Root canal treatment with high-frequency waves in rats

The purpose of this study was to develop a high-frequency wave therapy model in rats and to investigate the influence of high-frequency waves on root canal treatment, which may provide a novel strategy for treating apical periodontitis. Root canal treatments with and without high-frequency wave irradiation were performed on the mandibular first molars of 10-week-old male Wistar rats. The mesial roots were evaluated radiologically, bacteriologically, and immunohistochemically. At 3 weeks after root canal treatment, lesion volume had decreased significantly more in the irradiated group than in the non-irradiated group, indicating successful development of the high-frequency therapy model. The use of high-frequency waves provided no additional bactericidal effect after root canal treatment. However, high-frequency wave irradiation was found to promote healing of periapical lesions on the host side through increased expression of fibroblast growth factor 2 and transforming growth factor-β1 and could therefore be useful as an adjuvant nonsurgical treatment for apical periodontitis

Doxycycline release and antibacterial activity from PMMA/PEO electrospun fiber mats

Objective: To investigate the use of polymethyl methacrylate (PMMA) electrospun fiber mats containing different amounts of polyethylene oxide (PEO) as a doxycycline delivery system and to test antibacterial activity against an oral pathogen. Methodology: PMMA powders or PEO (mol wt 200 Kd) (10,20,30% w/w/) were dissolved in N, N-dimethylformamide (DMF) to obtain a final polymer concentration of 15% in DMF (w/v). 2% Doxycycline monohydrate was added to the solutions and submitted to vortex mixing. The solution was transferred to a plastic syringe and fit into a nanofiber electrospinning unit. The parameters applied were: voltage at 17.2 kV; distance of 20 cm between the needle tip and the collector plate; target speed at 2 m/min; and transverse speed at 1cm/min. Syringe pump speed was 0.15 mm/min. The drug release analysis was performed by removing aliquots of the drug-containing solution (in PBS) at specific periods. Doxycycline release was quantified using RP-HPLC. Fiber mats from all groups had their antibacterial action tested against <i>S. mutans</i> based on inhibition halos formed around the specimens. The experiments were performed in triplicate. Gravimetric analysis at specific periods was performed to determine any polymer loss. Morphological characterization of the electrospun fibers was completed under an optical microscope followed by SEM analysis. Results: The addition of PEO to the PMMA fibers did not affect the appearance and diameter of fibers. However, increasing the %PEO caused higher doxycycline release in the first 24 h. Fibers containing 30% PEO showed statistically significant higher release when compared with the other groups. Doxycycline released from the fibers containing 20% or 30% of PEO showed effective against <i>S. mutans</i>. Conclusion: The incorporation of PEO at 20% and 30% into PMMA fiber mat resulted in effective drug release systems, with detected antibacterial activity against <i>S. mutans</i>

Assessment of the functional efficacy of root canal treatment with high-frequency waves in rats

The purpose of this study was to develop a high-frequency wave therapy model in rats and to investigate the influence of high-frequency waves on root canal treatment, which may provide a novel strategy for treating apical periodontitis. Root canal treatments with and without high-frequency wave irradiation were performed on the mandibular first molars of 10-week-old male Wistar rats. The mesial roots were evaluated radiologically, bacteriologically, and immunohistochemically. At 3 weeks after root canal treatment, lesion volume had decreased significantly more in the irradiated group than in the non-irradiated group, indicating successful development of the high-frequency therapy model. The use of high-frequency waves provided no additional bactericidal effect after root canal treatment. However, high-frequency wave irradiation was found to promote healing of periapical lesions on the host side through increased expression of fibroblast growth factor 2 and transforming growth factor-β1 and could therefore be useful as an adjuvant nonsurgical treatment for apical periodontitis.Assessment of the functional efficacy of root canal treatment with high-frequency waves in rats. Saori Matsui, et al. PLOS ONE. 2020.9(29) doi.org/10.1371/journal.pone.023966

The sinR ortholog PGN_0088 encodes a transcriptional regulator that inhibits polysaccharide synthesis in Porphyromonas gingivalis ATCC 33277 biofilms.

Biofilm-forming cells are distinct from well characterized planktonic cells and aggregate in the extracellular matrix, the so-called extracellular polymeric substances (EPS). The sinR gene of Bacillus subtilis encodes a transcriptional regulator that is known to be involved in the biosynthesis of EPS in biofilms. Porphyromonas gingivalis inhabits the subgingival and extraradicular biofilm of humans and is one of the primary pathogens that cause progressive marginal and refractory apical periodontitis. Furthermore, P. gingivalis possesses PGN_0088, which encodes a putative ortholog of B. subtilis sinR. Here, we investigated the role of PGN_0088 (sinR) on biofilm formation. P. gingivalis strains formed biofilms on saliva-coated glass surfaces in phosphate buffered saline. Quantitative analysis indicated that the biofilm of the sinR null mutant consisted of dense exopolysaccharide. Microscopic observations showed that the increased levels of exopolysaccharide produced by the sinR mutant changed the morphology of the EPS to a mesh-liked structure. Furthermore, physical analyses suggested that the enrichment of exopolysaccharide in the EPS enhanced the resistance of the biofilm to hydrodynamic shear force. The results presented here demonstrate sinR plays important roles in the ability of P. gingivalis strain ATCC 33277 to act as a negative mediator of exopolysaccharide accumulation and is indirectly associated with the structure of the EPS and the force of its adhesion to surfaces

Measurement of air-, bone-and teeth-conducted threshold levels by pure tone audiometry

