25,258 research outputs found
Equal Employment Opportunity Commission, Plaintiff, v. Quality Foods Cooperative, Inc., Defendant.
Strong Coupling of a Cavity QED Architecture for a Current-biased Flux Qubit
We propose a scheme for a cavity quantum electrodynamics (QED) architecture
for a current-biased superconducting flux qubit with three Josephson junctions.
The qubit operation is performed by using a bias current coming from the
current mode of the circuit resonator. If the phase differences of junctions
are to be coupled with the bias current, the Josephson junctions should be
arranged in an asymmetric way in the qubit loop. Our QED scheme provides a
strong coupling between the flux qubit and the transmission line resonator of
the circuit.Comment: 5 pages, 3 figure
Design, development and performance study of six-gap glass MRPC detectors
The Multigap Resistive Plate Chambers (MRPCs) are gas ionization detectors
with multiple gas sub-gaps made of resistive electrodes. The high voltage (HV)
is applied on the outer surfaces of outermost resistive plates only, while the
interior plates are left electrically floating. The presence of multiple narrow
sub--gaps with high electric field results in faster signals on the outer
electrodes, thus improving the detector's time resolution. Due to their
excellent performance and relatively low cost, the MRPC detector has found
potential application in Time-of-Flight (TOF) systems. Here we present the
design, fabrication, optimization of the operating parameters such as the HV,
the gas mixture composition, and, performance of six--gap glass MRPC detectors
of area 27cm 27 cm, which are developed in order to find application
as trigger detectors, in TOF measurement etc. The design has been optimized
with unique spacers and blockers to ensure a proper gas flow through the narrow
sub-gaps, which are 250 m wide. The gas mixture consisting of R134A,
Isobutane and SF, and the fraction of each constituting gases has been
optimized after studying the MRPC performance for a set of different
concentrations. The counting efficiency of the MRPC is about 95% at kV.
At the same operating voltage, the time resolution, after correcting for the
walk effect, is found to be about ps.Comment: Revised version with 15 pages, 14 figures, 2 tables. Accepted for
publication in the European Physical Journal
A MULTI-ATTRIBUTE MODEL OF PUBLIC ACCEPTANCE OF GENETICALLY MODIFIED ORGANISMS
Using Fishbein's multiattribute model as a theoretical background, this paper develops an empirical model to assess and identify attributes of agrobiotechnology and individual characteristics determining public acceptance of biotech foods. This paper uses a database collected in the United States and United Kingdom in November, 2000.Consumer/Household Economics, Research and Development/Tech Change/Emerging Technologies,
Anisotropic Transport of Quantum Hall Meron-Pair Excitations
Double-layer quantum Hall systems at total filling factor can
exhibit a commensurate-incommensurate phase transition driven by a magnetic
field oriented parallel to the layers. Within the commensurate
phase, the lowest charge excitations are believed to be linearly-confined Meron
pairs, which are energetically favored to align with . In order
to investigate this interesting object, we propose a gated double-layer Hall
bar experiment in which can be rotated with respect to the
direction of a constriction. We demonstrate the strong angle-dependent
transport due to the anisotropic nature of linearly-confined Meron pairs and
discuss how it would be manifested in experiment.Comment: 4 pages, RevTex, 3 postscript figure
Analysis of edge impact stresses in composite plates
The in-plane edge impact of composite plates, with or without a protection strip, is investigated. A computational analysis based on the Fast Fourier Transform technique is presented. The particular application of the present method is in the understanding of the foreign object damage problem of composite fan blades. The method is completely general and may be applied to the study of other stress wave propagation problems in a half space. Results indicate that for the protective strip to be effective in reducing impact stresses in the composite the thickness must be equal or greater than the impact contact dimension. Large interface shear stresses at the strip - composite boundary can be induced under impact
Heat transfer in the tip region of a rotor blade simulator
The objective of this study of heat transfer in the tip region of a rotor blade simulator is to acquire, through experimental and computational approaches, improved understanding of the nature of the flow and convective heat transfer in the blade tip region. Such information should enable designers to make more accurate predictions of performance and durability, and should support the future development of improved blade tip cooling schemes
Heat transfer in the tip region of a rotor blade simulator
In gas turbines, the blades of axial turbine stages rotate in close proximity to a stationary peripheral wall. Differential expansion of the turbine wheel, blades, and the shroud causes variations in the size of the clearance gap between blade tip and stationary shroud. The necessity to tolerate this differential thermal expansion dictates that the clearance gap cannot be eliminated altogether, despite accurate engine machining. Pressure differences between the pressure and suction sides of a blade drives a flow through the clearance gap. This flow, the tip leakage flow, is detrimental to engine performance. The primary detrimental effect of tip leakage flow is the reduction of turbine stage efficiency, and a second is the convective heat transfer associated with the flow. The surface area at the blade tip in contact with the hot working gas represents an additional thermal loading on the blade which, together with heat transfer to the suction and pressure side surface area, must be removed by the blade internal cooling flows. Experimental results concerned with the local heat transfer characteristics on all surfaces of shrouded, rectangular cavities are reported. A brief discussion of the mass transfer system used is given
Analog VLSI neural network integrated circuits
Two analog very large scale integration (VLSI) vector matrix multiplier integrated circuit chips were designed, fabricated, and partially tested. They can perform both vector-matrix and matrix-matrix multiplication operations at high speeds. The 32 by 32 vector-matrix multiplier chip and the 128 by 64 vector-matrix multiplier chip were designed to perform 300 million and 3 billion multiplications per second, respectively. An additional circuit that has been developed is a continuous-time adaptive learning circuit. The performance achieved thus far for this circuit is an adaptivity of 28 dB at 300 KHz and 11 dB at 15 MHz. This circuit has demonstrated greater than two orders of magnitude higher frequency of operation than any previous adaptive learning circuit
- …