165 research outputs found
Estimates of elastic plate thicknesses beneath large volcanos on Venus
Megellan radar imaging and topography data are now available for a number of volcanos on Venus greater than 100 km in radius. These data can be examined to reveal evidence of the flexural response of the lithosphere to the volcanic load. On Earth, flexure beneath large hotspot volcanos results in an annual topographic moat that is partially to completely filled in by sedimentation and mass wasting from the volcano's flanks. On Venus, erosion and sediment deposition are considered to be negligible at the resolution of Magellan images. Thus, it may be possible to observe evidence of flexure by the ponding of recent volcanic flows in the moat. We also might expect to find topographic signals from unfilled moats surrounding large volcanos on Venus, although these signals may be partially obscured by regional topography. Also, in the absence of sedimentation, tectonic evidence of deformation around large volcanos should be evident except where buried by very young flows. We use analytic solutions in axisymmetric geometry for deflections and stresses resulting from loading of a plate overlying an inviscid fluid. Solutions for a set of disk loads are superimposed to obtain a solution for a conical volcano. The deflection of the lithosphere produces an annular depression or moat, the extent of which can be estimated by measuring the distance from the volcano's edge to the first zero crossing or to the peak of the flexural arch. Magellan altimetry data records (ARCDRs) from data cycle 1 are processed using the GMT mapping and graphics software to produce topographic contour maps of the volcanos. We then take topographic profiles that cut across the annular and ponded flows seen on the radar images. By comparing the locations of these flows to the predicted moat locations from a range of models, we estimate the elastic plate thickness that best fits the observations, together with the uncertainty in that estimate
State of stress, faulting, and eruption characteristics of large volcanoes on Mars
The formation of a large volcano loads the underlying lithospheric plate and can lead to lithospheric flexure and faulting. In turn, lithospheric stresses affect the stress field beneath and within the volcanic edifice and can influence magma transport. Modeling the interaction of these processes is crucial to an understanding of the history of eruption characteristics and tectonic deformation of large volcanoes. We develop models of time-dependent stress and deformation of the Tharsis volcanoes on Mars. A finite element code is used that simulates viscoelastic flow in the mantle and elastic plate flexural behavior. We calculate stresses and displacements due to a volcano-shaped load emplaced on an elastic plate. Models variously incorporate growth of the volcanic load with time and a detachment between volcano and lithosphere. The models illustrate the manner in which time-dependent stresses induced by lithospheric plate flexure beneath the volcanic load may affect eruption histories, and the derived stress fields can be related to tectonic features on and surrounding martian volcanoes
Aspects of modelling the tectonics of large volcanoes on the terrestrial planets
Analytic solutions for the responses of planetary lithospheres to volcanic loads have been used to model faulting and infer elastic plate thicknesses. Predictions of the distribution of faulting around volcanic loads, based on the application of Anderson's criteria for faulting to the results of the models, do not agree well with observations. Such models do not give the stress state in the load itself, but only suggest a state of horizontal compressive stress there. Further, these models have considered only the effect of an instantaneously emplaced load. They do not address the time evolution of stresses, nor do they consider the effect of a load which grows. A finite element approach allows us to assign elements to the load itself, and thus permits calculation of the stress state and stress history within the edifice. The effects of episodic load growth can also be treated. When these effects are included, models give much better agreement with observations. We use the finite element code TECTON to construct axisymmetric models of volcanoes resting on an elastic lithospheric plate overlying a viscoelastic asthenosphere. We have implemented time-dependent material properties in order to simulate incremental volcano growth. The viscoelastic layer was taken to extend to a sufficient depth so that a rigid lower boundary has no significant influence on the results. The code first calculates elastic deformations and stresses and then determines the time-dependent viscous deformations and stresses. Time in the model scales as the Maxwell time tau(m) in the asthenosphere. We consider a volcano 25 km in height and 200 km in radius on an elastic lithosphere 40 km thick (parameters approximately appropriate to Ascraeus Mons). The volcano consists of three load increments applied at intervals of 1000 tau(m). Contours of maximum deviatoric stress in the fully-grown edifice at the conclusion of flexure (t = 3000 tau(m)) are shown
Aspects of modelling the tectonics of large volcanoes on the terrestrial planets
Analytic solutions for the response of planetary lithospheres to volcanic loads have been used to model faulting and infer elastic plate thicknesses. Predictions of the distribution of faulting around volcanic loads, based on the application of Anderson's criteria for faulting to the results of the models, do not agree well with observations. Such models do not give the stress state and stress history within the edifice. The effects of episodic load growth can also be treated. When these effects are included, models give much better agreement with observations
Identifying Young Brown Dwarfs Using Gravity-Sensitive Spectral Features
We report the initial results of the Brown Dwarf Spectroscopic Survey Gravity
Project, to study gravity sensitive features as indicators of youth in brown
dwarfs. Low-resolution (R~2000) J-band and optical (R~1000) observations using
NIRSPEC and LRIS at the W.M. Keck Observatory reveal transitions of TiO, VO, K
I, Na I, Cs I, Rb I, CaH, and FeH. By comparing these features in late-type
giants and in old field dwarfs we show that they are sensitive to the gravity
(g = GM/R^2) of the object. Using low-gravity spectral signatures as age
indicators, we observed and analyzed J-band and optical spectra of two young
