7,357 research outputs found
Synthesis of bio-based thermoplastic polyurethane elastomers containing isosorbide and polycarbonate diol and their biocompatible properties.
A new family of highly elastic polyurethanes (PUs) partially based on renewable isosorbide were prepared by reacting hexamethylene diisocyanate with a various ratios of isosorbide and polycarbonate diol 2000 (PCD) via a one-step bulk condensation polymerization without catalyst. The influence of the isorsorbide/PCD ratio on the properties of the PU was evaluated. The successful synthesis of the PUs was confirmed by Fourier transform-infrared spectroscopy and (1)H nuclear magnetic resonance. The resulting PUs showed high number-average molecular weights ranging from 56,320 to 126,000 g mol(-1) and tunable Tg values from -34 to -38℃. The thermal properties were determined by differential scanning calorimetry and thermogravimetric analysis. The PU films were flexible with breaking strains from 955% to 1795% at from 13.5 to 54.2 MPa tensile stress. All the PUs had 0.9-2.8% weight lost over 4 weeks and continual slow weight loss of 1.1-3.6% was observed within 8 weeks. Although the cells showed a slight lower rate of proliferation than that of the tissue culture polystyrene as a control, the PU films were considered to be cytocompatible and nontoxic. These thermoplastic PUs were soft, flexible and biocompatible polymers, which open up a range of opportunities for soft tissue augmentation and regeneration
Synthesis of highly elastic biocompatible polyurethanes based on bio-based isosorbide and poly(tetramethylene glycol) and their properties.
Bio-based high elastic polyurethanes were prepared from hexamethylene diisocyanate and various ratios of isosorbide to poly(tetramethylene glycol) as a diol by a simple one-shot bulk polymerization without a catalyst. Successful synthesis of the polyurethanes was confirmed by Fourier transform-infrared spectroscopy and (1)H nuclear magnetic resonance. Thermal properties were determined by differential scanning calorimetry and thermogravimetric analysis. The glass transition temperature was -47.8℃. The test results showed that the poly(tetramethylene glycol)/isosorbide-based elastomer exhibited not only excellent stress-strain properties but also superior resilience to the existing polyether-based polyurethane elastomers. The static and dynamic properties of the polyether/isosorbide-based thermoplastic elastomer were more suitable for dynamic applications. Moreover, such rigid diols impart biocompatible and bioactive properties to thermoplastic polyurethane elastomers. Degradation tests performed at 37℃ in phosphate buffer solution showed a mass loss of 4-9% after 8 weeks, except for the polyurethane with the lowest isosorbide content, which showed an initial rapid weight loss. These polyurethanes offer significant promise due to soft, flexible and biocompatible properties for soft tissue augmentation and regeneration
Synthesis, characterization, and biocompatible properties of alanine-grafted chitosan copolymers
In order to overcome major problems regarding the lack of affinity to solvents and limited reactivity of the free amines of chitosan, introduction of appropriate spacer arms having terminal amine function is considered of interest. L-Alanine-N-carboxyanhydride was grafted onto chitosan via anionic ring-opening polymerization. The chemical and structural characterizations of L-alanine-grafted chitosan (Ala-g-Cts) were confirmed through Fourier transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy ((1)H NMR). In addition, the viscoelastic properties of Ala-g-Cts were examined by means of a rotational viscometer, and thermal analysis was carried out with a thermogravimetric analyzer and differential scanning calorimetry. Morphological changes in the chitosan L-alanine moiety were determined by x-ray diffraction. To determine the feasibility of using these films as biomedical materials, we investigated the effects of their L-alanine content on physical and mechanical properties. The biodegradation results of crosslinked Ala-g-Cts films were evaluated in phosphate-buffered solution containing lysozyme at 37℃. Proliferation of MC3T3-E1 cells on crosslinked Ala-g-Cts films was also investigated with use of the CCK-8 assay
An Illumination Identification System for the AIBO Robot
The Four Legged League is a division of the RoboCup initiative that uses Sony AIBOTM robots to further robotics research. Most participants implement vision systems that use the color of objects to perform identification. Calibration of the color classification system must be done and any changes to the lighting of the environment after calibration reduces the accuracy of the system, often to a point at which the robot is effectively blind. This study investigates the relationships in the color data of image pixels between lighting conditions in an effort to identify trends that can be used as the basis of a rule-based system. The aim of the system is to identify the current lighting level as one of a set of known conditions. The proposed systems uses the color data of image pixels and information about the AIBO’s location and orientation to identify lighting levels, allowing a vision system to switch to an appropriate pre-configured calibratio
Stabilization of crossflow instability with plasma actuators: linearized navier stokes simulations
This paper describes work carried out within the European Union (EU)-Russia Buterfli project to look at the control of transition-causing “target” stationary cross flow vortices, by the use of distributed plasma actuation to generate sub-dominant “killer” modes. The objective is to use the “killer” modes to control the “target” modes through a non-linear stabilizing mechanism. The numerical modelling and results are compared to experimental studies performed at the TsAGI T124 tunnel for a swept plate subject to a favorable pressure gradient flow. A mathematical model for the actuator developed at TsAGI was implemented in a linearized Navier Stokes (LNS) solver and used to model and hence predict “killer” mode amplitudes at a measurement plane in the experiment. The LNS analysis shows good agreement with experiment, and the results are used as input for non-linear PSE analysis to predict the effect of these modes on crossflow transition. Whilst the numerical model indicates a delay in transition, experimental results indicated an advance in transition rather than delay. This was determined to be due to actuator induced unsteadiness arising in the experiment, resulting in the generation of travelling crossflow disturbances which tended to obscure and thus dominate the plasma stabilized stationary disturbances
