Landau theory of compressible magnets near a quantum critical point

Landau theory is used to investigate the behaviour of a metallic magnet driven towards a quantum critical point by the application of pressure. The observed dependence of the transition temperature with pressure is used to show that the coupling of the magnetic order to the lattice diverges as the quantum critical point is approached. This means that a first order transition will occur in magnets (both ferromagnets and antiferromagnets) because of the coupling to the lattice. The Landau equations are solved numerically without further approximations. There are other mechanisms that can cause a first order transition so the significance of this work is that it will enable us to determine the extent to which any particular first order transition is driven by coupling to the lattice or if other causes are responsible.Comment: 12 pages including 5 figures, to be presented at MMM-Intermag conference and accepted for publication in Journal of Applied Physic

Theory of magnetism with temporal disorder applied to magnetically doped ZnO

A dynamic model of the asymmetric Ising glass is presented: an Ising model with antiferromagnet bonds with probabilities q arranged at random in a ferromagnetic matrix. The dynamics is introduced by changing the arrangement of the antiferromagnetic bonds after n Monte Carlo steps but keeping the same value of q and spin configuration. In the region where there is a second order transition between the ferromagnetic and paramagnetic states the dynamic behaviour follows that expected for motional narrowing and reverts to the static behaviour only for large n. There is a different dynamic behaviour where there is a first order transition between the ferromagnetic and spin glass states where it shows no effects of motional narrowing. The implications of this are discussed. This model is devised to explain the properties of doped ZnO where the magnetisation is reduced when the exchange interactions change with time.Comment: Paper was presented at MMM 2008 and is accepted for publication in J.A.

Covid-19 global pandemic, workplace spirituality and the rise of spirituality-driven organisations in the post-digital era

The study argues that workplace spirituality is an extremely important driving force for the sustainable and healthy growth of any organisation; however, infusing workplace spirituality into companies in the industrial and digital eras would be a futile effort, as industrial organisations are built on an ethos highly incongruent with spiritual principles. Therefore, in the post-digital era, spirituality-driven organisations (SDOs) will emerge, marking the beginning of a true “spiritual paradigm” for business and human society at large. The study also elaborates on the characteristics of the post-digital era and the nature of SDOs

Experimental research into the effect of some operation factors and rock properties on the rate of penetration

