91 research outputs found
Gallium Arsenide preparation and QE Lifetime Studies using the ALICE Photocathode Preparation Facility
In recent years, Gallium Arsenide (GaAs) type photocathodes have become
widely used as electron sources in modern Energy Recovery Linac based light
sources such as the Accelerators and Lasers in Combined Experiments (ALICE) at
Daresbury Laboratory and as polarised electron source for the proposed
International Linear Collider (ILC). Once activated to a Low Electron Affinity
(LEA) state and illuminated by a laser, these materials can be used as a
high-brightness source of both polarised and un-polarised electrons. This paper
presents an effective multi-stage preparation procedure including heat
cleaning, atomic hydrogen cleaning and the activation process for a GaAs
photocathode. The stability of quantum efficiency (QE) and lifetime of
activated to LEA state GaAs photocathode have been studied in the ALICE
load-lock photocathode preparation facility which has a base pressure in the
order of 10^-11 mbar. These studies are supported by further experimental
evidence from surface science techniques such as X-ray Photoelectron
Spectroscopy (XPS) to demonstrate the processes at the atomic level.Comment: Presented at First International Particle Accelerator Conference,
IPAC'10, Kyoto, Japan, from 23 to 28 May 201
Transverse phase space characterization in an accelerator test facility
We compare three techniques for characterising the transverse phase space
distribution of the beam in CLARA FE (the Compact Linear Accelerator for
Research and Applications Front End, at Daresbury Laboratory, UK): emittance
and optics measurements using screens at three separate beamline locations;
quadrupole scans; and phase space tomography. We find that where the beam
distribution has significant structure (as in the case of CLARA FE at the time
the measurements presented here were made) tomography analysis is the most
reliable way to obtain a meaningful characterisation of the transverse beam
properties. We present the first experimental results from four-dimensional
phase space tomography: our results show that this technique can provide an
insight into beam properties that are of importance for optimising machine
performance
Beam dynamic analysis of RF modulated electron beam produced by gridded thermionic guns
A thermionic cathode gridded electron gun used in injectors for different types of circular and linear particle accelerators and for energy recovery configurations was studied. Both theory and numerical simulation were used to explore the relationship between the bunch charge and bunch length. The electron gun is based on a Pierce-type geometry. It was initially designed using Vaughan synthesis followed by optimization using a 2D electron trajectory solver TRAK. After optimization, the grid in front of the cathode was inserted and the RF field was introduced through a coaxial waveguide structure. The complete gun was simulated using the PIC code MAGIC. High duty cycle operations at frequencies 1.5 GHz and 3.0 GHz, were investigated using different combinations of both the bias and the RF voltage applied between the cathode and the grid. The beam dynamics results from the PIC showed that a minimum bunch length of 106 ps could be achieved with a bunch charge of 33 pC when the driving RF frequency was 1.5 GHz. Operating at the higher RF frequency of 3GHz did not significantly reduce the bunch length. The normalized emittance of about 5.6 mm-mrad was demonstrated in PIC simulations
A plasma wakefield acceleration experiment using CLARA beam
We propose a Plasma Accelerator Research Station (PARS) based at proposed FEL
test facility CLARA (Compact Linear Accelerator for Research and Applications)
at Daresbury Laboratory. The idea is to use the relativistic electron beam from
CLARA, to investigate some key issues in electron beam transport and in
electron beam driven plasma wakefield acceleration, e.g. high gradient plasma
wakefield excitation driven by a relativistic electron bunch, two bunch
experiment for CLARA beam energy doubling, high transformer ratio, long bunch
self-modulation and some other advanced beam dynamics issues. This paper
presents the feasibility studies of electron beam transport to meet the
requirements for beam driven wakefield acceleration and presents the plasma
wakefield simulation results based on CLARA beam parameters. Other possible
experiments which can be conducted at the PARS beam line are also discussed
p-GaAs(Cs,O)-photocathodes: Demarcation of domains of validity for practical models of the activation layer
Spin-Momentum Correlations in Quasi-Elastic Electron Scattering from Deuterium
We report on a measurement of spin-momentum correlations in quasi-elastic
scattering of longitudinally polarized electrons with an energy of 720 MeV from
vector-polarized deuterium. The spin correlation parameter was
measured for the reaction for missing
momenta up to 350 MeV/ at a four-momentum transfer squared of 0.21
(GeV/c). The data give detailed information about the spin structure of the
deuteron, and are in good agreement with the predictions of microscopic
calculations based on realistic nucleon-nucleon potentials and including
various spin-dependent reaction mechanism effects. The experiment demonstrates
in a most direct manner the effects of the D-state in the deuteron ground-state
wave function and shows the importance of isobar configurations for this
reaction.Comment: 4 pages, 3 figures, submitted to Phys. Rev. Lett. for publicatio
The conceptual design of CLARA, a novel fel test facility for ultra-short pulse generation
CLARA will be a novel FEL test facility focussed on the generation of ultra-short photon pulses with extreme levels of stability and synchronisation. The principal aim is to experimentally demonstrate that sub-cooperation length pulse generation with FELs is viable, and to compare the various schemes being championed. The results will translate directly to existing and future X-ray FELs, enabling them to generate attosecond pulses, thereby extending their science capabilities. This paper gives an overview of the motivation for CLARA, describes the facility design (reported in detail in the recently published Conceptual Design Report [1]) and proposed operating modes and summarises the proposed areas of FEL research
Design, specifications, and first beam measurements of the compact linear accelerator for research and applications front end
Progress on the commissioning of ALICE, the energy recovery linac-based light source at Daresbury Laboratory
Beam dynamics driven design of powerful energy recovery linac for experiments
Powerful ERL for experiments (PERLE) is a novel energy recovery linac (ERL) test facility [1], designed to validate choices for a 50 GeV ERL foreseen in the design of the Large Hadron Electron Collider and the Future Circular Collider and to host dedicated nuclear and particle physics experiments. Its main goal is to demonstrate the high current, continuous wave, multipass operation with superconducting cavities at 802 MHz. With very high beam power (10 MW), PERLE offers an opportunity for controllable study of every beam dynamic effect of interest in the next generation of ERLs and becomes a “stepping stone” between the present state-of-the-art 1 MW ERLs and the future 100 MW scale applications
- …