International audienceWhen we eat some food, and when we have our teeth drilled during dental treatment, we hear the sounds transmitted in three different ways. One is air-conducted sound. The second is bone-conducted sound. The third is the sound transmitted via our teeth. We define the third sound as “tooth conductedsound.” For the bone conducted auditory test, the vibrator for bone conduction is brought into contact with the mastoid behind of the ear. In this study, we measured the pure tone threshold levels of air conduction, bone conduction via mastoid and tooth conduction using an audiometer. Characterizing the sound of the tooth conduction may help to understand the discomfort of the tooth drilling sound and the satisfaction when eating food. We will report the difference of them among air conduction, bone conduction, and teeth conduction and discuss the characteristics of tooth conduction soun

Morphological Analyses of Effects of Endodontic Irrigant Solutions Using a Root Canal Model and an Immersion Model

Objective. This study aimed to compare an experimental model simulating clinical root canal irrigation (root canal model) with a conventional experimental model immersing dentin sample to irrigants (immersion model) to evaluate removal of the smear layer and decalcification of the root canal dentin using sodium hypochlorite (NaOCl) and two different concentrations of ethylenediaminetetraacetic acid (EDTA) solution. Materials and Methods. Forty-five single-rooted extracted human teeth were prepared using a Ni–Ti rotary file. EDTA, NaOCl, and citric acid were used in the root canal models and the immersion models. After the irrigation protocol, root canal surfaces were observed under scanning electron microscopy. Residual smear and decalcification of the root canal dentin were evaluated objectively by measuring the percentage of the area occupied by visible dentin tubules, the number of visible dentin tubules, and the mean area of a visible single dentin tubule. Results. Root canal and immersion models with the same irrigation protocol showed significantly different results for smear residues and decalcification of root canal dentin. In the root canal model, neither different EDTA concentrations nor the order of EDTA and NaOCl applications significantly impacted smear residues or decalcification of root canal dentin. Furthermore, no erosion of the root canal dentin surface was observed in any experimental groups in the root canal model using EDTA and NaOCl compared to intact dentin. Conclusions. Experimental design affected results for residual smear layer and decalcification of root canal dentin. The order of EDTA and NaOCl use and the concentration of EDTA did not affect results. EDTA and NaOCl irrigation did not cause erosion in the root canal model in this study

Assessment of the functional efficacy of root canal treatment with high-frequency waves in rats.

The purpose of this study was to develop a high-frequency wave therapy model in rats and to investigate the influence of high-frequency waves on root canal treatment, which may provide a novel strategy for treating apical periodontitis. Root canal treatments with and without high-frequency wave irradiation were performed on the mandibular first molars of 10-week-old male Wistar rats. The mesial roots were evaluated radiologically, bacteriologically, and immunohistochemically. At 3 weeks after root canal treatment, lesion volume had decreased significantly more in the irradiated group than in the non-irradiated group, indicating successful development of the high-frequency therapy model. The use of high-frequency waves provided no additional bactericidal effect after root canal treatment. However, high-frequency wave irradiation was found to promote healing of periapical lesions on the host side through increased expression of fibroblast growth factor 2 and transforming growth factor-β1 and could therefore be useful as an adjuvant nonsurgical treatment for apical periodontitis

Strength of biofilms formed by <i>P. gingivalis</i> strains.

<p>Standardized cultures of <i>P. gingivalis</i> were inoculated into dGAM in saliva-coated 12-well polystyrene plate and incubated statically at 37°C for 60 h, and the resulting biofilms were sonicated for 1 s. Immediately after sonication, supernatants containing floating cells were removed by aspiration and the biofilm remnants were gently washed with PBS. <i>P. gingivalis</i> genomic DNA was isolated from the biofilms, and the numbers of <i>P. gingivalis</i> cells were determined using real-time PCR. Relative amounts of bacterial cell numbers were calculated based on the number of wild type cells without sonication and assigned a value of 1.0. The percentages shown indicate the amount of remaining biofilm after sonic disruption. Duplicate experiments were independently repeated three times with each strain. Standard error bars are shown. Statistical analysis was performed using Welch's <i>t</i> test. *<i>P</i><0.001 in comparison with the wild type strain.</p

Chlorhexidine-Containing Electrospun Polymeric Nanofibers for Dental Applications: An In Vitro Study

Chlorhexidine is the most commonly used anti-infective drug in dentistry. To treat infected void areas, a drug-loaded material that swells to fill the void and releases the drug slowly is needed. This study investigated the encapsulation and release of chlorhexidine from cellulose acetate nanofibers for use as an antibacterial treatment for dental bacterial infections by oral bacteria Streptococcus mutans and Enterococcus faecalis. This study used a commercial electrospinning machine to finely control the manufacture of thin, flexible, chlorhexidine-loaded cellulose acetate nanofiber mats with very-small-diameter fibers (measured using SEM). Water absorption was measured gravimetrically, drug release was analyzed by absorbance at 254 nm, and antibiotic effects were measured by halo analysis in agar. Slow electrospinning at lower voltage (14 kV), short target distance (14 cm), slow traverse and rotation, and syringe injection speeds with controlled humidity and temperature allowed for the manufacture of strong, thin films with evenly cross-meshed, uniform low-diameter nanofibers (640 nm) that were flexible and absorbed over 600% in water. Chlorhexidine was encapsulated efficiently and released in a controlled manner. All formulations killed both bacteria and may be used to fill infected voids by swelling for intimate contact with surfaces and hold the drug in the swollen matrix for effective bacterial killing in dental settings.Applied Science, Faculty ofDentistry, Faculty ofPharmaceutical Sciences, Faculty ofNon UBCOral Biological and Medical Sciences (OBMS), Department ofOral Health Sciences (OHS), Department ofReviewedFacult