Purpose. The purpose of this research is to investigate the effect of weight on bit (WOB), rotary speed (RPM), and some rock properties on the rate of penetration (ROP). Methods. Four types of rock were collected from different sites in the south of Egypt (Aswan sandstone, Isawya limestone, Assiut limestone, and Minya marble). These tested samples were drilled by diamond core bit using a fixed laboratory diamond drilling machine under conditions (400 and 1200 rpm), and loads from 12 to 220 kg. WOB, ROP, torque (T) and specific energy (SE) were continuously observed during the drilling trials. The effect of these factors on ROP were examined. Water is used as a flushing and cooling medium. Findings. The effect of some operation factors on the penetration rate regarding mineral composition and different rock type was evaluated and the general equation was carried out to predict the suitable operation factor which gives the best penetration Rate. Originality. The effect of some operation factors on the penetration rate regarding mineral composition and different rock type was evaluated and the general equation was carried out to predict the suitable operation factor which gives the best penetration Rate. Practical implications. The Results demonstrated that ROP was inversely proportional to compressive strength (CS), tensile strength (TS), and density. It was also found that Aswan sandstone, Isawya limestone, Assiut limestone, and Minya marble have CS 111.94 MPa, 131.22 MPa, 125.0 MPa, and 502.5 MPa respectively. Was established that ROP was directly proportional to porosity. Increasing ROP in case of Aswan sandstone is associated with increase in porosity – 23.158%, and in case of Assiut limestone and Isawya limestone ROP is also associated with an increase in porosity – 19.9% and 17.93% respectively. Decreasing ROP in case of Minya marble is associated with decrease in porosity – 2.314%. So, we concluded that marble has lower ROP due to its higher CS, TS, and density and lower porosity than other tested rocks.Мета. Вивчення впливу комплексу основних експлуатаційних параметрів і ряду фізико-механічних властивостей порід на швидкість буріння в умовах різних родовищ Південного Єгипту. Методика. Були відібрані 4 типи порід з різних районів на півдні Єгипту (Асуанської піщаник, вапняк Ісав, Ассіутскій вапняк і мармур Міньї). Експериментальні зразки отримано на стаціонарній лабораторній буровій установці з алмазним долотом при швидкостях обертання 400 і 1200 об/хв та при навантаженнях від 12 до 220 кг. Під час експериментів постійно вимірювалися навантаження на долото, частота обертання, крутний момент на долоті й питома енергія, а також досліджувався вплив цих факторів на швидкість буріння. Як розчин для промивання і охолоджуючий агент використовувалася вода. Результати. Встановлено залежності швидкості буріння від навантаження на долото, питомої енергії та частоти обертання і питомої енергії. Виявлено, що для всіх чотирьох типів породи швидкість буріння збільшується з ростом навантаження на долото, в той час як питома енергія зменшується з ростом швидкості буріння. Розроблено ефективний спосіб прогнозування продуктивності бурової установки. Встановлено, що швидкість буріння обернено пропорційна міцності на стиск, міцності на розтягнення й щільності, а також змінюється прямо пропорційно пористості. Визначено, що менша швидкість буріння мармуру пов’язана з великими значеннями міцності на стиск, розтяг і щільність, а також з меншою пористістю у порівнянні з іншими досліджуваними породами. Наукова новизна. Встановлено нові закономірності взаємозв’язку експлуатаційних параметрів буріння з урахуванням різного типу породи (пісковик, вапняк, мармур) та її мінерального складу, а також обґрунтовано головну умову експлуатаційного фактору, який забезпечує оптимальну швидкість буріння. Практична значимість. Отримані результати дозволяють вибирати оптимальні параметри і режими буріння в процесі розвідки умов залягання родовищ Південного Єгипту, їх мінерального вмісту та стратиграфічних особливостей. Результати будуть корисними для проектних організацій, наукових інститутів з геології й розвідки, а також гірничих підприємств.Цель. Изучение влияния комплекса основных эксплуатационных параметров и ряда физико-механических свойств пород на скорость бурения в условиях пород различных месторождений Южного Египта. Методика. Были отобраны 4 типа пород из различных районов на юге Египта (Асуанский песчаник, известняк Исавии, Ассиутский известняк и мрамор Миньи). Экспериментальные образцы получены на стационарной лабораторной буровой установке с алмазным долотом при скоростях вращения 400 и 1200 об/мин и при нагрузках от 12 до 220 кг. Во время экспериментов постоянно измерялись нагрузки на долото, частота вращения, крутящий момент на долоте и удельная энергия, а также и исследовалось влияние этих факторов на скорость бурения. В качестве промывочного раствора и охлаждающего агента использовалась вода. Результаты. Установлены зависимости скорости бурения от нагрузки на долото, удельной энергии и частоты вращения и удельной энергии. Выявлено, что для всех четырех типов породы скорость бурения увеличивается с ростом нагрузки на долото, в то время как удельная энергия уменьшается с ростом скорости бурения. Разработан эффективный способ прогнозирования производительности буровой установки. Установлено, что скорость бурения обратно пропорциональна прочности на сжатие, прочности на растяжение и плотности, а также изменяется прямо пропорционально пористости. Определено, что меньшая скорости бурения мрамора связана с большими значениями прочности на сжатие, растяжение и плотности, а также с меньшей пористостью по сравнению с другими исследуемыми породами. Научная новизна. Получены новые закономерности взаимосвязи эксплуатационных параметров бурения с учетом различного типа породы (песчаник, известняк, мрамор) и ее минерального состава, а также обосновано главное условие эксплуатационного фактора, который обеспечивает оптимальную скорость бурения. Практическая значимость. Полученные результаты позволяют выбирать оптимальные параметры и режимы бурения в процессе разведки условий залегания месторождений Южного Египта, их минерального содержание и стратиграфических особенностей. Результаты будут полезными для проектных организаций, научных институтов по геологии и разведке, а также горных предприятий.Our sincere gratitude for Mining and Metallurgical Engineering Dept. Faculty of Engineering, Assiut, Egypt for invaluable assistance to upgrade and guidance to completed this article

