray dichroism has the advantage of determining separately the spin and orbital components of the magnetic moment. The relatively low time resolution of the synchrotron x-ray probe pulses (80 ps FWHM) is overcome by employing an ultrafast x-ray streak camera with a time resolution of <1 ps. A description of the experimental setup including the x-ray/IR laser pulse synchronization and the streak camera is given
Thermal limit to the intrinsic emittance from metal photocathodes
Measurements of the intrinsic emittance and transverse momentum distributions obtained from a metal (antimony thin film) photocathode near and below the photoemission threshold are presented. Measurements show that the intrinsic emittance is limited by the lattice temperature of the cathode as the incident photon energy approaches the photoemission threshold. A theoretical model to calculate the transverse momentum distributions near this photoemission threshold is presented. An excellent match between the experimental measurements and the theoretical calculations is demonstrated. These measurements are relevant to low emittance electron sources for Free Electron Lasers and Ultrafast Electron Diffraction experiments
Recommended from our members
Aerosol measurements from plasma torch cuts on stainless steel, carbon steel, and aluminum
The main purpose of this project is to quantify aerosol particle size and generation rates produced by a plasma torch whencutting stainless steel, carbon steel and aluminum. the plasma torch is a common cutting tool used in the dismantling of nuclear facilities. Eventually, other cutting tools will be characterized and the information will be compiled in a user guide to aid in theplanning of both D&D and other cutting operations. The data will be taken from controlled laboratory experiments on uncontaminated metals and field samples taken during D&D operations at ANL nuclear facilities. The plasma torch data was collected from laboratory cutting tests conducted inside of a closed, filtered chamber. The particle size distributions were determined by isokinetically sampling the exhaust duct using a cascade impactor. Cuts on different thicknesses showed there was no observable dependence of the aerosol quantity produced as a function of material thickness for carbon steel. However, data for both stainless steel and aluminum revealed that the aerosol mass produced for these materials appear to have some dependance on thickness, with thinner materials producing tmore aerosols. The results of the laboratory cutting tests show that most measured particle size distributions are bimodal with one mode at about 0.2 {mu}m and the other at about 10 {mu}m. The average Mass Median Aerodynamic Diameters (MMAD`s) for these tests are 0.36 {+-}0.08 {mu}m for stainless steel, 0.48 {+-}0.17{mu}m for aluminum and 0.52{+-}0.12 {mu}m for carbon steel
Recommended from our members
An ultrafast x-ray detector system at an elliptically polarizingundulator beamline
An ultrafast x-ray detector system is under development atLawrence Berkeley National Laboratory (LBNL) for application primarily tostudyies of ultrafast magnetization dynamics. The system consists of a fslaser, an x-ray streak camera and an ellipitically polarization undulator(EPU) beamline. Polarized x-rays from an EPU can be used to measure x-raymagnetic circular dichroism (XMCD) of a sample. XMCD has the uniqueability to independently measure orbit and spin magnetization withsub-monolayer sensitivity and element specificity. The streak camera hassimultaneously a sub-picosecond temporal resolution and a high spatialresolution. The combination of the streak camera and EPU allows us tostudy the transfer of angular momentum from spin to orbit to the latticein the sample on an ultrafast time scale. We describe here theperformance of the ultrafast detector, the laser and the x-raysynchronization system. The observation of the demagnetization process ofdifferent samples demonstrates the ability of the apparatus
Element-specific spin and orbital momentum dynamics of Fe/Gdmultilayers
The role of orbital magnetism in the laser-induced demagnetization of Fe/Gd multilayers was investigated using time-resolved X-ray magnetic circular dichroism at 2-ps time resolution given by an x-ray streak camera. An ultrafast transfer of angular momentum from the spin via the orbital momentum to the lattice was observed which was characterized by rapidly thermalizing spin and orbital momenta. Strong interlayer exchange coupling between Fe and Gd led to a simultaneous demagnetization of both layers
Recommended from our members
Mechanical design and finite element analysis of the SDC central calorimeter
