10 research outputs found
Application of three-dimensional Bezier patches in grid generation
Bezier and B-spline patches are popular tools in surface modeling. With these methods, a surface is represented by the tensor product of univariate approximations. The extension of this concept to three dimensions is obvious and can be applied to the problem of grid generation. This report will demonstrate how three dimensional patches can be used in solid modeling and in the generation of grids. Examples will be given demonstrating the ability to generate three dimensional grids directly from a wire frame without having to first set up the boundary surfaces. Many geometric grid properties can be imposed by the proper choice of the control net
Transformation of two and three-dimensional regions by elliptic systems
Grid smoothing and orthogonalization procedures were developed and implemented in the construction of two and three dimensional grids. The procedures are based on the variational methods of grid generation. The two-dimensional examples were computed using the MSU IRIS Graphics Workstation. It was demonstrated that the elliptic grid generation equations, with arbitrary forcing functions, can be solved, in their variational formulation, using a gradient method. Since gradient methods have a global convergence property, the divergence problems often encountered when using SOR iterative methods can be avoided. It is not to be concluded, however, that SOR methods should be abandoned, since gradient methods tend to converge very slowly. In fact, slow convergence was the major problem encountered in the three-dimensional grids. Further progress was made on the continuing effort to develop conservative interpolation formulas for overlapping grids
Application of three-dimensional Bezier patches in grid generation
Bezier and B-spline patches are popular tools in surface modeling. With these methods, a surface is represented by the tensor product of univariate approximations. The extension of this concept to three-dimensions is obvious and can be applied to the problem of grid generation. This report will demonstrate how three-dimensional patches can be used in solid modeling and in the generation of grids. Examples will be given demonstrating the ability to generate three-dimensional grids directly from a wire frame without having to first set up the boundary surfaces. Many geometric grid properties can be imposed by the proper choice of the control net
Transformation of two and three-dimensional regions by elliptic systems
Several reports are attached to this document which contain the results of our research at the end of this contract period. Three of the reports deal with our work on generating surface grids. One is a preprint of a paper which will appear in the journal Applied Mathematics and Computation. Another is the abstract from a dissertation which has been prepared by Ahmed Khamayseh, a graduate student who has been supported by this grant for the last two years. The last report on surface grids is the extended abstract of a paper to be presented at the 14th IMACS World Congress in July. This report contains results on conformal mappings of surfaces, which are closely related to elliptic methods for surface grid generation. A preliminary report is included on new methods for dealing with block interfaces in multiblock grid systems. The development work is complete and the methods will eventually be incorporated into the National Grid Project (NGP) grid generation code. Thus, the attached report contains only a simple grid system which was used to test the algorithms to prove that the concepts are sound. These developments will greatly aid grid control when using elliptic systems and prevent unwanted grid movement. The last report is a brief summary of some timings that were obtained when the multiblock grid generation code was run on the Intel IPSC/860 hypercube. Since most of the data in a grid code is local to a particular block, only a small fraction of the total data must be passed between processors. The data is also distributed among the processors so that the total size of the grid can be increase along with the number of processors. This work is only in a preliminary stage. However, one of the ERC graduate students has taken an interest in the project and is presently extending these results as a part of his master's thesis
Multilevel elliptic smoothing of large three-dimensional grids
Elliptic grid generation methods have been used for many years to smooth and improve grids generated by algebraic interpolation schemes. However, the elliptic system that must be solved is nonlinear and convergence is generally very slow for large grids. In an attempt to make elliptic methods practical for large three-dimensional grids, a two-stage implementation is developed where the overall grid point locations are set using a coarse grid generated by the elliptic system. The coarse grid is then interpolated to generate a finer grid which is smoothed using only a few iterations of the elliptic system
SUMMARY
Elliptic grid generation methods have been used for many years to smooth and improve grids generated by algebraic interpolation schemes. However � the elliptic system that must be solved is nonlinear and convergence is generally very slow for large grids. In an attempt to make elliptic methods practical for large three�dimensional grids � a two�stage implementation is developed where the overall grid point locations are set using a coarse grid generated by the elliptic system. The coarse grid is then interpolated to generate a �ner grid which is smoothed using only a few iterations of the elliptic system
Geometric Model for a Parametric Study of the Blended-Wing-Body Airplane
A parametric model is presented for the blended-wing-body airplane, one concept being proposed for the next generation of large subsonic transports. The model is defined in terms of a small set of parameters which facilitates analysis and optimization during the conceptual design process. The model is generated from a preliminary CAD geometry. From this geometry, airfoil cross sections are cut at selected locations and fitted with analytic curves. The airfoils are then used as boundaries for surfaces defined as the solution of partial differential equations. Both the airfoil curves and the surfaces are generated with free parameters selected to give a good representation of the original geometry. The original surface is compared with the parametric model, and solutions of the Euler equations for compressible flow are computed for both geometries. The parametric model is a good approximation of the CAD model and the computed solutions are qualitatively similar. An optimal NURBS approximation is constructed and can be used by a CAD model for further refinement or modification of the original geometry
Convergence and applications of reproducing kernels for classes of discrete harmonic functions
Geometric Model for a Parametric Study of the Blended�Wing�Body Airplane �
A parametric model is presented for the blended� wing�body airplane � one concept being proposed for the next generation of large subsonic trans� ports. The model is de�ned in terms of a small set of parameters which facilitates analysis and optimization during the conceptual design process. The model is generated from a preliminary CAD geometry. From this geometry � airfoil cross sections are cut at selected locations and �tted with analytic curves. The airfoils are then used as boundaries for surfaces de�ned as the solution of partial di�erential equations. Both the airfoil curves and the surfaces are generated with free parameters selected to give a good representation of the original geometry. The original surface is compared with the parametric model � and solutions of the Euler equations for compressible �ow are computed for both geometries. The parametric model is a good approximation of the CAD model and the computed solutions are qualitatively similar. An optimal NURBS approxi� mation is constructed and can be used by a CAD model for further re�nement or modi�cation of the original geometry. � This paper is declared a work of the U. S. Government and is not subjected to copyright protection in the United States