brown dwarfs, G 196-3B (20-300 Myr) and KPNO Tau-4 (1-2 Myr), and two possible
low mass brown dwarfs in the sigma Orionis cluster (3-7 Myr). We report the
identification of the phi bands of TiO near 1.24 microns and the A-X band of VO
near 1.18 microns together with extremely weak J-band lines of K I in
KPNO-Tau4. This is the first detection of TiO and VO in the J-band in a
sub-stellar mass object. The optical spectrum of KPNO-Tau4 exhibits weak K I
and Na I lines, weak absorption by CaH, and strong VO bands, also signatures of
a lower gravity atmosphere. G 196-3B shows absorption features in both
wavelength regions like those of KPNO-Tau4 suggesting that its age and mass are
at the lower end of published estimates. Whereas sigma Ori 51 appears to be
consistent with a young sub-stellar object, sigma Ori 47 shows signatures of
high gravity most closely resembling an old L1.5/L0, and can not be a member of
the sigma Orionis cluster.Comment: 14 pages, 4 figures. To appear in the January 10, 2004 issue of the
Astrophysical Journa
Changes in the life history of red porgy, Pagrus pagrus, from the southeastern United States, 1972-1994
Aspects of the life history of red porgy from the South Atlantic Bight (SAB) were examined for four periods (1972-74, 1979-81, 1988-90, and 1991-94), and annual changes in the age and growth of red porgy were described for data collected during
1988-94. The life history of red porgy during 1972-74 was assumed to represent
that of an unfished population. although this population had been subject to light fishing pressure. From 1972-74 to 1979-81, the back-calculated size-at-age increased slightly for ages 2-8. By 1988-90 and 1991-94. however, the back-calculated size-at-age
for the same age classes was significantly smaller than that in 1979-81. In addition, size-at-maturity and size-at-sexual-transition occurred at progressively smaller sizes for 1988-90 and 1991-94. The mean size-at-age (observed and back-calculated) declined
for most ages between 1988 and 1994. Von Bertalanffy growth curves fitted to
the mean back-calculated size-at-age for each year showed similar decreasing
trends. Changes in life history may be a response to sustained 20-year
overexploitation that has selectively removed individuals predisposed towards
rapid growth and larger size
Balloon Atrial Septostomy as Initial Therapy in Pediatric Pulmonary Hypertension
Balloon atrial septostomy is a palliative procedure currently used to bridge medically refractory pulmonary hypertension patients to lung transplantation. In the current report, we present balloon atrial septostomy as an initial therapy for high-risk pediatric pulmonary hypertension patients at our institution. Nineteen patients with median age of 4.3 years (range 0.1-14.3 years) underwent balloon atrial septostomy during initial admission for pulmonary hypertension. There were no procedural complications or deaths within 24 h of balloon atrial septostomy. Patients were followed for a median of 2.6 years (interquartile range 1.0-4.8 years). Three (16%) patients died, 3 (16%) underwent lung transplantation, and 1 (5%) underwent reverse Potts shunt. Transplant-free survival at 30 days, 1 year, and 3 years was 84%, 76%, and 67% respectively. This single-center experience suggests early-BAS in addition to pharmacotherapy is safe and warrants consideration in high-risk pediatric pulmonary hypertension patients
Discovery of a Very Young Field L Dwarf, 2MASS J01415823-4633574
While following up L dwarf candidates selected photometrically from the Two
Micron All Sky Survey, we uncovered an unusual object designated 2MASS
J01415823-4633574. Its optical spectrum exhibits very strong bands of vanadium
oxide but abnormally weak absorptions by titanium oxide, potassium, and sodium.
Morphologically such spectroscopic characteristics fall intermediate between
old, field early-L dwarfs (log(g)~5) and very late M giants (log(g)~0), leading
us to favor low gravity as the explanation for the unique spectral signatures
of this L dwarf. Such a low gravity can be explained only if this L dwarf is
much lower in mass than a typical old field L dwarf of similar temperature and
is still contracting to its final radius. These conditions imply a very young
age. Further evidence of youth is found in the near-infrared spectrum,
including a triangular-shaped H-band continuum reminiscent of young brown dwarf
candidates discovered in the Orion Nebula Cluster. Using the above information
along with comparisons to brown dwarf atmospheric and interior models, our
current best estimate is that this L dwarf has an age of 1-50 Myr and a mass of
6-25 M_Jupiter. The location of 2MASS 0141-4633 on the sky coupled with a
distance estimate of ~35 pc and the above age estimate suggests that this
object may be a brown dwarf member of either the 30-Myr-old Tucana/Horologium
Association or the ~12-Myr-old beta Pic Moving Group.Comment: Accepted for publication in the 10 March 2006 issue (volume 639) of
the Astrophysical Journa
The early thermal and magnetic state of the cratered highlands of Mars. Earth
Abstract Surface heat flows are calculated from elastic lithosphere thicknesses for the heavy cratered highlands of Mars, in terms of the fraction of the surface heat flow derived from crustal heat sources. Previous heat flow estimations for Mars used linear thermal gradients, which is equivalent to ignoring the existence of heat sources within the crust. We compute surface heat flows following a methodology that relates effective thickness and curvature of an elastic plate with the strength envelope of the lithosphere, and assuming crustal heat sources homogeneously distributed in a radioactive element-rich layer 20 or 60 km thick. The obtained results show that the surface heat flow increases with the proportion of heat sources within the crust, and with the decrease of both radioactive element-rich layer thickness and surface temperature. Also, the results permit us to calculate representative temperatures for the crust base, rock strength for the upper mantle, and lower and upper limits to the crustal magnetization depth and intensity, respectively. For Terra Cimmeria, an effective elastic thickness of 12 km implies between 30% and 80% of heat sources located within the crust. In this case the uppermost mantle would be weak at the time of loading, and temperatures in the lower crust cold enough to favor unrelaxed crustal thickness variations and to permit deep Curie depths in the highlands, as suggested by the observational evidence.
- …