A Potts model for the distortion transition in LaMnO3_3

The Jahn-Teller distortive transition of \lmo is described by a modified 3-state Potts model. The interactions between the three possible orbits depends both on the orbits and their relative orientation on the lattice. Values of the two exchange parameters which are chosen to give the correct low temperature phase and the correct value for the transition temperature are shown to be consistent with microscopy theory. The model predicts a first order transitions and also a value for the entropy above the transition in good agreement with experiment. The theory with the same parameters also predicts the temperature dependence of the order parameter of orbital ordering agreeing well with published experimental results. Finally, the type of the transition is shown to be close to one of the most disordered phases of the generalised Potts model. The short range order found experimentally above the transition is investigated by this model.Comment: 16 pages, 7 figures and no tables. Re-submitted to Phys. Rev.

Preparation and Characterization of Silver and Gold Nanoparticles and Study Influence on Physical Properties of PVA/PVP nanocomposites

Gold nanoparticles (Au NPs) and Silver nanoparticles (Ag NPs) ware prepared by green synthesis extraction using the Chenopodium murale leaf extract, the obtained (Ag NPs and Au NPs) were investigated by UV/Vis. absorption spectroscopy, transmission electron microscopy, Zetasizer, XRD. The plant extraction leads to produce nanoparticles of spherical shape with size range from 4 to 22 nm. Polyvinyl alcohol (PVA) and polyvinyl Pyrolidone (PVP) blend with mixed silver and gold nanoparticles were prepared by casting method. Amorphous feather of doping polymers blend was characterized by X-ray diffraction. Significant changes within the polymer matrix were monitored from infrared spectroscopy which indicates the interaction between polymer blend and mixed nanoparticles. Both indirect and direct optical energy gaps are calculated and discussed

A Study of Adiponectin in Children with Diabetes Mellitus

Objectives: Adiponectin is a hormone produced by adipose tissue. It is secreted exclusively by adipocytes and appears to play a role in the pathophysiology of obesity, diabetes mellitus (DM), and its comorbidities. The aim of this study was to assess adiponectin levels in diabetic children with type 1 DM (T1DM) and type 2 DM (T2DM), and to detect its prognostic role in them. Methods: This study was undertaken from April to July 2011 at Minia University Children’s Hospital, Egypt, and included 314 children aged 2–18 years divided into two patient groups. Group I consisted of 164 pre-diagnosed diabetic patients, further subdivided into Group Ia which included 142 patients with T1DM and Group Ib, 22 patients with T2DM; Group 2 included 150 apparently healthy children as a controls; they were age- and sex-matched to the diseased group. Patients were subjected to a thorough history taking, clinical examination, and laboratory investigations including assessment of HbA1c percentages, fasting C-peptide levels, lipid profiles and fasting serum adiponectin levels. Results: Adiponectin levels did not differ significantly between patients with T1DM and T2DM, but it was significantly higher in diabetic patients than in the controls. In T1DM, adiponectin had positive significant correlations with the duration of the disease and waist circumference, while in T2DM, it had a positive significant correlation with the dose of insulin given and negative significant associations with diastolic blood pressure, cholesterol, and C-peptide levels. Conclusion: The results of the study suggest that adiponectin can play a protective role against the metabolic complications of DM

Influence of Annealing Temperature on Structural, Electrical, and Magnetic Properties of Nd0.7Ca0.3MnO3

In this paper, we investigated the effect of annealing temperature on the electrical and magnetic properties of polycrystalline Nd0.7Ca0.3MnO3 synthesized using the well-known solid-state reaction technique. After the formation of the required Perovskite crystal structure phase, another annealing treatment has been done. The selected annealing temperatures are 700, 800, and 900°C for 12 hours. Structural refinement of the X-ray diffraction patterns showed the formation of a single orthorhombic crystal structure phase the of P b n m space group in Nd0.7Ca0.3MnO3 without any impurity peaks. From magneto-resistance measurements, we found that NCMO samples have high-colossal magnetoresistance (CMR). Moreover, the under-investigated NCMO samples showed a high power factor. The resistivity data in the insulating region (T \u3eTMI) were analyzed by considering, the Mott-variable range hopping model. The phase transition temperature showed dependence on the grain size, where Curie temperature (TC) increases with an increase in the grain size