5,445 research outputs found
EXISTING-BIM: INTEGRATED SURVEY PROCEDURES FOR THE MANAGEMENT OF MODERN ARCHITECTURE
Abstract. This paper is aimed at illustrating the operation workflow to create a BIM model of an existing building, by highlighting its process starting from photogrammetric acquisitions and indicating its critical elements as regards data structure and the following modeling. The subject of this study is a reinforced concrete building of the 1960s on six levels. At present, it is undergoing an extensive refurbishment with the purpose of converting its original function, from the US Navy Hospital into offices. Since it was possible to access archive documents concerning the executive design and to carry out even invasive surveys for acquiring specific data about building details, BIM modeling could refer to a significant amount of qualitative and quantitative data. This circumstance characterized the work steps of a BIM modeling which, although referred to an existing building, may also be applied to new constructions. Building technology has implicitly facilitated the identification of the constructive elements and the creation of a list, although the unusual shape of the structure has caused specific problems differently discussed and documented in the text.</p
Aortomesenteric fat thickness with ultrasound predicts metabolic diseases in obese patients
BACKGROUND:: The relation between visceral fat accumulation and development of cardiovascular and metabolic disorders has been demonstrated. The aim of this study was to determine the relationship between a new ultrasound visceral fat thickness (VFT) measurement and clinical and anthropometric data in a consecutive series of obese patients. METHODS:: Fifty-five consecutive male obese patients underwent ultrasound evaluation and metabolic and anthropometric parameters determination at baseline and after 3 weeks of a very low-calorie diet (VLCD) therapy. The new ultrasound measurement, the thickness of the fat between the aorta and the superior mesenteric artery (AMFT), was determined along with the maximum thickness of preperitoneal fat and the global VFT. RESULTS:: AMFT showed a better correlation than VFT and preperitoneal fat with all anthropometric and metabolic parameters, both at baseline and after VLCD regimen. At baseline, patients in the middle and high AMFT and VFT tertiles had a significantly higher prevalence of metabolic diseases with respect to AMFT and VFT low tertile patients, whereas after VLCD period, AMFT only showed significant difference within tertiles. The odds ratios for the various metabolic diseases were higher in the middle and high AMFT tertiles than those in the middle and high VFT tertiles, remaining significant after adjustment for age, body mass index and VLCD regimen only in the middle and high AMFT tertiles. CONCLUSIONS:: The ultrasonographic AMFT evaluation is strongly correlated to the presence of metabolic syndrome and could be a valuable tool to predict metabolic diseases and associated cardiovascular risks in men. © 2013 Lippincott Williams and Wilkins
Non-dynamic origin of the acoustic attenuation at high frequency in glasses
The sound attenuation in the THz region is studied down to T=16 K in glassy
glycerol by inelastic x-ray scattering. At striking variance with the decrease
found below 100 K in the GHz data, the attenuation in the THz range does not
show any T dependence. This result i) indicates the presence of two different
attenuation mechanisms, active respectively in the high and low frequency
limits; ii) demonstrates the non-dynamic origin of the attenuation of THz sound
waves, and confirms a similar conclusion obtained in SiO2 glass by molecular
dynamics; and iii) supports the low frequency attenuation mechanism proposed by
Fabian and Allen (Phys.Rev.Lett. 82, 1478 (1999)).Comment: 3 pages, 5 Figures, To be published in PR
Complicated acute type B aortic dissection involving the arch: Treatment by simultaneous hybrid approach under local anesthesia
Endovascular treatment of right-sided subclavian artery aneurysm in a congenitally malformed aortic arch
Endovascular Stent Grafts as a Safe Secondary Option for Paraanastomotic Abdominal Aortic Aneurysm
ObjectiveTo describe our experience of endovascular repair of paraanastomotic aortic aneurysm.Methods and resultsFrom March 2001 to December 2004 we identified 6 patients with a paraanastomotic aortic aneurysms following previous open repair of abdominal aortic aneurysm. All patients were treated with endovascular surgery under epidural anaesthesia. There were no major complications, surgical conversions or deaths. Four patients received a bifurcated aortic stent-graft, and two an aorto-uniliac stent-graft followed by a femoro-femoral bypass. At follow-up (mean 26.1±10.2 months) there were no deaths, endoleaks or graft migrations observed.ConclusionEndovascular surgery, avoiding general anesthesia and re-laparotomy, is the ideal technique for treatment of this complication resulting from failed primary conventional AAA repair
Endovascular Stent Grafts as a Safe Secondary Option for Paraanastomotic Abdominal Aortic Aneurysm
Objective: To describe our experience of endovascular repair of paraanastomotic aortic aneurysm. Methods and results: From March 2001 to December 2004 we identified 6 patients with a paraanastomotic aortic aneurysms following previous open repair of abdominal aortic aneurysm. All patients were treated with endovascular surgery under epidural anaesthesia. There were no major complications, surgical conversions or deaths. Four patients received a bifurcated aortic stent-graft, and two an aorto-uniliac stent-graft followed by a femoro-femoral bypass. At follow-up (mean 26.1 ± 10.2 months) there were no deaths, endoleaks or graft migrations observed. Conclusion: Endovascular surgery, avoiding general anesthesia and re-laparotomy, is the ideal technique for treatment of this complication resulting from failed primary conventional AAA repair. © 2006 Elsevier Ltd. All rights reserved
Effect of Toothpaste on the Surface Roughness of the Resin-Contained CAD/CAM Dental Materials: A Systematic Review
Background: The purpose of this review is to describe the possible effect of toothbrushing on surface roughness of resin-contained CAD/CAM materials. Methods: Systematic literature search for articles published in peer-reviewed journals between January 2000 and February 2020 has been conducted, which evaluated the effect of brushing on surface roughness of resin-contained CAD/CAM dental materials. The research was conducted in Scopus, PubMed/Medline, Web of Science, Embase, and Science Direct using a combination of the following MeSH/Emtree terms: “brushing”, “resin-based”, “dental”, “CAD/CAM”, and “surface roughness”. Results: A total of 249 articles were found in the search during initial screening. Fifty-five articles were selected for the full-text evaluation after the steps of reading of abstract/title and remotion of duplicate. Only six articles fulfilled the inclusion criteria. The Cohen’s Kappa agreement test showed an index of 0.91 for full-text. Discussion: Four of five selected articles identified an increase of surface roughness on resin-contained CAD/CAM materials after toothbrushing. Although all the articles examined used different toothpastes with no homogeneous relative dentine abrasivity (RDA) and cycles of brushing, the findings are about the same. The possible reason is attributable to the compositions of the resin-contained CAD/CAM materials. Conclusions: The surface roughness of most resin-contained CAD/CAM materials was affected by artificial toothbrushing. Correct knowledge of the composition of the dental material and toothpastes is fundamental to avoid an increase of surface roughness on prosthetic rehabilitation
- …