Impending Total Airway Collapse Involving a Maxillary Removable Partial Denture: A Clinical Report

This article presents a rare incident of a bilateral maxillary removable partial denture as an airway foreign body. The removable partial denture and the surrounding soft tissue irritation caused partial obstruction of the airway. Impending airway collapse was avoided after successful removal of the foreign body. Removing a removable dental prostheses at night, not only to prevent soft tissue pathology but also to avoid ingestion or aspiration of the prosthesis, must be emphasized

Acrylic Resin Guide for Locating the Abutment Screw Access Channel of Cement-Retained Implant Prostheses

Abutment screw loosening represents a common and challenging technical complication of cement-retained implant prostheses. This article describes the fabrication of a simple and accurate poly(methyl methacrylate) guide for identifying the location and angulation of the abutment screw access channel of a cement-retained implant prosthesis with a loosened abutment screw

The Post–endodontic Adhesive Interface: Theoretical Perspectives and Potential Flaws

Introduction The aim of this review was to analyze the potential of successful bonds of endodontic posts to radicular dentin as well as the limitations of the post–endodontic adhesive interface. Methods The MEDLINE/PubMed and Web of Science electronic databases were searched. The search was augmented by a manual search of the pertinent bibliographies. Results The post–endodontic adhesive interface finds application in the endodontic cohesive units. Many techniques and materials exist to improve the bond between endodontic posts and resin-based materials as well as between resin-based materials and radicular dentin. Different techniques used for the adhesion of metallic and fiber-reinforced posts are discussed and critically analyzed. Conclusions Although adhesive cementation of endodontic posts is popular, a long-term predictable bond may be compromised because of procedures related to the endodontic treatment and/or the adhesive cementation procedures. Microleakage and degradation phenomena may further jeopardize the post–endodontic adhesive interface

Fracture Resistance of Compromised Endodontically Treated Teeth Restored with Bonded Post and Cores: An in Vitro Study

Statement of problem: It is unclear which post and core system performs best when bonded to severely compromised endodontically treated teeth. Purpose: The purpose of this study was to investigate the fracture resistance and mode of failure of severely compromised teeth restored with 3 different adhesively bonded post and core systems. Material and methods: Thirty extracted endodontically treated maxillary anterior teeth were randomly divided into 3 groups, CPC, gold cast post and core; TPC, titanium prefabricated post/composite resin core; and FPC, quartz fiber reinforced post/composite resin core. All posts were adhesively cemented. All cores resembled a central incisor preparation with no remaining tooth structure above the finish line. Cast gold crowns were fabricated and cemented adhesively. The specimens were aged with thermocycling and cyclic loading. Two specimens per group were randomly selected for micro-computed tomographic imaging before and after aging. Failure was induced with a universal testing machine. The mode of failure was characterized by the interface separation. Data were analyzed with 1-way ANOVA (α=.05) followed by post hoc tests (Bonferroni). Results: A statistically significant difference was found among the 3 groups (P=.002). CPC was significantly different than TPC (P=.008) or FPC (P=.003). The primary mode of failure for CPC and TPC was root fracture, and for FPC post debonding. Conclusions: Severely compromised endodontically treated teeth restored with bonded gold cast post and cores showed significantly higher fracture resistance

Removable Partial Dentures vs Overdentures in Children with Ectodermal Dysplasia: Two Case Reports

Ectodermal dysplasia (ED) represents a disorder group characterised by abnormal development of the ectodermal derivatives. Removable partial dentures (RPD), complete dentures (CD) or overdentures (OD) are most often the treatment of choice for young affected patients. Prosthetic intervention is of utmost importance in the management of ED patients, as it resolves problems associated with functional, aesthetic, and psychological issues, and improves a patient’s quality of life. However, few studies present the principles and guidelines that can assist in the decision-making process of the most appropriate removable prosthesis. The purpose of this study was to suggest a simple treatment decision-making algorithm for selecting an effective and individualised rehabilitative treatment plan, considering different parameters

Analysis of Flexural Strength and Contact Pressure After Simulated Chairside Adjustment of Pressed Lithium Disilicate Glass-Ceramic