When designing scintillating calorimeters for the study of particle interactions resulting from colliding beams, a primary goal is to instrument 100% of the available solid angle. In pursuit of this goal the challenge for mechanical designers is to minimize the amount of structural mass and still maintain acceptable engineering standards in the design. Argonne National Laboratory, High Energy Physics involvement in the design of a central calorimeter for the SSC started in 1989. Our first proposal was to design a depleted uranium scintillator calorimeter similar to the ZEUS detector presently installed at the HERA electron-proton collider in Hamburg, Germany. Argonne was involved at the time in final assembly of modules for ZEUS that had been designed and constructed at ANL. Due to the cost of using depleted uranium, lead was chosen as the absorber material. In collaboration with Westinghouse Science and Technology Center in Pittsburgh, Pennsylvania was embarked on a program to optimize the use of lead or lead alloys in the construction of the calorimeter. A cast lead design for the calorimeter evolved from this effort. Subsequent to this design, further pressure to reduce costs have now dictated a design which contains lead only in the electromagnetic sections of the calorimeter. The finite element analysis we will present here was done using lead for the HAD1 section of the barrel
Element-specific spin and orbital momentum dynamics of Fe/Gd multilayers
The role of orbital magnetism in the laser-induced demagnetization of Fe/Gd multilayers was investigated using time-resolved X-ray magnetic circular dichroism at 2-ps time resolution given by an xray streak camera. An ultrafast transfer of angular momentum from the spin via the orbital momentum to the lattice was observed which was characterized by rapidly thermalizing spin and orbital momenta. Strong interlayer exchange coupling between Fe and Gd led to a simultaneous demagnetization of both layers. 1 Author to whom correspondence should be addressed; electronic mail: [email protected]. 2 Ultrafast magnetic storage and processing is founded on our ability to control magnetism on picosecond and femtosecond time scales. Magnetic phase transitions conserve the total angular momentum and usually involve the crystal lattice as a quasi-infinite reservoir of angular momentum. A prototypical ultrafast magnetic phenomenon is the demagnetization after excitation by an intense laser pulse The Fe/Gd multilayer consists of two metals of very different electronic structure. Fe has exchange-split 3d spin bands which intersect the Fermi surface, allowing both low-energy spin-flip (Stoner) and spin wave excitations (magnons). The spin momentum dominates the total angular momentum while the orbital momentum is quenched by the strong ligand field and only partially restored by the spin-orbit interaction. The coupling of the orbital momentum to the anisotropic ligand field enables the flow of angular momentum from the spin system to the lattice during the demagnetization. A direct photon-driven exchange of spin and orbital momentum as proposed by Hübner 3 Early experiments on Gd suggested a slow laser-induced demagnetization in tens of picoseconds Our experiments were performed on a stack of 20 alternating 0.5-nm Fe and Gd layers grown on top of a 200-nm Al heat sink, protected by a thin Al cap layer, and supported by a 100 nm silicon nitride membrane. At and above room temperature the easy magnetization direction was out-of-plane. The thin layers were antiferromagnetically coupled with a common Curie temperature of about 230°C. In order to separate the transient dynamics of the Fe 3d and Gd 4f spin and orbital momenta in the Fe/Gd multilayer, we extended time-resolved XMCD [12, 13] into a laser pump -x-ray probe technique. XMCD has the unique ability to separate and quantify spin and orbital momenta with element specificity Also, XMCD avoids laser pump-induced state-filling effects since the spin-dependent band occupation is determined by recording the absorption cross-section for circularly polarized x-rays, exciting electrons from a spin-orbit-split core level into the valence states. Integration over the absorption resonances accounts for all unoccupied states. The demagnetization dynamics was initiated by heating the sample above the Curie temperature with 60-fs (full width at half maximum (FWHM)) long 800-nm laser pulses at an intensity of 20 mJ/cm 2 and 5 kHz, and probed with 60-ps (FWHM) x-ray pulses from the elliptically polarizing undulator beamline 4.0 at the Advanced Light Source Two representative streaked x-ray pulses are shown in Starting from the integrated transient Fe L 3,2 and Gd M 4,5 dichroism, the transient spin momentum m s (t) = <S z > and orbital momentum m l (t) = <L z > were determined by using sum rules orbital momentum m l (t) before and after t=0 is zero-within experimental errors-in agreement with our expectation that the Gd 4f demagnetization occurs indirectly via exchange with Gd 5d states. The Fe 3d orbital momentum m l (t) decays simultaneously with the Fe spin momentum m s (t). This can be seen more clearly when 5 m l (t) and m s (t) are normalized to their values before t=0, The ultrafast dynamics in Fe/Gd is a true demagnetization as angular momentum is transferred from spin and orbital momentum to the lattice, which acts as a sink. The demagnetization is not primarily the result of a rearrangement of angular momentum between spin and orbit, which would be visible as a change in the orbital to spin momentum ratio. Note that a partial demagnetization in a non-equilibrium situation may be possible without coupling to the lattice because of the different g-factors of electron spin and orbital momenta. It is clear that the Fe spin-orbit interaction does not constitute a bottleneck in the demagnetization of Fe/Gd because the Fe spin and orbital momenta are in or close to equilibrium. The slow dynamics in Fe/Gd, compared to N