Desenvolvimento de compósitos ZnC2O4/xerogel de carbono para degradação fotocatalítica de azul de metileno sob radiação solar

O desenvolvimento de novos compósitos oxalato de zinco (ZnC2O4)/xerogel de carbono para aplicações fotocatalíticas foi avaliado. O uso do xerogel de carbono é justificado por sua alta condutividade, que facilita a separação de cargas geradas na estrutura do oxalato de zinco. A eficiência fotocatalítica dos materiais foi avaliada pela decomposição do azul de metileno. Os materiais foram produzidos pela dispersão do oxalato de zinco em gel de carbono, durante sua policondensação em meio ácido. Os difratogramas de raios-X evidenciam a existência da fase β-ZnC2O4  no compósito desenvolvido. O material apresenta significativa absorção de radiação na faixa de comprimentos de onda visível. O compósito apresentou degradação completa do azul de metileno (10 mg L-1, 0.5 L) no sistema após 3 h sob luz solar simulada, com dosagem de 50 mg L-1 de catalisador, evidenciando o potencial uso desse material em processos de tratamento de efluentes. Palavras-chave: Oxalato de Zinco. Xerogel de carbono. Fotocatálise

Termoquimica de adultos de ligantes heterociclicos com cloretos de zinco, cadmio e mercurio

Orientador : Claudio AiroldiTese (doutorado) - Universidade Estadual de Campinas, Instituto de QuimicaDoutorad

An investigation of phosphate adsorption from aqueous solution onto hydrous niobium oxide prepared by co-precipitation method

The synthetic hydrous niobium oxide has been used for phosphate removal from the aqueous solutions. The kinetic data correspond very well to the pseudo second-order equation The phosphate removal tended. to increase with a decrease of pH. The equilibrium data describe very well the Langmuir isotherm. The peak appearing at 1050 cm(-1) in IR spectra after adsorption was attributed to the bending vibration of adsorbed phosphate. The adsorption capacities are high, and increased with increasing temperature. The evaluated Delta G degrees and Delta H degrees indicate the spontaneous and endothermic nature of the reactions. The adsorptions occur with increase in entropy (Delta S positive) value suggest increase in randomness at the solid-liquid interface during the adsorption. A phosphate desorbability of approximately 60% was observed with water at pH 12, which indicated a relatively strong bonding between the adsorbed phosphate and the sorptive sites on the surface of the adsorbent. (C) 2008 Elsevier B.V. All rights reserved.FAPESP[2006/05421-0

Adsorption kinetic, thermodynamic and desorption studies of phosphate onto hydrous niobium oxide prepared by reverse microemulsion method

A type of Nb(2)O(5)center dot 3H(2)O was synthesized and its phosphate removal potential was investigated in this study. The kinetic study, adsorption isotherm, pH effect, thermodynamic study and desorption were examined in batch experiments. The kinetic process was described by a pseudo-second-order rate model very well. The phosphate adsorption tended to increase with a decrease of pH. The adsorption data fitted well to the Langmuir model with which the maximum P adsorption capacity was estimated to be 18.36 mg-Pg(-1). The peak appearing at 1050 cm(-1) in IR spectra after adsorption was attributed to the bending vibration of adsorbed phosphate. The positive values of both Delta H degrees and Delta S degrees suggest an endothermic reaction and increase in randomness at the solid-liquid interface during the adsorption. Delta G degrees values obtained were negative indicating a spontaneous adsorption process. A phosphate desorbability of approximately 68% was observed with water at pH 12, which indicated a relatively strong bonding between the adsorbed phosphate and the sorptive sites on the surface of the adsorbent. The immobilization of phosphate probably occurs by the mechanisms of ion exchange and physicochemical attraction. Due to its high adsorption capacity, this type of hydrous niobium oxide has the potential for application to control phosphorus pollution.Fundacao de Amparo a Pesquisa do Estado de Sao Paulo (FAPESP)[2006/05421-0

Synthesis of Nb(2)O(5)center dot nH(2)O nanoparticles by water-in-oil microemulsion