Using Media Literacy to Counter Stereotypical Images of Blacks and Latinos at a Predominantly White University
Media literacy, the critical analysis and deconstruction of media messages, has the potential to promote favorable attitudes toward members of racial minority groups. This study reports on the development and implementation of two types of media literacy interventions (i.e., critical and stereotype) aimed at enhancing college students' attitudes toward Blacks and Latinos. Students from 5 sections of the same course took part in a quasi-experiment and were randomly assigned to 1 of the 2 interventions or to a control group. Students' attitudes were measured at 3 different times during the study: 6 weeks before the intervention, immediately following the intervention, and 6 weeks after the intervention. Both interventions enhanced students' attitudes toward Blacks and Latinos but the stereotype intervention was more effective than the critical one, both for short- and long-term effects, as the latter disappeared in the critical condition. Attitudes of students in the control group remained the same throughout the study. Implications address how to use media literacy to enhance conversation about race relations
A Reaction Between High Mn-High Al Steel and CaO-SiO2-Type Molten Mold Flux: Part I. Composition Evolution in Molten Mold Flux
In order to elucidate the reaction mechanism between high Mn-high Al steel such as twin-induced plasticity steel and molten mold flux composed mainly of CaO-SiO2 during continuous casting process, a series of laboratory-scale experiments were carried out in the present study. Molten steel and molten flux were brought to react in a refractory crucible in a temperature range between 1713 K to 1823 K (1440 A degrees C to 1550 A degrees C) and composition evolution in the steel and the flux was analyzed using inductively coupled plasma atomic emission spectroscopy, X-ray fluorescence, and electron probe microanalysis. The amount of SiO2 in the flux was significantly reduced by Al in the steelthus, Al2O3 was accumulated in the flux as a result of a chemical reaction, 4[Al] + 3(SiO2) = 3[Si] + 2(Al2O3). In order to find a major factor which governs the reaction, a number of factors ((pct CaO/pct SiO2), (pct Al2O3), [pct Al], [pct Si], and temperature) were varied in the experiments. It was found that the above chemical reaction was mostly governed by [pct Al] in the molten steel. Temperature had a mild effect on the reaction. On the other hand, (pct CaO/pct SiO2), (pct Al2O3), and [pct Si] did not show any noticeable effect on the reaction. Apart from the above reaction, the following reactions are also thought to happen simultaneously: 2[Mn] + (SiO2) = [Si] + 2(MnO) and 2[Fe] + (SiO2) = [Si] + 2(FeO). These oxide components were subsequently reduced by Al in the molten steel. Na2O in the molten flux was gradually decreased and the decrease was accelerated by increasing [pct Al] and temperature. Possible reactions affecting the Al2O3 accumulation are summarized.ope
Revitalisation endodontic treatment of traumatised immature teeth: a prospective long-term clinical study
Purpose
Continuation of root development following revitalisation endodontics (RET) has been shown to be unpredictable with lower success rates in traumatised teeth. This study reports the outcomes for RET in traumatised teeth over a review period of 4 years.
Methods
A prospective uncontrolled study, where RET was performed on traumatised upper immature anterior teeth with necrotic pulps in 15 children (mean age = 8.3 years), was conducted. Patients were reviewed at 3, 9, 12, 24, and 48 months, where clinical and radiographic assessments were performed. At the last review appointment, patients and parents answered questions assessing their perception and acceptance of tooth colour change over time. McNemar’s Exact test and linear mixed model assessment were used to assess changes in pulpal electrical response and radiographic evidence of continuation of root development over time, respectively.
Results
There was 83.3% healing with no significant changes in EPT responses, and no significant changes in root lengths, while significant changes in root widths (p < 0.05) and root apex widths (p < 0.001) were found over time. Twenty-five percent of patients and 33% of parents felt that there were changes in tooth colour following RET over time.
Conclusion
Within the limitations of this study, traumatised teeth treated using RET showed no significant root lengthening, however, acceptable periapical healing, slow thickening of root dentinal walls, and rapid development of apical closure were evident over a period of 43 months. Using Portland cement and omitting minocycline, did not eliminate crown colour change following RET
Anti-Neuroinflammatory Effects of Houttuynia cordata Extract on LPS-Stimulated BV-2 Microglia
Purpose: To evaluate the anti-neuroinflammatory effects of Houttuynia cordata extract (H. cordata) in lipopolysaccharide (LPS)-stimulated BV-2 microglial cells, and its anti-oxidant properties.Methods: Anti-oxidant properties were evaluated by 1, 1-diphenyl-2-picryl-hydrazyl (DPPH) radical scavenging assay. Cell viability was assessed by 3-(4, 5-dimethylthiazol-2-yl)-2, 5- diphenyl-tetrazolium bromide (MTT) assay. LPS was used to stimulate BV-2 cells. Nitric oxide (NO) levels were measured using Griess assay. Inducible NO synthase (iNOS) expression, interleukin (IL)-6 expressional level were determined by enzyme-linked immunosorbent assay (ELISA) and Western blot analysis.Results: Ethyl actetae (HC-EA) extract of H. cordata significantly scavenged DPPH free radicals in a concentration-dependent fashion. The increased levels of NO, iNOS and IL-6 in LPS-stimulated BV-2 microglial cells were also suppressed by HC-EA extract in a concentration-dependent manner.Conclusion:The result indicate that the HC-EA extract exhibited strong anti-oxidant properties and inhibited the excessive production of pro-inflammatory mediators, including NO, iNOS and IL-6, in LPSstimulated BV-2 cells. The anti-oxidant phenolic compounds present in HC-EA extract might play an important role in ameliorating neuroinflammatory processes in LPS-stimulated BV-2 microglial cells.Keywords: Houttuynia cordata, DPPH radicals, antioxidant, neuroinflammation, BV-2 cells, iNOS, COX-2, IL-6
- …