Removal of calcium hydroxide from Weine Type II systems using photon-induced photoacoustic streaming, passive ultrasonic, and needle irrigation: a microcomputed tomography study

Objective This study compared the effectiveness of Er:YAG laser-activated irrigation (PIPS), passive ultrasonic irrigation (PUI) with EndoUltra and standard needle irrigation (SNI) in the removal of calcium hydroxide [Ca(OH)2] from the mesial roots of Weine Type II mandibular molars. Material and Methods Thirty mandibular molars were screened by µCT for the presence of mesial roots with complex intra-canal anatomy and a common apical foramen. The teeth were enlarged to a standardized 25/.06 preparation and filled with Ca(OH)2 paste. Specimens were divided into three groups (n=10) according to the technique used for Ca(OH)2 removal: PIPS, at 15 Hz and 20 mJ using a 9 mm long, 600 µm diameter tip; PUI using a 15/.02 tip; and SNI (30 Ga. side-vented needle). Equal volumes of 8.25% NaOCl and 17% EDTA were used in all groups. µCT was used to measure the initial amount of Ca(OH)2 present and to assess the residual volume of Ca(OH)2 following each irrigation protocol. Data were analyzed using Tukey HSD and Kruskal-Wallis tests (α=5%). Results The mean volume of Ca(OH)2 before removal was significantly higher in the coronal third than in the middle and apical third (p;0.05). PIPS (median 0%; IQR: 0-0) showed significant higher Ca(OH)2 removal in the apical third than PUI (median 100%, IQR: 85-100) and SNI (median 47%; IQR: 16-72) (

Dentin permeability of the apical third in different groups of teeth

This ex vivo study evaluated dentin permeability of the root canal in the apical third of different human groups of teeth. Eighty teeth were used, 8 from each dental group: maxillary and mandibular central incisors, lateral incisors and canines, maxillary first premolars (buccal and palatal roots), mandibular first premolars, and maxillary and mandibular second premolars, totalizing 88 roots that were distributed in 11 groups. The root canals were instrumented, irrigated with 1% NaOCl and 15% EDTA. Roots were immersed in 10% copper sulfate for 30 min and then in 1% rubeanic acid alcohol solution for the same period; this chemical reaction reveals dentin permeability by the formation of copper rubeanate, which is a dark-colored compound. Semi-serial 100-µm-thick cross-sections were obtained from the apical third of the roots. Five sections of each apical third were washed, dehydrated, cleared and mounted on glass slides for examination under optical microscopy. The percentage of copper ion infiltration and the amount of tubular dentin were quantified by morphometric analysis. The penetration of copper ions in the apical third ranged from 4.60 to 16.66%. The mandibular central and lateral incisors presented the highest dentin permeability (16.66%), while the maxillary canines and mandibular second and first premolars presented the lowest dentin permeability (4.60%, 4.80% and 5.71%, respectively; p<0.001). The other teeth presented intermediate permeability. In conclusion, dye penetration into dentin tubules at the apical region is strongly dependent on the group of teeth evaluated.Este estudo ex vivo avaliou a permeabilidade da dentina do canal radicular do terço apical de diferentes grupos de dentes humanos. Foram utilizados 80 dentes, sendo 8 de cada grupo dental superior e inferior: incisivos centrais, incisivos laterais, caninos, primeiros pré-molares superiores (raízes vestibulares e palatinas), primeiros pré-molares inferiores, segundos pré-molares superiores e inferiores, totalizando 88 raízes, as quais foram distribuídas em 11 grupos. Os canais foram instrumentados, irrigados com NaOCl a 1% e EDTA a 15%. As raízes foram imersas em sulfato de cobre a 10% por 30 min e acido rubeânico a 1% pelo mesmo período. Esta reação química revela a permeabilidade da dentina por meio da formação de um complexo escurecido denominado rubeanato de cobre. Hemi-secções de 100 µm de espessura foram obtidas do terço apical da raiz. Cinco secções do terço apical foram lavadas, desidratadas, diafanizadas e montadas em lâminas para análise em microscopia óptica. A porcentagem de infiltração de íons cobre e a quantidade de dentina tubular foram quantificadas por meio de análise morfométrica. A penetração de íons cobre no terço apical da raiz variou de 4,60% a 16,66%. Os incisivos centrais e laterais apresentaram a maior permeabilidade dentinária (16,66%), e os caninos superiores e segundos e primeiros pré-molares inferiores as menores (4,60%, 4,80% e 5,71%, respectivamente; p<0,001). Os outros dentes apresentaram permeabilidade intermediaria. Conclui-se que a penetração de corante nos túbulos dentinários da região apical é extremamente dependente do grupo de dentes avaliado.Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior (CAPES

Morphologic and morphometric analysis of the root canal apical third cleaning after biomechanical preparation using 3.3% Ricinus communis detergent and 1% NaOCl as irrigating solutions

This study evaluated, by morphologic and morphometric analyses, the cleaning of apical third of root canals instrumented with nickel-titanium rotary files using different irrigating solutions. Twenty-seven single-rooted mandibular premolars were assigned to three groups (n=9), according to the irrigating solution used: Group I, distilled and deionized water; Group II, 1% NaOCl; and Group III, 3.3% Ricinus communis detergent. Biomechanical preparation was performed with Protaper Plusâ nickel-titanium files as follows: S1, SX and S2 at the cervical and middle thirds, and 25/02, 25/04, 25/06, 30/02, 30/04 and 30/06 to complete the instrumentation, operating at 1 mm from the root apex. Irrigation was done at each file change with 2 mL of irrigating solution, totalizing 20 mL for each tooth. After biomechanical preparation, the apical thirds were serially sectioned and histologically processed. The cross-sections were examined by an optical microscope (X40) connected to a computer. The images were captured and analyzed using a computer software and submitted to morphometric analysis with aid of a grid. The percentage of debris remaining at the apical third was calculated. Data were submitted to statistical analysis by ANOVA and Tukey test. The results showed no statistically significant difference (p>;0.01) between the groups irrigated with 1% NaOCl and 3.3% Ricinus communis detergent, which presented the lowest percentage of debris at the apical third, 8.49% and 10.11%, respectively. The group irrigated with distilled and deionized water had the highest percentage of debris (15.58%) and was statistically different from the other groups (pEstudou-se, por meio de análise morfológica e morfométrica, a capacidade de limpeza promovida pela instrumentação rotatória com limas Ni-Ti e irrigação com diferentes soluções. Vinte e sete pré-molares inferiores foram distribuídos em três grupos (n=9), de acordo com a solução irrigante utilizada: Grupo I, água destilada e deionizada; Grupo II, NaOCl a 1% e Grupo III, detergente derivado do óleo de mamona (Ricinus communis) a 3,3%. O preparo biomecânico foi realizado com sistema rotatório de Ni-Ti Protaper Plus, obedecendo a seguinte ordem de uso dos instrumentos: S1, SX e S2 para o terço cervical e médio, seguida do 25/02, 25/04, 25/06, 30/02, 30/04 e 35/02, completando a instrumentação todos operando 1 mm aquém do ápice. A irrigação foi realizada a cada troca de instrumento com 2 mL de solução irrigante, totalizando um volume de 20 mL para cada dente. Após o preparo biomecânico, os terços apicais dos dentes foram submetidos ao processamento histológico. Os espécimes foram analisados em microscópio óptico (40X) conectado a um computador. As imagens foram capturadas e analisadas utilizando-se softwares específicos e submetidas à análise morfométrica por meio de uma grade de integração. A porcentagem de debris presente no terço apical dos canais foi calculada. Os dados foram submetidos à análise estatística por meio de ANOVA e teste de Tukey. Os resultados do presente estudo evidenciaram que não houve diferença estatisticamente significante (p>;0,01) entre os grupos irrigados com NaOCl a 1% e detergente de mamona a 3,3%, que apresentaram menor porcentagem de debris no terço apical, 8,49% e 10,11% respectivamente. O grupo irrigado com água destilada e deionizada apresentou a maior porcentagem de debris (15,58%), sendo estatisticamente diferente (

Removal of calcium hydroxide from Weine Type II systems using photon-induced photoacoustic streaming, passive ultrasonic, and needle irrigation: a microcomputed tomography study

ABSTRACT Objective This study compared the effectiveness of Er:YAG laser-activated irrigation (PIPS), passive ultrasonic irrigation (PUI) with EndoUltra and standard needle irrigation (SNI) in the removal of calcium hydroxide [Ca(OH)2] from the mesial roots of Weine Type II mandibular molars. Material and Methods Thirty mandibular molars were screened by µCT for the presence of mesial roots with complex intra-canal anatomy and a common apical foramen. The teeth were enlarged to a standardized 25/.06 preparation and filled with Ca(OH)2 paste. Specimens were divided into three groups (n=10) according to the technique used for Ca(OH)2 removal: PIPS, at 15 Hz and 20 mJ using a 9 mm long, 600 µm diameter tip; PUI using a 15/.02 tip; and SNI (30 Ga. side-vented needle). Equal volumes of 8.25% NaOCl and 17% EDTA were used in all groups. µCT was used to measure the initial amount of Ca(OH)2 present and to assess the residual volume of Ca(OH)2 following each irrigation protocol. Data were analyzed using Tukey HSD and Kruskal-Wallis tests (α=5%). Results The mean volume of Ca(OH)2 before removal was significantly higher in the coronal third than in the middle and apical third (p0.05). PIPS (median 0%; IQR: 0-0) showed significant higher Ca(OH)2 removal in the apical third than PUI (median 100%, IQR: 85-100) and SNI (median 47%; IQR: 16-72) (p<0.001). Conclusions PIPS laser-activation was more effective for the removal of Ca(OH)2 from mesial roots of mandibular molars with Weine Type II canal configurations than PUI with EndoUltra and SNI