Hydrous niobium oxide (Nb(2)O(5)center dot nH(2)O) nanoparticles had been Successfully prepared by water-in-oil microemulsion. They were characterized by X-ray diffraction (XRD), thermal analysis (TG/DTG), Fourier transform infrared spectroscopy (FTIR), BET surface area measurement, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). The results showed that the nanoparticle was exactly Nb(2)O(5)center dot nH(2)O with spherical shape. Their BET surface area was 60 m(2) g(-1). XRD results showed that Nb(2)O(5)center dot nH(2)O nanoparticles with crystallite size in nanometer scale were formed. The crystallinity and crystallity size increased with increasing annealing temperature. TT-phase of Nb(2)O(5) was obtained when the sample is annealed at 550 degrees C. (C) 2009 Elsevier B.V. All rights reserved.FAPESP[2006/05421-0

Preparation and characterization of cellulose/hydrous niobium oxide hybrid

A composite of cellulose extracted from bagasse with Nb2O5 center dot nH(2)O in three different proportions (16.67, 37.5 and 50.0 wt%) was prepared using the co-precipitation method. The materials were characterized by X-ray diffractometry (XRD), Fourier transform infra-red spectroscopy (FTIR), thermogravimetric analysis (TG/DTG), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). TG data obtained show that the presence of inorganic material influenced slightly the stability of the hybrid material. The precipitation of 16.67 wt.% of oxide was sufficient to inhibit the combustion peaks present in the DSC curve of cellulose. This work will help find new applications for these materials. Published by Elsevier Ltd

Adsorção de chumbo, cádmio e prata em óxido de nióbio (V) hidratado preparado pelo método da precipitação em solução homogênea

This paper describes the adsorption of heavy metals ions from aqueous solution by hydrous niobium oxide. Three heavy metals were selected for this study: cadmium, lead and silver. Adsorption isotherms were well fitted by Langmuir model. Maximum adsorption capacity (Q0) for Pb2 +, Ag+ and Cd2 + was found to be 452.5, 188.68 and 8.85 mg g-1, respectively

Novel cellulose/NbOPO 4.nH 2O hybrid material from sugarcane bagasse

In recent years studies concerning the applications of lignocellulosic/ inorganic couples have resulted in the development of an interesting class of functional materials. In this work a cellulose/NbOPO 4.nH 2O hybrid using cellulose from surgacane bagasse was prepared and characterized in order to test for adsorption applications. The preparation process was conducted by carrying out metallic niobium dilution in hydrofluoric acid in the presence of nitric acid, then adding boric acid to form the complex and, finally, the cellulose sugar cane bagasse was added. Concentrated phosphoric acid was also inserted to precipitate hydrous niobium phosphate particles in the cellulose fiber. This material was characterized by X-ray diffractometry (XRD), thermogravimetry (TG/DTG), and scanning electronic microscopy (SEM) connected to an energy dispersive spectrophotometer (EDS). Results by SEM/EDS show that NbOPO 4.nH 2O was present in structure of the cellulose. During the preparation of the material, using boric acid it was observed that the formation of precipitate occurred in a shorter time than the material prepared without boric acid

PREPARATION and CHARACTERIZATION of CELLULOSE/HYDROUS NIOBIUM PHOSPHATE HYBRID

In recent years, increasing attention has been directed to the use of renewable resources, particularly of sugarcane bagasse. Considering the abundant availability of such lignocellulosic materials, relatively few attempts have been made regarding their utilization. Studies about properties and morphology, heavy metal adsorption, and membranes preparation have been conduced by this research group in order to use these materials. In this paper, cellulose fibers obtained from sugarcane bagasse were bleached and modified by hydrous niobium phosphate. Hybrids (cellulose/NbOPO(4)center dot nH(2)O) were prepared from metallic niobium dissolved in a fluoridric/nitric (10:1) mixture, to which cellulose sugarcane bagasse was added. Afterwards a concentrated orthophosphoric acid (85mL, 85% w/w) was added to precipitate hydrous niobium phosphate particles. This material was characterized by X-ray diffraction (XRD), thermogravimetry (TG/DTG), and differential scanning calorimetry (DSC) analyses, as well as scanning electronic microscopy (SEM) coupled to an energy dispersive spectrophotometer (EDS). Morphological studies of bleached cellulose revealed different sizes and arrangement of cells, showing that NbOPO(4)center dot nH(2)O was present in the cellulose structure. Thermal stability of the hybrid was observed up to approximately 200 degrees C, and the cellulose decomposed at 300 degrees C. These data will help finding new uses for these materials.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP