Non-contact time-resolved diffuse reflectance imaging at null source-detector separation

We report results of the proof-of-principle tests of a novel non-contact tissue imaging system. The system utilizes a quasi-null source-detector separation approach for time-domain near-infrared spectroscopy, taking advantage of an innovative state-of-the-art fast-gated single photon counting detector. Measurements on phantoms demonstrate the feasibility of the non-contact approach for the detection of optically absorbing perturbations buried up to a few centimeters beneath the surface of a tissue-like turbid medium. The measured depth sensitivity and spatial resolution of the new system are close to the values predicted by Monte Carlo simulations for the inhomogeneous medium and an ideal fast-gated detector, thus proving the feasibility of the non-contact approach for high density diffuse reflectance measurements on tissue. Potential applications of the system are also discussed. © 2011 Optical Society of America

Characterization of a time-resolved non-contact scanning diffuse optical imaging system exploiting fast-gated single-photon avalanche diode detection

We present a system for non-contact time-resolved diffuse reflectance imaging, based on small source-detector distance and high dynamic range measurements utilizing a fast-gated single-photon avalanche diode. The system is suitable for imaging of diffusive media without any contact with the sample and with a spatial resolution of about 1 cm at 1 cm depth. In order to objectively assess its performances, we adopted two standardized protocols developed for time-domain brain imagers. The related tests included the recording of the instrument response function of the setup and the responsivity of its detection system. Moreover, by using liquid turbid phantoms with absorbing inclusions, depth-dependent contrast and contrast-to-noise ratio as well as lateral spatial resolution were measured. To illustrate the potentialities of the novel approach, the characteristics of the non-contact system are discussed and compared to those of a fiber-based brain imager

Design and construction of a solid switchable phantom for diffuse optical imaging

We propose a simple and reliable solid phantom for mimicking realistic localized absorption changes within a diffusive medium. The phantom is based on a solid matrix holding a movable black inclusion embedded in a rod. Translating the rod parallel to the phantom surface, the inhomogeneity can be positioned beneath the source-detector pair (perturbed case) or far from it (unperturbed case). Examples of time-resolved transmittance measurements and time-resolved reflectance scans are shown to demonstrate the properties and the versatility of the phantom

Performance assessment of time-domain optical brain imagers, part 1: basic instrumental performance protocol

open21siAbstract.  Performance assessment of instruments devised for clinical applications is of key importance for validation and quality assurance. Two new protocols were developed and applied to facilitate the design and optimization of instruments for time-domain optical brain imaging within the European project nEUROPt. Here, we present the “Basic Instrumental Performance” protocol for direct measurement of relevant characteristics. Two tests are discussed in detail. First, the responsivity of the detection system is a measure of the overall efficiency to detect light emerging from tissue. For the related test, dedicated solid slab phantoms were developed and quantitatively spectrally characterized to provide sources of known radiance with nearly Lambertian angular characteristics. The responsivity of four time-domain optical brain imagers was found to be of the order of 0.1  m2 sr. The relevance of the responsivity measure is demonstrated by simulations of diffuse reflectance as a function of source-detector separation and optical properties. Second, the temporal instrument response function (IRF) is a critically important factor in determining the performance of time-domain systems. Measurements of the IRF for various instruments were combined with simulations to illustrate the impact of the width and shape of the IRF on contrast for a deep absorption change mimicking brain activation.H. Wabnitz; D. R. Taubert; M. Mazurenka; O. Steinkellner; A. Jelzow;R. Macdonald;D. Milej;P. Sawosz;M. Kacprzak;A. Liebert;R. Cooper;J. Hebden;A. Pifferi;A. Farina;I. Bargigia;D. Contini;M. Caffini;L. Zucchelli;L. Spinelli;R. Cubeddu;A. TorricelliH., Wabnitz; D. R., Taubert; M., Mazurenka; O., Steinkellner; A., Jelzow; R., Macdonald; D., Milej; P., Sawosz; M., Kacprzak; A., Liebert; R., Cooper; J., Hebden; Pifferi, ANTONIO GIOVANNI; Farina, Andrea; Bargigia, Ilaria; Contini, Davide; Caffini, Matteo; Zucchelli, LUCIA MARIA GRAZIA; Spinelli, Lorenzo; Cubeddu, Rinaldo; Torricelli, Alessandr

Performance assessment of time-domain optical brain imagers, part 2: nEUROPt protocol

The nEUROPt protocol is one of two new protocols developed within the European project nEUROPt to characterize the performances of time-domain systems for optical imaging of the brain. It was applied in joint measurement campaigns to compare the various instruments and to assess the impact of technical improvements. This protocol addresses the characteristic of optical brain imaging to detect, localize, and quantify absorption changes in the brain. It was implemented with two types of inhomogeneous liquid phantoms based on Intralipid and India ink with well-defined optical properties. First, small black inclusions were used to mimic localized changes of the absorption coefficient. The position of the inclusions was varied in depth and lateral direction to investigate contrast and spatial resolution. Second, two-layered liquid phantoms with variable absorption coefficients were employed to study the quantification of layer-wide changes and, in particular, to determine depth selectivity, i.e., the ratio of sensitivities for deep and superficial absorption changes. We introduce the tests of the nEUROPt protocol and present examples of results obtained with different instruments and methods of data analysis. This protocol could be a useful step toward performance tests for future standards in diffuse optical imaging

Development of a diode laser spectrometer for trace gas detection of NOâ‚‚ and IO

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

In-situ measurement of colloidal gold adsorption on functionalized silica surfaces

Evanescent wave cavity ring-down spectroscopy (EW-CRDS) has been applied to study, in situ, the deposition kinetics of commercially available gold colloids on functionalized silica surfaces from quiescent solution. Neither 5 nor 20 nm citrate-stabilized nanoparticles were observed to adsorb on clean silica surfaces. Adsorption on a poly-L-lysine-functionalized surface, however, occurs readily and irreversibly with the kinetics of adsorption differing markedly for the two particle sizes studied. 5 nm particles adsorb to form a highly disperse submonolayer of individual particles with atomic force microscope images showing no evidence of aggregation. The controlled growth of multilayer nanoparticle/polyelectrolyte films is demonstrated by alternately depositing colloidal particles and poly-L-lysine films. The deposition of multilayer nanoparticle films increases the sensitivity of the functionalized surface to changes in the solvent refractive index. The adsorption kinetics of the 20 nm colloid is more complex than that of the smaller colloid with adsorbed particles acting as nucleation sites for subsequent aggregation with the result that the interfacial absorbance continues to increase indefinitely with time