Removal of calcium hydroxide from Weine Type II systems using photon-induced photoacoustic streaming, passive ultrasonic, and needle irrigation: a microcomputed tomography study

ABSTRACT Objective This study compared the effectiveness of Er:YAG laser-activated irrigation (PIPS), passive ultrasonic irrigation (PUI) with EndoUltra and standard needle irrigation (SNI) in the removal of calcium hydroxide [Ca(OH)2] from the mesial roots of Weine Type II mandibular molars. Material and Methods Thirty mandibular molars were screened by µCT for the presence of mesial roots with complex intra-canal anatomy and a common apical foramen. The teeth were enlarged to a standardized 25/.06 preparation and filled with Ca(OH)2 paste. Specimens were divided into three groups (n=10) according to the technique used for Ca(OH)2 removal: PIPS, at 15 Hz and 20 mJ using a 9 mm long, 600 µm diameter tip; PUI using a 15/.02 tip; and SNI (30 Ga. side-vented needle). Equal volumes of 8.25% NaOCl and 17% EDTA were used in all groups. µCT was used to measure the initial amount of Ca(OH)2 present and to assess the residual volume of Ca(OH)2 following each irrigation protocol. Data were analyzed using Tukey HSD and Kruskal-Wallis tests (α=5%). Results The mean volume of Ca(OH)2 before removal was significantly higher in the coronal third than in the middle and apical third (p<0.001). Ca(OH)2 was similarly removed from the coronal and middle thirds with the three methods used (p>0.05). PIPS (median 0%; IQR: 0-0) showed significant higher Ca(OH)2 removal in the apical third than PUI (median 100%, IQR: 85-100) and SNI (median 47%; IQR: 16-72) (p<0.001). Conclusions PIPS laser-activation was more effective for the removal of Ca(OH)2 from mesial roots of mandibular molars with Weine Type II canal configurations than PUI with EndoUltra and SNI

Ultrastructural analysis of root canal dentine irradiated with 980-nm diode laser energy at different parameters

Objective: The purpose of this in vitro study was to investigate using the scanning electron microscope (SEM) the ultrastructural morphological changes of the radicular dentine surface after irradiation with 980-nm diode laser energy at different parameters and angles of incidence. Background Data: There have been limited reports on the effects of diode laser irradiation at 980 nm on radicular dentin morphology. Materials and Methods: Seventy-two maxillary canines were sectioned and roots were biomechanically prepared using K3 rotary instruments. The teeth were irrigated with 2 mL of distilled water between files and final irrigation was performed with 10 mL of distilled water. The teeth were then randomly divided into five groups (n = 8 each) according to their diode laser parameters: Group 1: no irradiation (control); group 2: 1.5 W/continuous wave (CW) emission (the manufacturer's parameters); group 3: 1.5 W/100 Hz; group 4: 3 W/CW; and group 5: 3 W/100 Hz. Laser energy was applied with helicoid movements (parallel to the canal walls) for 20 sec. Eight additional teeth for each group were endodontically prepared and split longitudinally and irradiation was applied perpendicularly to the root surface. Results: Statistical analysis showed no difference between the root canal thirds irradiated with the 980-nm diode laser, and similar results between the parameters 1.5 W/CW and 3 W/100 Hz (p > 0.05). Conclusion: When considering different output powers and delivery modes our results showed that changes varied from smear layer removal to dentine fusion

Ultrastructural analysis of root canal dentine irradiated with 980-nm diode laser energy at different parameters

Objective: The purpose of this in vitro study was to investigate using the scanning electron microscope (SEM) the ultrastructural morphological changes of the radicular dentine surface after irradiation with 980-nm diode laser energy at different parameters and angles of incidence. Background Data: There have been limited reports on the effects of diode laser irradiation at 980 nm on radicular dentin morphology. Materials and Methods: Seventy-two maxillary canines were sectioned and roots were biomechanically prepared using K3 rotary instruments. The teeth were irrigated with 2 mL of distilled water between files and final irrigation was performed with 10 mL of distilled water. The teeth were then randomly divided into five groups (n = 8 each) according to their diode laser parameters: Group 1: no irradiation (control); group 2: 1.5 W/continuous wave (CW) emission (the manufacturer's parameters); group 3: 1.5 W/100 Hz; group 4: 3 W/CW; and group 5: 3 W/100 Hz. Laser energy was applied with helicoid movements (parallel to the canal walls) for 20 sec. Eight additional teeth for each group were endodontically prepared and split longitudinally and irradiation was applied perpendicularly to the root surface. Results: Statistical analysis showed no difference between the root canal thirds irradiated with the 980-nm diode laser, and similar results between the parameters 1.5 W/CW and 3 W/100 Hz (p > 0.05). Conclusion: When considering different output powers and delivery modes our results showed that changes varied from smear layer removal to dentine fusion