Statement of problem Research evaluating load-to-failure of pressed lithium disilicate glass-ceramic (LDGC) with a clinically validated test after adjustment and repair procedures is scarce. Purpose The purpose of this in vitro study was to investigate the effect of the simulated chairside adjustment of the intaglio surface of monolithic pressed LDGC and procedures intended to repair damage. Material and methods A total of 423 IPS e.max Press (Ivoclar Vivadent AG) disks (15 mm diameter, 1 mm height) were used in the study. The material was tested by using an equibiaxial loading arrangement (n≥30/group) and a contact pressure test (n≥20/group). Specimens were assigned to 1 of 14 groups. One-half was assigned to the equibiaxial load test and the other half underwent contact pressure testing. Testing was performed in 2 parts, before glazing and after glazing. Before-glazing specimens were devested and entered in the test protocol, while after-glazing specimens were devested and glazed before entering the test protocol. Equibiaxial flexure test specimens were placed on a ring-on-ring apparatus and loaded until failure. Contact pressure specimens were cemented to epoxy resin blocks with a resin cement and loaded with a 50-mm diameter hemisphere until failure. Tests were performed on a universal testing machine with a crosshead speed of 0.5 mm/min. Weibull statistics and likelihood ratio contour plots determined intergroup differences (95% confidence bounds). Results Before glazing, the equibiaxial flexural strength test and the Weibull and likelihood ratio contour plots demonstrated a significantly higher failure strength for 1EC (188 MPa) than that of the damaged and/or repaired groups. Glazing following diamond-adjustment (1EGG) was the most beneficial post-damage procedure (176 MPa). Regarding the contact pressure test, the Weibull and likelihood ratio contour plots revealed no significant difference between the 1PC (98 MPa) and 1PGG (98 MPa) groups. Diamond-adjustment, without glazing (1EG and 1PG), resulted in the next-to-lowest equibiaxial flexure strength and the lowest contact pressure. After glazing, the strength of all the groups, when subjected to glazing following devesting, increased in comparison with corresponding groups in the before-glazing part of the study. Conclusions A glazing treatment improved the mechanical properties of diamond-adjusted IPS e.max Press disks when evaluated by equibiaxial flexure and contact pressure tests. Clinical Implications When adjustments are made on the intaglio surface of a pressed lithium disilicate glass-ceramic, a subsequent glazing treatment is recommended to improve strength

Prosthetic Rehabilitation Following Lateral Resection of the Mandible with a Long Cantilever Implant-Supported Fixed Prosthesis: A 3-Year Clinical Report

This clinical report describes the prosthetic management of the surgical reconstruction of a patient after mandibular resection. Complete oral rehabilitation was achieved with a maxillary complete denture and a mandibular implant-supported fixed prosthesis with a custom titanium framework and a long unilateral cantilever

Complete Mouth Rehabilitation and Gastroesophageal Reflux Disease: Conventional and Contemporary Treatment Approaches

This report describes the diagnosis and prosthodontic management of 2 patients with a history of chronic gastroesophageal reflux disease and worn dentition. Different treatment approaches were used for oral rehabilitation. Use of conventional and contemporary restorative materials resulted in functional and esthetic prosthodontic rehabilitation with a favorable prognosis. Gastroesophageal reflux disease (GERD) is a “condition which develops when the reflux of stomach contents causes troublesome symptoms and/or complications. Reflux episodes can be intensified by dietary habits, smoking, physical exercise, and obstructive sleep apnea.Complications of GERD are regurgitation, chest pain, esophagitis, Barrett’s esophagus, esophageal adenocarcinoma, cough, asthma, and dental erosion.GERD is associated with dental erosion and sleep bruxism,and dental erosion may be the only symptom of GERD. The purpose of this report was to present the oral diagnosis and management of 2 patients with chronic GERD who presented with tooth wear and required complete mouth rehabilitation. The restoration of dentition was achieved by following different treatment modalities

Effect of Airborne-particle Abrasion on 3-dimensional Surface Roughness and Characteristic Failure Load of Fiber-reinforced Posts

Statement of problem Debonding is the most common complication of fiber-reinforced posts (FRPs). Airborne-particle abrasion (APA) has been suggested to increase resin cement adhesion to the surface of FRPs. However, which abrasion protocol is the most favorable is unclear. Purpose The purpose of this in vitro study was to compare the surface roughness and characteristic failure load of three FRP systems following different APA protocols. Material and methods A total of 150 posts from 3 manufacturers (glass FRP, quartz FRP, and zirconia-enriched glass FRP) were randomly assigned to different surface treatments (NT: no treatment—control; E0: cleaned with 96% ethanol solution; E2: APA for 2 seconds/mm2—ethanol cleaned, E5: APA for 5 seconds/mm2—ethanol cleaned; and E10: APA for 10 seconds/mm2—ethanol cleaned) forming 15 groups in total. APA was performed with 50-μm aluminum oxide. Each post was observed under a 3-dimensional (3D) laser microscope, and average 3D surface roughness (Sa) was measured. Failure was induced with a universal testing machine. Two specimens per group were evaluated under the same microscope to evaluate failure patterns. Surface roughness data were analyzed with the Welch ANOVA (α=.05), followed by the post hoc Games-Howell test. Failure load differences were determined by 2-parameter Weibull statistics and likelihood ratio contour plots (95% confidence bounds). Results Statistically significant differences were found in the mean surface roughness among the groups (Welch ANOVA, P Conclusions APA significantly increased surface roughness in all post systems. APA effects on characteristic failure load were dependent on the material used

Retrofitting a Foundation Restoration to an Existing Ceramic Crown after Endodontic Treatment: A Dental Technique

This article describes the fabrication of a foundation restoration after endodontic treatment using a preexisting ceramic prosthesis and polytetrafluoroethylene (PTFE) tape as a barrier. This technique presents a solution if the prosthesis and marginal integrity are to be maintained